From: jimqu <Jim.Qu-5C7GfCeVMHo@public.gmane.org>
To: amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Cc: jimqu <Jim.Qu-5C7GfCeVMHo@public.gmane.org>
Subject: [PATCH] drm/amd/amdgpu: S3 resumed failed after 4-5 times loop
Date: Thu, 18 Aug 2016 20:42:11 +0800 [thread overview]
Message-ID: <1471524131-5357-1-git-send-email-Jim.Qu@amd.com> (raw)
phenomenon: software hang when device resume back, read UVD fence is 0xffffffff
and read pcie pid is 0xffff.
the issue is caused by VCE reset when update cg setting. according to HW programming
guide, adjust update VCE cg sequence.
Change-Id: I18b12eea21c045908cdd23f93a0b196b87bfed6c
Signed-off-by: JimQu <Jim.Qu@amd.com>
---
drivers/gpu/drm/amd/amdgpu/vce_v2_0.c | 123 +++++++++++++++++++++++-----------
1 file changed, 84 insertions(+), 39 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/vce_v2_0.c b/drivers/gpu/drm/amd/amdgpu/vce_v2_0.c
index 9e70df9..6ce7c07 100644
--- a/drivers/gpu/drm/amd/amdgpu/vce_v2_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/vce_v2_0.c
@@ -40,10 +40,12 @@
#define VCE_V2_0_FW_SIZE (256 * 1024)
#define VCE_V2_0_STACK_SIZE (64 * 1024)
#define VCE_V2_0_DATA_SIZE (23552 * AMDGPU_MAX_VCE_HANDLES)
+#define VCE_STATUS_VCPU_REPORT_FW_LOADED_MASK 0x02
static void vce_v2_0_mc_resume(struct amdgpu_device *adev);
static void vce_v2_0_set_ring_funcs(struct amdgpu_device *adev);
static void vce_v2_0_set_irq_funcs(struct amdgpu_device *adev);
+static int vce_v2_0_wait_for_idle(void *handle);
/**
* vce_v2_0_ring_get_rptr - get read pointer
@@ -96,6 +98,49 @@ static void vce_v2_0_ring_set_wptr(struct amdgpu_ring *ring)
WREG32(mmVCE_RB_WPTR2, ring->wptr);
}
+static int vce_v2_0_lmi_clean(struct amdgpu_device *adev)
+{
+ int i, j;
+
+ for (i = 0; i < 10; ++i) {
+ for (j = 0; j < 100; ++j) {
+ uint32_t status = RREG32(mmVCE_LMI_STATUS);
+
+ if (status & 0x337f)
+ return 0;
+ mdelay(10);
+ }
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int vce_v2_0_firmware_loaded(struct amdgpu_device *adev)
+{
+ int i, j;
+
+ for (i = 0; i < 10; ++i) {
+ for (j = 0; j < 100; ++j) {
+ uint32_t status = RREG32(mmVCE_STATUS);
+
+ if (status & VCE_STATUS_VCPU_REPORT_FW_LOADED_MASK)
+ return 0;
+ mdelay(10);
+ }
+
+ DRM_ERROR("VCE not responding, trying to reset the ECPU!!!\n");
+ WREG32_P(mmVCE_SOFT_RESET,
+ VCE_SOFT_RESET__ECPU_SOFT_RESET_MASK,
+ ~VCE_SOFT_RESET__ECPU_SOFT_RESET_MASK);
+ mdelay(10);
+ WREG32_P(mmVCE_SOFT_RESET, 0,
+ ~VCE_SOFT_RESET__ECPU_SOFT_RESET_MASK);
+ mdelay(10);
+ }
+
+ return -ETIMEDOUT;
+}
+
/**
* vce_v2_0_start - start VCE block
*
@@ -106,7 +151,7 @@ static void vce_v2_0_ring_set_wptr(struct amdgpu_ring *ring)
static int vce_v2_0_start(struct amdgpu_device *adev)
{
struct amdgpu_ring *ring;
- int i, j, r;
+ int r;
vce_v2_0_mc_resume(adev);
@@ -137,26 +182,7 @@ static int vce_v2_0_start(struct amdgpu_device *adev)
WREG32_P(mmVCE_SOFT_RESET, 0, ~VCE_SOFT_RESET__ECPU_SOFT_RESET_MASK);
- for (i = 0; i < 10; ++i) {
- uint32_t status;
- for (j = 0; j < 100; ++j) {
- status = RREG32(mmVCE_STATUS);
- if (status & 2)
- break;
- mdelay(10);
- }
- r = 0;
- if (status & 2)
- break;
-
- DRM_ERROR("VCE not responding, trying to reset the ECPU!!!\n");
- WREG32_P(mmVCE_SOFT_RESET, VCE_SOFT_RESET__ECPU_SOFT_RESET_MASK,
