From: <gregkh@linuxfoundation.org>
To: tthayer@opensource.altera.com, gregkh@linuxfoundation.org,
mkl@pengutronix.de, richard.andrysek@gomtec.de
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "can: c_can: Update D_CAN TX and RX functions to 32 bit - fix Altera Cyclone access" has been added to the 4.6-stable tree
Date: Mon, 08 Aug 2016 15:42:45 +0200 [thread overview]
Message-ID: <1470663765109205@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
can: c_can: Update D_CAN TX and RX functions to 32 bit - fix Altera Cyclone access
to the 4.6-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
can-c_can-update-d_can-tx-and-rx-functions-to-32-bit-fix-altera-cyclone-access.patch
and it can be found in the queue-4.6 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 427460c83cdf55069eee49799a0caef7dde8df69 Mon Sep 17 00:00:00 2001
From: Thor Thayer <tthayer@opensource.altera.com>
Date: Thu, 16 Jun 2016 11:10:19 -0500
Subject: can: c_can: Update D_CAN TX and RX functions to 32 bit - fix Altera Cyclone access
From: Thor Thayer <tthayer@opensource.altera.com>
commit 427460c83cdf55069eee49799a0caef7dde8df69 upstream.
When testing CAN write floods on Altera's CycloneV, the first 2 bytes
are sometimes 0x00, 0x00 or corrupted instead of the values sent. Also
observed bytes 4 & 5 were corrupted in some cases.
The D_CAN Data registers are 32 bits and changing from 16 bit writes to
32 bit writes fixes the problem.
Testing performed on Altera CycloneV (D_CAN). Requesting tests on other
C_CAN & D_CAN platforms.
Reported-by: Richard Andrysek <richard.andrysek@gomtec.de>
Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/can/c_can/c_can.c | 38 +++++++++++++++++++++++++++++++-------
1 file changed, 31 insertions(+), 7 deletions(-)
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -332,9 +332,23 @@ static void c_can_setup_tx_object(struct
priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), ctrl);
- for (i = 0; i < frame->can_dlc; i += 2) {
- priv->write_reg(priv, C_CAN_IFACE(DATA1_REG, iface) + i / 2,
- frame->data[i] | (frame->data[i + 1] << 8));
+ if (priv->type == BOSCH_D_CAN) {
+ u32 data = 0, dreg = C_CAN_IFACE(DATA1_REG, iface);
+
+ for (i = 0; i < frame->can_dlc; i += 4, dreg += 2) {
+ data = (u32)frame->data[i];
+ data |= (u32)frame->data[i + 1] << 8;
+ data |= (u32)frame->data[i + 2] << 16;
+ data |= (u32)frame->data[i + 3] << 24;
+ priv->write_reg32(priv, dreg, data);
+ }
+ } else {
+ for (i = 0; i < frame->can_dlc; i += 2) {
+ priv->write_reg(priv,
+ C_CAN_IFACE(DATA1_REG, iface) + i / 2,
+ frame->data[i] |
+ (frame->data[i + 1] << 8));
+ }
}
}
@@ -402,10 +416,20 @@ static int c_can_read_msg_object(struct
} else {
int i, dreg = C_CAN_IFACE(DATA1_REG, iface);
- for (i = 0; i < frame->can_dlc; i += 2, dreg ++) {
- data = priv->read_reg(priv, dreg);
- frame->data[i] = data;
- frame->data[i + 1] = data >> 8;
+ if (priv->type == BOSCH_D_CAN) {
+ for (i = 0; i < frame->can_dlc; i += 4, dreg += 2) {
+ data = priv->read_reg32(priv, dreg);
+ frame->data[i] = data;
+ frame->data[i + 1] = data >> 8;
+ frame->data[i + 2] = data >> 16;
+ frame->data[i + 3] = data >> 24;
+ }
+ } else {
+ for (i = 0; i < frame->can_dlc; i += 2, dreg++) {
+ data = priv->read_reg(priv, dreg);
+ frame->data[i] = data;
+ frame->data[i + 1] = data >> 8;
+ }
}
}
Patches currently in stable-queue which might be from tthayer@opensource.altera.com are
queue-4.6/can-c_can-update-d_can-tx-and-rx-functions-to-32-bit-fix-altera-cyclone-access.patch
reply other threads:[~2016-08-08 13:42 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470663765109205@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=mkl@pengutronix.de \
--cc=richard.andrysek@gomtec.de \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tthayer@opensource.altera.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.