diff for duplicates of <1471893103-4593-1-git-send-email-olimpiu@arcticsand.com> diff --git a/a/1.txt b/N1/1.txt index 95f6981..264f244 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,7 +1,7 @@ This is the driver for the Arctic Sand Technologies Inc. ARCXCNN LED backlight IC family -Signed-off-by: Olimpiu Dejeu <olimpiu@arcticsand.com> +Signed-off-by: Olimpiu Dejeu <olimpiu-eV7fy4qpoLhpLGFMi4vTTA@public.gmane.org> --- drivers/video/backlight/Kconfig | 7 + @@ -109,7 +109,7 @@ index 0000000..7adfca3 +module_param_named(iledstr, s_iledstr, int, 0644); +MODULE_PARM_DESC(iledstr, "Initial LED String (when no plat data)"); + -+static int s_retries = 2; /* 1 = only one try */ ++static int s_retries = 2; /* 1 == only one try */ +module_param_named(retries, s_retries, int, 0644); +MODULE_PARM_DESC(retries, "I2C retries attempted"); + @@ -225,17 +225,17 @@ index 0000000..7adfca3 + brightness = 0; + + /* set brightness */ -+ if (lp->mode = PWM_BASED) ++ if (lp->mode == PWM_BASED) + arcxcnn_pwm_ctrl(lp, brightness, bl->props.max_brightness); -+ else if (lp->mode = REGISTER_BASED) ++ else if (lp->mode == REGISTER_BASED) + arcxcnn_set_brightness(lp, brightness); + + /* set power-on/off/save modes */ -+ if (bl->props.power = 0) ++ if (bl->props.power == 0) + /* take out of standby */ + arcxcnn_update_bit(lp, ARCXCNN_CMD, ARCXCNN_CMD_STDBY, 0); + else -+ /* 1-3 = power save, 4 = off ++ /* 1-3 == power save, 4 = off + * place in low-power standby mode + */ + arcxcnn_update_bit(lp, ARCXCNN_CMD, @@ -301,7 +301,7 @@ index 0000000..7adfca3 + + if (ledstr != lp->pdata->ledstr) { + /* don't allow 0 for ledstr, use power to turn all off */ -+ if (ledstr = 0) ++ if (ledstr == 0) + return 0; + lp->pdata->ledstr = ledstr & 0x3F; + arcxcnn_update_bit(lp, ARCXCNN_LEDEN, @@ -316,9 +316,9 @@ index 0000000..7adfca3 + struct arcxcnn *lp = dev_get_drvdata(dev); + char *strmode = NULL; + -+ if (lp->mode = PWM_BASED) ++ if (lp->mode == PWM_BASED) + strmode = "pwm based"; -+ else if (lp->mode = REGISTER_BASED) ++ else if (lp->mode == REGISTER_BASED) + strmode = "register based"; + + return scnprintf(buf, PAGE_SIZE, "%s\n", strmode); @@ -553,7 +553,7 @@ index 0000000..7adfca3 +module_i2c_driver(arcxcnn_driver); + +MODULE_LICENSE("GPL v2"); -+MODULE_AUTHOR("Brian Dodge <bdodge09@outlook.com>"); ++MODULE_AUTHOR("Brian Dodge <bdodge09-1ViLX0X+lBJBDgjK7y7TUQ@public.gmane.org>"); +MODULE_DESCRIPTION("ARCXCNN Backlight driver"); diff --git a/include/linux/i2c/arcxcnn.h b/include/linux/i2c/arcxcnn.h new file mode 100644 @@ -605,3 +605,8 @@ index 0000000..a9b7922 +#endif -- 1.9.1 + +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index 94148fd..109c229 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,6 +1,6 @@ - "From\0Olimpiu Dejeu <olimpiu@arcticsand.com>\0" + "From\0Olimpiu Dejeu <olimpiu-eV7fy4qpoLhpLGFMi4vTTA@public.gmane.org>\0" "Subject\0[PATCH] backlight: arcxcc: add support for ArcticSand devices\0" - "Date\0Mon, 22 Aug 2016 19:11:43 +0000\0" + "Date\0Mon, 22 Aug 2016 15:11:43 -0400\0" "To\0lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org" linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org @@ -12,7 +12,7 @@ "This is the driver for the Arctic Sand Technologies Inc. ARCXCNN LED\n" "backlight IC family\n" "\n" - "Signed-off-by: Olimpiu Dejeu <olimpiu@arcticsand.com>\n" + "Signed-off-by: Olimpiu Dejeu <olimpiu-eV7fy4qpoLhpLGFMi4vTTA@public.gmane.org>\n" "\n" "---\n" " drivers/video/backlight/Kconfig | 7 +\n" @@ -120,7 +120,7 @@ "+module_param_named(iledstr, s_iledstr, int, 0644);\n" "+MODULE_PARM_DESC(iledstr, \"Initial LED String (when no