- ~VCE_SOFT_RESET__ECPU_SOFT_RESET_MASK);
- mdelay(10);
- WREG32_P(mmVCE_SOFT_RESET, 0, ~VCE_SOFT_RESET__ECPU_SOFT_RESET_MASK);
- mdelay(10);
- r = -1;
- }
+ r = vce_v2_0_firmware_loaded(adev);
/* clear BUSY flag */
WREG32_P(mmVCE_STATUS, 0, ~1);
@@ -338,31 +364,50 @@ static void vce_v2_0_set_sw_cg(struct amdgpu_device *adev, bool gated)
static void vce_v2_0_set_dyn_cg(struct amdgpu_device *adev, bool gated)
{
- u32 orig, tmp;
+ if (vce_v2_0_wait_for_idle(adev)) {
+ DRM_INFO("VCE is busy, Can't set clock gateing");
+ return;
+ }
- tmp = RREG32(mmVCE_CLOCK_GATING_B);
- tmp &= ~0x00060006;
+ WREG32_P(mmVCE_LMI_CTRL2, 0x100, ~0x100);
+
+ if (vce_v2_0_lmi_clean(adev)) {
+ DRM_INFO("LMI is busy, Can't set clock gateing");
+ return;
+ }
+
+ WREG32_P(mmVCE_VCPU_CNTL, 0, ~VCE_VCPU_CNTL__CLK_EN_MASK);
+ WREG32_P(mmVCE_SOFT_RESET,
+ VCE_SOFT_RESET__ECPU_SOFT_RESET_MASK,
+ ~VCE_SOFT_RESET__ECPU_SOFT_RESET_MASK);
+ WREG32(mmVCE_STATUS, 0);
+
+ if (gated)
+ WREG32(mmVCE_CGTT_CLK_OVERRIDE, 0);
+ /* LMI_MC/LMI_UMC always set in dynamic, set {CGC_*_GATE_MODE, CGC_*_SW_GATE} = {0, 0} */
if (gated) {
- tmp |= 0xe10000;
+ /* Force CLOCK OFF , set {CGC_*_GATE_MODE, CGC_*_SW_GATE} = {*, 1} */
+ WREG32(mmVCE_CLOCK_GATING_B, 0xe90010);
} else {
- tmp |= 0xe1;
- tmp &= ~0xe10000;
+ /* Force CLOCK ON, set {CGC_*_GATE_MODE, CGC_*_SW_GATE} = {1, 0} */
+ WREG32(mmVCE_CLOCK_GATING_B, 0x800f1);
}
- WREG32(mmVCE_CLOCK_GATING_B, tmp);
- orig = tmp = RREG32(mmVCE_UENC_CLOCK_GATING);
- tmp &= ~0x1fe000;
- tmp &= ~0xff000000;
- if (tmp != orig)
- WREG32(mmVCE_UENC_CLOCK_GATING, tmp);
+ /* Set VCE_UENC_CLOCK_GATING always in dynamic mode {*_FORCE_ON, *_FORCE_OFF} = {0, 0}*/;
+ WREG32(mmVCE_UENC_CLOCK_GATING, 0x40);
- orig = tmp = RREG32(mmVCE_UENC_REG_CLOCK_GATING);
- tmp &= ~0x3fc;
- if (tmp != orig)
- WREG32(mmVCE_UENC_REG_CLOCK_GATING, tmp);
+ /* set VCE_UENC_REG_CLOCK_GATING always in dynamic mode */
+ WREG32(mmVCE_UENC_REG_CLOCK_GATING, 0x00);
- if (gated)
- WREG32(mmVCE_CGTT_CLK_OVERRIDE, 0);
+ WREG32_P(mmVCE_LMI_CTRL2, 0, ~0x100);
+ if(!gated) {
+ WREG32_P(mmVCE_VCPU_CNTL, VCE_VCPU_CNTL__CLK_EN_MASK, ~VCE_VCPU_CNTL__CLK_EN_MASK);
+ mdelay(100);
+ WREG32_P(mmVCE_SOFT_RESET, 0, ~VCE_SOFT_RESET__ECPU_SOFT_RESET_MASK);
+
+ vce_v2_0_firmware_loaded(adev);
+ WREG32_P(mmVCE_STATUS, 0, ~VCE_STATUS__JOB_BUSY_MASK);
+ }
}
static void vce_v2_0_disable_cg(struct amdgpu_device *adev)
--
1.9.1
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
next reply other threads:[~2016-08-18 12:42 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-18 12:42 jimqu [this message]
[not found] ` <1471524131-5357-1-git-send-email-Jim.Qu-5C7GfCeVMHo@public.gmane.org>
2016-08-18 13:27 ` [PATCH] drm/amd/amdgpu: S3 resumed failed after 4-5 times loop Christian König
[not found] ` <8b1a399d-0054-c356-8775-60cdd83d5004-ANTagKRnAhcb1SvskN2V4Q@public.gmane.org>
2016-08-18 15:24 ` Zhu, Rex
[not found] ` <CY4PR12MB1687869929F2F96EF9541E0BFB150-rpdhrqHFk06Y0SjTqZDccQdYzm3356FpvxpqHgZTriW3zl9H0oFU5g@public.gmane.org>
2016-08-19 0:48 ` 答复: " Qu, Jim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1471524131-5357-1-git-send-email-Jim.Qu@amd.com \
--to=jim.qu-5c7gfcevmho@public.gmane.org \
--cc=amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.