From: Jagan Teki <jteki@openedev.com>
To: linux-mtd@lists.infradead.org
Cc: David Woodhouse <dwmw2@infradead.org>,
linux-kernel@vger.kernel.org, Jagan Teki <jteki@openedev.com>,
Brian Norris <computersforpeace@gmail.com>
Subject: [PATCH 4/6] mtd: spi-nor: Enable QPP for micron parts
Date: Wed, 10 Aug 2016 02:10:23 +0530 [thread overview]
Message-ID: <1470775225-19787-4-git-send-email-jteki@openedev.com> (raw)
In-Reply-To: <1470775225-19787-1-git-send-email-jteki@openedev.com>
Enable QPP support for micron flash parts.
Cc: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
---
drivers/mtd/spi-nor/spi-nor.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 24a077d..05596cf 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -878,17 +878,17 @@ static const struct flash_info spi_nor_ids[] = {
{ "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ | SPI_NOR_QUAD_WRITE) },
/* Micron */
- { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) },
- { "n25q032a", INFO(0x20bb16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) },
- { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) },
- { "n25q064a", INFO(0x20bb17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) },
- { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
- { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
- { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) },
- { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
- { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
- { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
- { "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
+ { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ | SPI_NOR_QUAD_WRITE) },
+ { "n25q032a", INFO(0x20bb16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ | SPI_NOR_QUAD_WRITE) },
+ { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_QUAD_WRITE) },
+ { "n25q064a", INFO(0x20bb17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_QUAD_WRITE) },
+ { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_QUAD_WRITE) },
+ { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_QUAD_WRITE) },
+ { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_QUAD_WRITE) },
+ { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | SPI_NOR_QUAD_WRITE) },
+ { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | SPI_NOR_QUAD_WRITE) },
+ { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | SPI_NOR_QUAD_WRITE) },
+ { "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | SPI_NOR_QUAD_WRITE) },
/* PMC */
{ "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
--
2.7.4
next prev parent reply other threads:[~2016-08-09 20:41 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-09 20:40 [PATCH 1/6] mtd: spi-nor: Add quad page program support Jagan Teki
2016-08-09 20:40 ` [PATCH 2/6] mtd: m25p80: Use spi-nor quad page program Jagan Teki
2016-08-09 20:40 ` [PATCH 3/6] mtd: spi-nor: Enable QPP for macronix parts Jagan Teki
2016-08-09 20:40 ` Jagan Teki [this message]
2016-08-09 20:40 ` [PATCH 5/6] mtd: spi-nor: Enable QPP for spansion parts Jagan Teki
2016-08-09 20:40 ` [PATCH 6/6] mtd: spi-nor: Enable QPP for winbond parts Jagan Teki
2016-08-29 13:24 ` [PATCH 1/6] mtd: spi-nor: Add quad page program support Jagan Teki
2016-09-22 14:29 ` Jagan Teki
2016-09-22 15:37 ` Boris Brezillon
2016-09-22 15:51 ` Cyrille Pitchen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470775225-19787-4-git-send-email-jteki@openedev.com \
--to=jteki@openedev.com \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.