From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Denis Kirjanov <kda@linux-powerpc.org>,
"linuxppc-dev@lists.ozlabs.org" <linuxppc-dev@lists.ozlabs.org>
Subject: Re: [PATCH] i2c_powermac: shut up lockdep warning
Date: Tue, 27 Sep 2016 07:03:40 +1000 [thread overview]
Message-ID: <1474923820.2857.253.camel@kernel.crashing.org> (raw)
In-Reply-To: <CAOJe8K07TUCAOiHu3OkEHCmC1jhvwGo9Pd6SaxRX2h32RTGdQg@mail.gmail.com>
On Mon, 2016-09-26 at 14:00 +0300, Denis Kirjanov wrote:
>
>
> On Wednesday, September 21, 2016, Denis Kirjanov <kda@linux-powerpc.o
> rg> wrote:
> > That's unclear why lockdep shows the following warning but adding a
> > lockdep class to struct pmac_i2c_bus solves it
>
> HI Ben,
>
> could you give any comments on this?
I haven't quite figured out real reason for lockdep complaint, the
output is as usual terribly hard to parse, but adding a lock class
doesn't sound like something wrong to do so ...
Ben.
> Thanks!
> >
> > [ 20.507795]
> > ======================================================
> > [ 20.507796] [ INFO: possible circular locking dependency
> > detected ]
> > [ 20.507800] 4.8.0-rc7-00037-gd2ffb01 #21 Not tainted
> > [ 20.507801] ----------------------------------------------------
> > ---
> > [ 20.507803] swapper/0/1 is trying to acquire lock:
> > [ 20.507818] (&bus->mutex){+.+.+.}, at: [<c000000000052830>]
> > .pmac_i2c_open+0x30/0x100
> > [ 20.507819]
> > [ 20.507819] but task is already holding lock:
> > [ 20.507829] (&policy->rwsem){+.+.+.}, at: [<c00000000068adcc>]
> > .cpufreq_online+0x1ac/0x9d0
> > [ 20.507830]
> > [ 20.507830] which lock already depends on the new lock.
> > [ 20.507830]
> > [ 20.507832]
> > [ 20.507832] the existing dependency chain (in reverse order) is:
> > [ 20.507837]
> > [ 20.507837] -> #4 (&policy->rwsem){+.+.+.}:
> > [ 20.507844] [<c00000000082385c>] .down_write+0x6c/0x110
> > [ 20.507849] [<c00000000068adcc>]
> > .cpufreq_online+0x1ac/0x9d0
> > [ 20.507855] [<c0000000004d76d8>]
> > .subsys_interface_register+0xb8/0x110
> > [ 20.507860] [<c000000000689bb0>]
> > .cpufreq_register_driver+0x1d0/0x250
> > [ 20.507866] [<c000000000b4f8f4>]
> > .g5_cpufreq_init+0x9cc/0xa28
> > [ 20.507872] [<c00000000000a98c>]
> > .do_one_initcall+0x5c/0x1d0
> > [ 20.507878] [<c000000000b0f86c>]
> > .kernel_init_freeable+0x1ac/0x28c
> > [ 20.507883] [<c00000000000b3bc>] .kernel_init+0x1c/0x140
> > [ 20.507887] [<c0000000000098f4>]
> > .ret_from_kernel_thread+0x58/0x64
> > [ 20.507894]
> > [ 20.507894] -> #3 (subsys mutex#2){+.+.+.}:
> > [ 20.507899] [<c000000000820448>]
> > .mutex_lock_nested+0xa8/0x590
> > [ 20.507903] [<c0000000004d7f24>]
> > .bus_probe_device+0x44/0xe0
> > [ 20.507907] [<c0000000004d5208>] .device_add+0x508/0x730
> > [ 20.507911] [<c0000000004dd528>]
> > .register_cpu+0x118/0x190
> > [ 20.507916] [<c000000000b14450>]
> > .topology_init+0x148/0x248
