All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: stern@rowland.harvard.edu, gregkh@linuxfoundation.org,
	jake.lamberson1@gmail.com, roswest@cisco.com,
	stable@vger.kernel.org
Subject: patch "USB: validate wMaxPacketValue entries in endpoint descriptors" added to usb-linus
Date: Tue, 09 Aug 2016 16:14:31 +0200	[thread overview]
Message-ID: <147075207119691@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    USB: validate wMaxPacketValue entries in endpoint descriptors

to my usb git tree which can be found at
    git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.

The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.

If you have any questions about this process, please let me know.


>From aed9d65ac3278d4febd8665bd7db59ef53e825fe Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Mon, 1 Aug 2016 15:25:56 -0400
Subject: USB: validate wMaxPacketValue entries in endpoint descriptors

Erroneous or malicious endpoint descriptors may have non-zero bits in
reserved positions, or out-of-bounds values.  This patch helps prevent
these from causing problems by bounds-checking the wMaxPacketValue
entries in endpoint descriptors and capping the values at the maximum
allowed.

This issue was first discovered and tests were conducted by Jake Lamberson
<jake.lamberson1@gmail.com>, an intern working for Rosie Hall.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: roswest <roswest@cisco.com>
Tested-by: roswest <roswest@cisco.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/config.c | 66 ++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 63 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 31ccdccd7a04..051163189810 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -171,6 +171,31 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
 							ep, buffer, size);
 }
 
+static const unsigned short low_speed_maxpacket_maxes[4] = {
+	[USB_ENDPOINT_XFER_CONTROL] = 8,
+	[USB_ENDPOINT_XFER_ISOC] = 0,
+	[USB_ENDPOINT_XFER_BULK] = 0,
+	[USB_ENDPOINT_XFER_INT] = 8,
+};
+static const unsigned short full_speed_maxpacket_maxes[4] = {
+	[USB_ENDPOINT_XFER_CONTROL] = 64,
+	[USB_ENDPOINT_XFER_ISOC] = 1023,
+	[USB_ENDPOINT_XFER_BULK] = 64,
+	[USB_ENDPOINT_XFER_INT] = 64,
+};
+static const unsigned short high_speed_maxpacket_maxes[4] = {
+	[USB_ENDPOINT_XFER_CONTROL] = 64,
+	[USB_ENDPOINT_XFER_ISOC] = 1024,
+	[USB_ENDPOINT_XFER_BULK] = 512,
+	[USB_ENDPOINT_XFER_INT] = 1023,
+};
+static const unsigned short super_speed_maxpacket_maxes[4] = {
+	[USB_ENDPOINT_XFER_CONTROL] = 512,
+	[USB_ENDPOINT_XFER_ISOC] = 1024,
+	[USB_ENDPOINT_XFER_BULK] = 1024,
+	[USB_ENDPOINT_XFER_INT] = 1024,
+};
+
 static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
     int asnum, struct usb_host_interface *ifp, int num_ep,
     unsigned char *buffer, int size)
@@ -179,6 +204,8 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
 	struct usb_endpoint_descriptor *d;
 	struct usb_host_endpoint *endpoint;
 	int n, i, j, retval;
+	unsigned int maxp;
+	const unsigned short *maxpacket_maxes;
 
 	d = (struct usb_endpoint_descriptor *) buffer;
 	buffer += d->bLength;
@@ -286,6 +313,42 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
 			endpoint->desc.wMaxPacketSize = cpu_to_le16(8);
 	}
 
+	/* Validate the wMaxPacketSize field */
+	maxp = usb_endpoint_maxp(&endpoint->desc);
+
+	/* Find the highest legal maxpacket size for this endpoint */
+	i = 0;		/* additional transactions per microframe */
+	switch (to_usb_device(ddev)->speed) {
+	case USB_SPEED_LOW:
+		maxpacket_maxes = low_speed_maxpacket_maxes;
+		break;
+	case USB_SPEED_FULL:
+		maxpacket_maxes = full_speed_maxpacket_maxes;
+		break;
+	case USB_SPEED_HIGH:
+		/* Bits 12..11 are allowed only for HS periodic endpoints */
+		if (usb_endpoint_xfer_int(d) || usb_endpoint_xfer_isoc(d)) {
+			i = maxp & (BIT(12) | BIT(11));
+			maxp &= ~i;
+		}
+		/* fallthrough */
+	default:
+		maxpacket_maxes = high_speed_maxpacket_maxes;
+		break;
+	case USB_SPEED_SUPER:
+	case USB_SPEED_SUPER_PLUS:
+		maxpacket_maxes = super_speed_maxpacket_maxes;
+		break;
+	}
+	j = maxpacket_maxes[usb_endpoint_type(&endpoint->desc)];
+
+	if (maxp > j) {
+		dev_warn(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid maxpacket %d, setting to %d\n",
+		    cfgno, inum, asnum, d->bEndpointAddress, maxp, j);
+		maxp = j;
+		endpoint->desc.wMaxPacketSize = cpu_to_le16(i | maxp);
+	}
+
 	/*
 	 * Some buggy high speed devices have bulk endpoints using
 	 * maxpacket sizes other than 512.  High speed HCDs may not
@@ -293,9 +356,6 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
 	 */
 	if (to_usb_device(ddev)->speed == USB_SPEED_HIGH
 			&& usb_endpoint_xfer_bulk(d)) {
-		unsigned maxp;
-
-		maxp = usb_endpoint_maxp(&endpoint->desc) & 0x07ff;
 		if (maxp != 512)
 			dev_warn(ddev, "config %d interface %d altsetting %d "
 				"bulk endpoint 0x%X has invalid maxpacket %d\n",
-- 
2.9.2



                 reply	other threads:[~2016-08-09 14:14 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=147075207119691@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=jake.lamberson1@gmail.com \
    --cc=roswest@cisco.com \
    --cc=stable@vger.kernel.org \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.