From: <gregkh@linuxfoundation.org>
To: hramrach@gmail.com, broonie@kernel.org,
gregkh@linuxfoundation.org, maxime.ripard@free-electrons.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "spi: sunxi: fix transfer timeout" has been added to the 4.6-stable tree
Date: Wed, 03 Aug 2016 08:05:56 +0200 [thread overview]
Message-ID: <147020435620493@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
spi: sunxi: fix transfer timeout
to the 4.6-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
spi-sunxi-fix-transfer-timeout.patch
and it can be found in the queue-4.6 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 719bd6542044efd9b338a53dba1bef45f40ca169 Mon Sep 17 00:00:00 2001
From: Michal Suchanek <hramrach@gmail.com>
Date: Mon, 13 Jun 2016 17:46:49 +0000
Subject: spi: sunxi: fix transfer timeout
From: Michal Suchanek <hramrach@gmail.com>
commit 719bd6542044efd9b338a53dba1bef45f40ca169 upstream.
The trasfer timeout is fixed at 1000 ms. Reading a 4Mbyte flash over
1MHz SPI bus takes way longer than that. Calculate the timeout from the
actual time the transfer is supposed to take and multiply by 2 for good
measure.
Signed-off-by: Michal Suchanek <hramrach@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/spi/spi-sun4i.c | 10 +++++++++-
drivers/spi/spi-sun6i.c | 10 +++++++++-
2 files changed, 18 insertions(+), 2 deletions(-)
--- a/drivers/spi/spi-sun4i.c
+++ b/drivers/spi/spi-sun4i.c
@@ -173,6 +173,7 @@ static int sun4i_spi_transfer_one(struct
{
struct sun4i_spi *sspi = spi_master_get_devdata(master);
unsigned int mclk_rate, div, timeout;
+ unsigned int start, end, tx_time;
unsigned int tx_len = 0;
int ret = 0;
u32 reg;
@@ -279,9 +280,16 @@ static int sun4i_spi_transfer_one(struct
reg = sun4i_spi_read(sspi, SUN4I_CTL_REG);
sun4i_spi_write(sspi, SUN4I_CTL_REG, reg | SUN4I_CTL_XCH);
+ tx_time = max(tfr->len * 8 * 2 / (tfr->speed_hz / 1000), 100U);
+ start = jiffies;
timeout = wait_for_completion_timeout(&sspi->done,
- msecs_to_jiffies(1000));
+ msecs_to_jiffies(tx_time));
+ end = jiffies;
if (!timeout) {
+ dev_warn(&master->dev,
+ "%s: timeout transferring %u bytes@%iHz for %i(%i)ms",
+ dev_name(&spi->dev), tfr->len, tfr->speed_hz,
+ jiffies_to_msecs(end - start), tx_time);
ret = -ETIMEDOUT;
goto out;
}
--- a/drivers/spi/spi-sun6i.c
+++ b/drivers/spi/spi-sun6i.c
@@ -160,6 +160,7 @@ static int sun6i_spi_transfer_one(struct
{
struct sun6i_spi *sspi = spi_master_get_devdata(master);
unsigned int mclk_rate, div, timeout;
+ unsigned int start, end, tx_time;
unsigned int tx_len = 0;
int ret = 0;
u32 reg;
@@ -269,9 +270,16 @@ static int sun6i_spi_transfer_one(struct
reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG);
sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg | SUN6I_TFR_CTL_XCH);
+ tx_time = max(tfr->len * 8 * 2 / (tfr->speed_hz / 1000), 100U);
+ start = jiffies;
timeout = wait_for_completion_timeout(&sspi->done,
- msecs_to_jiffies(1000));
+ msecs_to_jiffies(tx_time));
+ end = jiffies;
if (!timeout) {
+ dev_warn(&master->dev,
+ "%s: timeout transferring %u bytes@%iHz for %i(%i)ms",
+ dev_name(&spi->dev), tfr->len, tfr->speed_hz,
+ jiffies_to_msecs(end - start), tx_time);
ret = -ETIMEDOUT;
goto out;
}
Patches currently in stable-queue which might be from hramrach@gmail.com are
queue-4.6/spi-sun4i-fix-fifo-limit.patch
queue-4.6/spi-sunxi-fix-transfer-timeout.patch
reply other threads:[~2016-08-03 6:33 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=147020435620493@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=broonie@kernel.org \
--cc=hramrach@gmail.com \
--cc=maxime.ripard@free-electrons.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.