plat data)\");\n" "+\n" - "+static int s_retries = 2; /* 1 = only one try */\n" + "+static int s_retries = 2; /* 1 == only one try */\n" "+module_param_named(retries, s_retries, int, 0644);\n" "+MODULE_PARM_DESC(retries, \"I2C retries attempted\");\n" "+\n" @@ -236,17 +236,17 @@ "+\t\tbrightness = 0;\n" "+\n" "+\t/* set brightness */\n" - "+\tif (lp->mode = PWM_BASED)\n" + "+\tif (lp->mode == PWM_BASED)\n" "+\t\tarcxcnn_pwm_ctrl(lp, brightness, bl->props.max_brightness);\n" - "+\telse if (lp->mode = REGISTER_BASED)\n" + "+\telse if (lp->mode == REGISTER_BASED)\n" "+\t\tarcxcnn_set_brightness(lp, brightness);\n" "+\n" "+\t/* set power-on/off/save modes */\n" - "+\tif (bl->props.power = 0)\n" + "+\tif (bl->props.power == 0)\n" "+\t\t/* take out of standby */\n" "+\t\tarcxcnn_update_bit(lp, ARCXCNN_CMD, ARCXCNN_CMD_STDBY, 0);\n" "+\telse\n" - "+\t\t/* 1-3 = power save, 4 = off\n" + "+\t\t/* 1-3 == power save, 4 = off\n" "+\t\t * place in low-power standby mode\n" "+\t\t */\n" "+\t\tarcxcnn_update_bit(lp, ARCXCNN_CMD,\n" @@ -312,7 +312,7 @@ "+\n" "+\tif (ledstr != lp->pdata->ledstr) {\n" "+\t\t/* don't allow 0 for ledstr, use power to turn all off */\n" - "+\t\tif (ledstr = 0)\n" + "+\t\tif (ledstr == 0)\n" "+\t\t\treturn 0;\n" "+\t\tlp->pdata->ledstr = ledstr & 0x3F;\n" "+\t\tarcxcnn_update_bit(lp, ARCXCNN_LEDEN,\n" @@ -327,9 +327,9 @@ "+\tstruct arcxcnn *lp = dev_get_drvdata(dev);\n" "+\tchar *strmode = NULL;\n" "+\n" - "+\tif (lp->mode = PWM_BASED)\n" + "+\tif (lp->mode == PWM_BASED)\n" "+\t\tstrmode = \"pwm based\";\n" - "+\telse if (lp->mode = REGISTER_BASED)\n" + "+\telse if (lp->mode == REGISTER_BASED)\n" "+\t\tstrmode = \"register based\";\n" "+\n" "+\treturn scnprintf(buf, PAGE_SIZE, \"%s\\n\", strmode);\n" @@ -564,7 +564,7 @@ "+module_i2c_driver(arcxcnn_driver);\n" "+\n" "+MODULE_LICENSE(\"GPL v2\");\n" - "+MODULE_AUTHOR(\"Brian Dodge <bdodge09@outlook.com>\");\n" + "+MODULE_AUTHOR(\"Brian Dodge <bdodge09-1ViLX0X+lBJBDgjK7y7TUQ@public.gmane.org>\");\n" "+MODULE_DESCRIPTION(\"ARCXCNN Backlight driver\");\n" "diff --git a/include/linux/i2c/arcxcnn.h b/include/linux/i2c/arcxcnn.h\n" "new file mode 100644\n" @@ -615,6 +615,11 @@ "+\n" "+#endif\n" "-- \n" - 1.9.1 + "1.9.1\n" + "\n" + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -dc2a248c87b167b82a40efc1c2eacd879375de9e6133831cd071eff56fe356ca +4e9c8f95955220c80cc91b990c1e6b06acc345431d802506cf278e74d186d0bd
diff --git a/a/1.txt b/N2/1.txt index 95f6981..c87019c 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -109,7 +109,7 @@ index 0000000..7adfca3 +module_param_named(iledstr, s_iledstr, int, 0644); +MODULE_PARM_DESC(iledstr, "Initial LED String (when no plat data)"); + -+static int s_retries = 2; /* 1 = only one try */ ++static int s_retries = 2; /* 1 == only one try */ +module_param_named(retries, s_retries, int, 0644); +MODULE_PARM_DESC(retries, "I2C retries attempted"); + @@ -225,17 +225,17 @@ index 0000000..7adfca3 + brightness = 0; + + /* set brightness */ -+ if (lp->mode = PWM_BASED) ++ if (lp->mode == PWM_BASED) + arcxcnn_pwm_ctrl(lp, brightness, bl->props.max_brightness); -+ else if (lp->mode = REGISTER_BASED) ++ else if (lp->mode == REGISTER_BASED) + arcxcnn_set_brightness(lp, brightness); + + /* set power-on/off/save modes */ -+ if (bl->props.power = 0) ++ if (bl->props.power == 0) + /* take out of standby */ + arcxcnn_update_bit(lp, ARCXCNN_CMD, ARCXCNN_CMD_STDBY, 0); + else -+ /* 1-3 = power save, 4 = off ++ /* 1-3 == power save, 4 = off + * place in low-power standby mode + */ + arcxcnn_update_bit(lp, ARCXCNN_CMD, @@ -301,7 +301,7 @@ index 0000000..7adfca3 + + if (ledstr != lp->pdata->ledstr) { + /* don't allow 0 for ledstr, use power to turn all off */ -+ if (ledstr = 0) ++ if (ledstr == 0) + return 0; + lp->pdata->ledstr = ledstr & 0x3F; + arcxcnn_update_bit(lp, ARCXCNN_LEDEN, @@ -316,9 +316,9 @@ index 0000000..7adfca3 + struct arcxcnn *lp = dev_get_drvdata(dev); + char *strmode = NULL; + -+ if (lp->mode = PWM_BASED) ++ if (lp->mode == PWM_BASED) + strmode = "pwm based"; -+ else if (lp->mode = REGISTER_BASED) ++ else if (lp->mode == REGISTER_BASED) + strmode = "register based"; + + return scnprintf(buf, PAGE_SIZE, "%s\n", strmode); diff --git a/a/content_digest b/N2/content_digest index 94148fd..d2f2acd 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -1,12 +1,12 @@ "From\0Olimpiu Dejeu <olimpiu@arcticsand.com>\0" "Subject\0[PATCH] backlight: arcxcc: add support for ArcticSand devices\0" - "Date\0Mon, 22 Aug 2016 19:11:43 +0000\0" - "To\0lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org" - linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org - " jg1.han-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org\0" - "Cc\0Olimpiu Dejeu <olimpiu-eV7fy4qpoLhpLGFMi4vTTA@public.gmane.org>\0" + "Date\0Mon, 22 Aug 2016 15:11:43 -0400\0" + "To\0lee.jones@linaro.org" + linux-kernel@vger.kernel.org + linux-fbdev@vger.kernel.org + devicetree@vger.kernel.org + " jg1.han@samsung.com\0" + "Cc\0Olimpiu Dejeu <olimpiu@arcticsand.com>\0" "\00:1\0" "b\0" "This is the driver for the Arctic Sand Technologies Inc. ARCXCNN LED\n" @@ -120,7 +120,7 @@ "+module_param_named(iledstr, s_iledstr, int, 0644);\n" "+MODULE_PARM_DESC(iledstr, \"Initial LED String (when no plat data)\");\n" "+\n" - "+static int s_retries = 2; /* 1 = only one try */\n" + "+static int s_retries = 2; /* 1 == only one try */\n" "+module_param_named(retries, s_retries, int, 0644);\n" "+MODULE_PARM_DESC(retries, \"I2C retries attempted\");\n" "+\n" @@ -236,17 +236,17 @@ "+\t\tbrightness = 0;\n" "+\n" "+\t/* set brightness */\n" - "+\tif (lp->mode = PWM_BASED)\n" + "+\tif (lp->mode == PWM_BASED)\n" "+\t\tarcxcnn_pwm_ctrl(lp, brightness, bl->props.max_brightness);\n" - "+\telse if (lp->mode = REGISTER_BASED)\n" + "+\telse if (lp->mode == REGISTER_BASED)\n" "+\t\tarcxcnn_set_brightness(lp, brightness);\n" "+\n" "+\t/* set power-on/off/save modes */\n" - "+\tif (bl->props.power = 0)\n" + "+\tif (bl->props.power == 0)\n" "+\t\t/* take out of standby */\n" "+\t\tarcxcnn_update_bit(lp, ARCXCNN_CMD, ARCXCNN_CMD_STDBY, 0);\n" "+\telse\n" - "+\t\t/* 1-3 = power save, 4 = off\n" + "+\t\t/* 1-3 == power save, 4 = off\n" "+\t\t * place in low-power standby mode\n" "+\t\t */\n" "+\t\tarcxcnn_update_bit(lp, ARCXCNN_CMD,\n" @@ -312,7 +312,7 @@ "+\n" "+\tif (ledstr != lp->pdata->ledstr) {\n" "+\t\t/* don't allow 0 for ledstr, use power to turn all off */\n" - "+\t\tif (ledstr = 0)\n" + "+\t\tif (ledstr == 0)\n" "+\t\t\treturn 0;\n" "+\t\tlp->pdata->ledstr = ledstr & 0x3F;\n" "+\t\tarcxcnn_update_bit(lp, ARCXCNN_LEDEN,\n" @@ -327,9 +327,9 @@ "+\tstruct arcxcnn *lp = dev_get_drvdata(dev);\n" "+\tchar *strmode = NULL;\n" "+\n" - "+\tif (lp->mode = PWM_BASED)\n" + "+\tif (lp->mode == PWM_BASED)\n" "+\t\tstrmode = \"pwm based\";\n" - "+\telse if (lp->mode = REGISTER_BASED)\n" + "+\telse if (lp->mode == REGISTER_BASED)\n" "+\t\tstrmode = \"register based\";\n" "+\n" "+\treturn scnprintf(buf, PAGE_SIZE, \"%s\\n\", strmode);\n" @@ -617,4 +617,4 @@ "-- \n" 1.9.1 -dc2a248c87b167b82a40efc1c2eacd879375de9e6133831cd071eff56fe356ca +8f68eec90589abcdb590938495799674ab496c7c386e7598ac7fa6cfcbe8862b
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.