From: <gregkh@linuxfoundation.org>
To: lee.jones@linaro.org, gregkh@linuxfoundation.org,
patrice.chotard@st.com, peter.griffin@linaro.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "ARM: dts: STiH410: Handle interconnect clock required by EHCI/OHCI (USB)" has been added to the 4.4-stable tree
Date: Thu, 22 Sep 2016 15:41:32 +0200 [thread overview]
Message-ID: <147455169214145@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
ARM: dts: STiH410: Handle interconnect clock required by EHCI/OHCI (USB)
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm-dts-stih410-handle-interconnect-clock-required-by-ehci-ohci-usb.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 7e9d2850a8db4e0d85a20bb692198bf2cc4be3b7 Mon Sep 17 00:00:00 2001
From: Lee Jones <lee.jones@linaro.org>
Date: Thu, 8 Sep 2016 11:11:00 +0200
Subject: ARM: dts: STiH410: Handle interconnect clock required by EHCI/OHCI (USB)
From: Lee Jones <lee.jones@linaro.org>
commit 7e9d2850a8db4e0d85a20bb692198bf2cc4be3b7 upstream.
The STiH4{07,10} platform contains some interconnect clocks which are used
by various IPs. If this clock isn't handled correctly by ST's EHCI/OHCI
drivers, their hub won't be found, the following error be shown and the
result will be non-working USB:
[ 97.221963] hub 2-1:1.0: hub_ext_port_status failed (err = -110)
Tested-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/boot/dts/stih410.dtsi | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -41,7 +41,8 @@
compatible = "st,st-ohci-300x";
reg = <0x9a03c00 0x100>;
interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
- clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+ clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+ <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
<&softreset STIH407_USB2_PORT0_SOFTRESET>;
reset-names = "power", "softreset";
@@ -57,7 +58,8 @@
interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
- clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+ clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+ <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
<&softreset STIH407_USB2_PORT0_SOFTRESET>;
reset-names = "power", "softreset";
@@ -71,7 +73,8 @@
compatible = "st,st-ohci-300x";
reg = <0x9a83c00 0x100>;
interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
- clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+ clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+ <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
<&softreset STIH407_USB2_PORT1_SOFTRESET>;
reset-names = "power", "softreset";
@@ -87,7 +90,8 @@
interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
- clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+ clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+ <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
<&softreset STIH407_USB2_PORT1_SOFTRESET>;
reset-names = "power", "softreset";
Patches currently in stable-queue which might be from lee.jones@linaro.org are
queue-4.4/arm-dts-stih407-family-provide-interconnect-clock-for-consumption-in-st-sdhci.patch
queue-4.4/iio-adc-ti_am335x_adc-increase-timeout-value-waiting-for-adc-sample.patch
queue-4.4/arm-dts-stih410-handle-interconnect-clock-required-by-ehci-ohci-usb.patch
reply other threads:[~2016-09-22 13:41 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=147455169214145@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=lee.jones@linaro.org \
--cc=patrice.chotard@st.com \
--cc=peter.griffin@linaro.org \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.