From: <gregkh@linuxfoundation.org>
To: toshi.kani@hpe.com, akpm@linux-foundation.org, bp@alien8.de,
bp@suse.de, brgerst@gmail.com, dvlasenk@redhat.com,
gregkh@linuxfoundation.org, hpa@zytor.com, jgross@suse.com,
luto@amacapital.net, mcgrof@suse.com, mingo@kernel.org,
peterz@infradead.org, tglx@linutronix.de,
torvalds@linux-foundation.org, toshi.kani@hp.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "x86/mtrr: Fix PAT init handling when MTRR is disabled" has been added to the 4.6-stable tree
Date: Sun, 14 Aug 2016 18:00:45 +0200 [thread overview]
Message-ID: <147119044511413@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
x86/mtrr: Fix PAT init handling when MTRR is disabled
to the 4.6-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
x86-mtrr-fix-pat-init-handling-when-mtrr-is-disabled.patch
and it can be found in the queue-4.6 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From ad025a73f0e9344ac73ffe1b74c184033e08e7d5 Mon Sep 17 00:00:00 2001
From: Toshi Kani <toshi.kani@hpe.com>
Date: Wed, 23 Mar 2016 15:42:01 -0600
Subject: x86/mtrr: Fix PAT init handling when MTRR is disabled
From: Toshi Kani <toshi.kani@hpe.com>
commit ad025a73f0e9344ac73ffe1b74c184033e08e7d5 upstream.
get_mtrr_state() calls pat_init() on BSP even if MTRR is disabled.
This results in calling pat_init() on BSP only since APs do not call
pat_init() when MTRR is disabled. This inconsistency between BSP
and APs leads to undefined behavior.
Make BSP's calling condition to pat_init() consistent with AP's,
mtrr_ap_init() and mtrr_aps_init().
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: elliott@hpe.com
Cc: konrad.wilk@oracle.com
Cc: paul.gortmaker@windriver.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1458769323-24491-6-git-send-email-toshi.kani@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kernel/cpu/mtrr/generic.c | 24 ++++++++++++++----------
arch/x86/kernel/cpu/mtrr/main.c | 3 +++
arch/x86/kernel/cpu/mtrr/mtrr.h | 1 +
3 files changed, 18 insertions(+), 10 deletions(-)
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -444,11 +444,24 @@ static void __init print_mtrr_state(void
pr_debug("TOM2: %016llx aka %lldM\n", mtrr_tom2, mtrr_tom2>>20);
}
+/* PAT setup for BP. We need to go through sync steps here */
+void __init mtrr_bp_pat_init(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ prepare_set();
+
+ pat_init();
+
+ post_set();
+ local_irq_restore(flags);
+}
+
/* Grab all of the MTRR state for this CPU into *state */
bool __init get_mtrr_state(void)
{
struct mtrr_var_range *vrs;
- unsigned long flags;
unsigned lo, dummy;
unsigned int i;
@@ -481,15 +494,6 @@ bool __init get_mtrr_state(void)
mtrr_state_set = 1;
- /* PAT setup for BP. We need to go through sync steps here */
- local_irq_save(flags);
- prepare_set();
-
- pat_init();
-
- post_set();
- local_irq_restore(flags);
-
return !!(mtrr_state.enabled & MTRR_STATE_MTRR_ENABLED);
}
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -752,6 +752,9 @@ void __init mtrr_bp_init(void)
/* BIOS may override */
__mtrr_enabled = get_mtrr_state();
+ if (mtrr_enabled())
+ mtrr_bp_pat_init();
+
if (mtrr_cleanup(phys_addr)) {
changed_by_mtrr_cleanup = 1;
mtrr_if->set_all();
--- a/arch/x86/kernel/cpu/mtrr/mtrr.h
+++ b/arch/x86/kernel/cpu/mtrr/mtrr.h
@@ -52,6 +52,7 @@ void set_mtrr_prepare_save(struct set_mt
void fill_mtrr_var_range(unsigned int index,
u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi);
bool get_mtrr_state(void);
+void mtrr_bp_pat_init(void);
extern void set_mtrr_ops(const struct mtrr_ops *ops);
Patches currently in stable-queue which might be from toshi.kani@hpe.com are
queue-4.6/x86-mm-pat-replace-cpu_has_pat-with-boot_cpu_has.patch
queue-4.6/x86-mtrr-fix-xorg-crashes-in-qemu-sessions.patch
queue-4.6/libnvdimm-pfn-dax-fix-initialization-vs-autodetect-for-mode-alignment.patch
queue-4.6/x86-mm-pat-add-support-of-non-default-pat-msr-setting.patch
queue-4.6/x86-xen-pat-remove-pat-table-init-code-from-xen.patch
queue-4.6/x86-mtrr-fix-pat-init-handling-when-mtrr-is-disabled.patch
queue-4.6/x86-mm-pat-add-pat_disable-interface.patch
queue-4.6/x86-mm-pat-fix-bug_on-in-mmap_mem-on-qemu-i386.patch
queue-4.6/x86-pat-document-the-pat-initialization-sequence.patch
reply other threads:[~2016-08-14 16:01 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=147119044511413@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=bp@alien8.de \
--cc=bp@suse.de \
--cc=brgerst@gmail.com \
--cc=dvlasenk@redhat.com \
--cc=hpa@zytor.com \
--cc=jgross@suse.com \
--cc=luto@amacapital.net \
--cc=mcgrof@suse.com \
--cc=mingo@kernel.org \
--cc=peterz@infradead.org \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
--cc=toshi.kani@hp.com \
--cc=toshi.kani@hpe.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.