From: Paul Moore <pmoore@redhat.com>
To: Jeff Vander Stoep <jeffv@google.com>, linux-audit@redhat.com
Cc: linux-security-module@vger.kernel.org, selinux@tycho.nsa.gov
Subject: [PATCH] audit: consistently record PIDs with task_tgid_nr()
Date: Tue, 30 Aug 2016 17:13:21 -0400 [thread overview]
Message-ID: <147259160184.15526.16504125805093739705.stgit@localhost> (raw)
From: Paul Moore <paul@paul-moore.com>
Unfortunately we record PIDs in audit records using a variety of
methods despite the correct way being the use of task_tgid_nr().
This patch converts all of these callers, except for the case of
AUDIT_SET in audit_receive_msg() (see the comment in the code).
Reported-by: Jeff Vander Stoep <jeffv@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
---
kernel/audit.c | 8 +++++++-
kernel/auditsc.c | 12 ++++++------
security/lsm_audit.c | 4 ++--
3 files changed, 15 insertions(+), 9 deletions(-)
diff --git a/kernel/audit.c b/kernel/audit.c
index 8d528f9..02bde12 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -877,6 +877,12 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
return err;
}
if (s.mask & AUDIT_STATUS_PID) {
+ /* NOTE: we are using task_tgid_vnr() below because
+ * the s.pid value is relative to the namespace
+ * of the caller; at present this doesn't matter
+ * much since you can really only run auditd
+ * from the initial pid namespace, but something
+ * to keep in mind if this changes */
int new_pid = s.pid;
pid_t requesting_pid = task_tgid_vnr(current);
@@ -1917,7 +1923,7 @@ void audit_log_task_info(struct audit_buffer *ab, struct task_struct *tsk)
" euid=%u suid=%u fsuid=%u"
" egid=%u sgid=%u fsgid=%u tty=%s ses=%u",
task_ppid_nr(tsk),
- task_pid_nr(tsk),
+ task_tgid_nr(tsk),
from_kuid(&init_user_ns, audit_get_loginuid(tsk)),
from_kuid(&init_user_ns, cred->uid),
from_kgid(&init_user_ns, cred->gid),
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 2672d10..3824b1b 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -455,7 +455,7 @@ static int audit_filter_rules(struct task_struct *tsk,
switch (f->type) {
case AUDIT_PID:
- pid = task_pid_nr(tsk);
+ pid = task_tgid_nr(tsk);
result = audit_comparator(pid, f->op, f->val);
break;
case AUDIT_PPID:
@@ -1993,7 +1993,7 @@ static void audit_log_set_loginuid(kuid_t koldloginuid, kuid_t kloginuid,
loginuid = from_kuid(&init_user_ns, kloginuid),
tty = audit_get_tty(current);
- audit_log_format(ab, "pid=%d uid=%u", task_pid_nr(current), uid);
+ audit_log_format(ab, "pid=%d uid=%u", task_tgid_nr(current), uid);
audit_log_task_context(ab);
audit_log_format(ab, " old-auid=%u auid=%u tty=%s old-ses=%u ses=%u res=%d",
oldloginuid, loginuid, tty ? tty_name(tty) : "(none)",
@@ -2220,7 +2220,7 @@ void __audit_ptrace(struct task_struct *t)
{
struct audit_context *context = current->audit_context;
- context->target_pid = task_pid_nr(t);
+ context->target_pid = task_tgid_nr(t);
context->target_auid = audit_get_loginuid(t);
context->target_uid = task_uid(t);
context->target_sessionid = audit_get_sessionid(t);
@@ -2245,7 +2245,7 @@ int __audit_signal_info(int sig, struct task_struct *t)
if (audit_pid && t->tgid == audit_pid) {
if (sig == SIGTERM || sig == SIGHUP || sig == SIGUSR1 || sig == SIGUSR2) {
- audit_sig_pid = task_pid_nr(tsk);
+ audit_sig_pid = task_tgid_nr(tsk);
if (uid_valid(tsk->loginuid))
audit_sig_uid = tsk->loginuid;
else
@@ -2345,7 +2345,7 @@ int __audit_log_bprm_fcaps(struct linux_binprm *bprm,
void __audit_log_capset(const struct cred *new, const struct cred *old)
{
struct audit_context *context = current->audit_context;
- context->capset.pid = task_pid_nr(current);
+ context->capset.pid = task_tgid_nr(current);
context->capset.cap.effective = new->cap_effective;
context->capset.cap.inheritable = new->cap_effective;
context->capset.cap.permitted = new->cap_permitted;
@@ -2377,7 +2377,7 @@ static void audit_log_task(struct audit_buffer *ab)
from_kgid(&init_user_ns, gid),
sessionid);
audit_log_task_context(ab);
- audit_log_format(ab, " pid=%d comm=", task_pid_nr(current));
+ audit_log_format(ab, " pid=%d comm=", task_tgid_nr(current));
audit_log_untrustedstring(ab, get_task_comm(comm, current));
audit_log_d_path_exe(ab, current->mm);
}
diff --git a/security/lsm_audit.c b/security/lsm_audit.c
index cccbf30..45d927a 100644
--- a/security/lsm_audit.c
+++ b/security/lsm_audit.c
@@ -220,7 +220,7 @@ static void dump_common_audit_data(struct audit_buffer *ab,
*/
BUILD_BUG_ON(sizeof(a->u) > sizeof(void *)*2);
- audit_log_format(ab, " pid=%d comm=", task_pid_nr(current));
+ audit_log_format(ab, " pid=%d comm=", task_tgid_nr(current));
audit_log_untrustedstring(ab, memcpy(comm, current->comm, sizeof(comm)));
switch (a->type) {
@@ -294,7 +294,7 @@ static void dump_common_audit_data(struct audit_buffer *ab,
case LSM_AUDIT_DATA_TASK: {
struct task_struct *tsk = a->u.tsk;
if (tsk) {
- pid_t pid = task_pid_nr(tsk);
+ pid_t pid = task_tgid_nr(tsk);
if (pid) {
char comm[sizeof(tsk->comm)];
audit_log_format(ab, " opid=%d ocomm=", pid);
next reply other threads:[~2016-08-30 21:13 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-30 21:13 Paul Moore [this message]
2016-08-30 21:15 ` [PATCH] audit: consistently record PIDs with task_tgid_nr() Paul Moore
[not found] ` <CAGH-KgtOQx6XLStD++n8kBMKNky1t8or7KC2UyYxdaRXjQMhbA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-08-30 21:58 ` Jeffrey Vander Stoep
2016-08-30 21:58 ` Jeffrey Vander Stoep
2016-08-30 22:04 ` Paul Moore
2016-08-31 20:04 ` Paul Moore
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=147259160184.15526.16504125805093739705.stgit@localhost \
--to=pmoore@redhat.com \
--cc=jeffv@google.com \
--cc=linux-audit@redhat.com \
--cc=linux-security-module@vger.kernel.org \
--cc=selinux@tycho.nsa.gov \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.