> > [ 20.507921] [<c00000000000a98c>]
> > .do_one_initcall+0x5c/0x1d0
> > [ 20.507925] [<c000000000b0f86c>]
> > .kernel_init_freeable+0x1ac/0x28c
> > [ 20.507929] [<c00000000000b3bc>] .kernel_init+0x1c/0x140
> > [ 20.507934] [<c0000000000098f4>]
> > .ret_from_kernel_thread+0x58/0x64
> > [ 20.507939]
> > [ 20.507939] -> #2 (cpu_add_remove_lock){+.+.+.}:
> > [ 20.507944] [<c000000000820448>]
> > .mutex_lock_nested+0xa8/0x590
> > [ 20.507950] [<c000000000087a9c>]
> > .register_cpu_notifier+0x2c/0x70
> > [ 20.507955] [<c000000000b267e0>]
> > .spawn_ksoftirqd+0x18/0x4c
> > [ 20.507959] [<c00000000000a98c>]
> > .do_one_initcall+0x5c/0x1d0
> > [ 20.507964] [<c000000000b0f770>]
> > .kernel_init_freeable+0xb0/0x28c
> > [ 20.507968] [<c00000000000b3bc>] .kernel_init+0x1c/0x140
> > [ 20.507972] [<c0000000000098f4>]
> > .ret_from_kernel_thread+0x58/0x64
> > [ 20.507978]
> > [ 20.507978] -> #1 (&host->mutex){+.+.+.}:
> > [ 20.507982] [<c000000000820448>]
> > .mutex_lock_nested+0xa8/0x590
> > [ 20.507987] [<c0000000000527e8>] .kw_i2c_open+0x18/0x30
> > [ 20.507991] [<c000000000052894>]
> > .pmac_i2c_open+0x94/0x100
> > [ 20.507995] [<c000000000b220a0>]
> > .smp_core99_probe+0x260/0x410
> > [ 20.507999] [<c000000000b185bc>]
> > .smp_prepare_cpus+0x280/0x2ac
> > [ 20.508003] [<c000000000b0f748>]
> > .kernel_init_freeable+0x88/0x28c
> > [ 20.508008] [<c00000000000b3bc>] .kernel_init+0x1c/0x140
> > [ 20.508012] [<c0000000000098f4>]
> > .ret_from_kernel_thread+0x58/0x64
> > [ 20.508018]
> > [ 20.508018] -> #0 (&bus->mutex){+.+.+.}:
> > [ 20.508023] [<c0000000000ed5b4>] .lock_acquire+0x84/0x100
> > [ 20.508027] [<c000000000820448>]
> > .mutex_lock_nested+0xa8/0x590
> > [ 20.508032] [<c000000000052830>]
> > .pmac_i2c_open+0x30/0x100
> > [ 20.508037] [<c000000000052e14>]
> > .pmac_i2c_do_begin+0x34/0x120
> > [ 20.508040] [<c000000000056bc0>] .pmf_call_one+0x50/0xd0
> > [ 20.508045] [<c00000000068ff1c>]
> > .g5_pfunc_switch_volt+0x2c/0xc0
> > [ 20.508050] [<c00000000068fecc>]
> > .g5_pfunc_switch_freq+0x1cc/0x1f0
> > [ 20.508054] [<c00000000068fc2c>]
> > .g5_cpufreq_target+0x2c/0x40
> > [ 20.508058] [<c0000000006873ec>]
> > .__cpufreq_driver_target+0x23c/0x840
> > [ 20.508062] [<c00000000068c798>]
> > .cpufreq_gov_performance_limits+0x18/0x30
> > [ 20.508067] [<c00000000068915c>]
> > .cpufreq_start_governor+0xac/0x100
> > [ 20.508071] [<c00000000068a788>]
> > .cpufreq_set_policy+0x208/0x260
> > [ 20.508076] [<c00000000068abdc>]
> > .cpufreq_init_policy+0x6c/0xb0
> > [ 20.508081] [<c00000000068ae70>]
> > .cpufreq_online+0x250/0x9d0
> > [ 20.508085] [<c0000000004d76d8>]
> > .subsys_interface_register+0xb8/0x110
> > [ 20.508090] [<c000000000689bb0>]
> > .cpufreq_register_driver+0x1d0/0x250
> > [ 20.508094] [<c000000000b4f8f4>]
> > .g5_cpufreq_init+0x9cc/0xa28
> > [ 20.508099] [<c00000000000a98c>]
> > .do_one_initcall+0x5c/0x1d0
> > [ 20.508103] [<c000000000b0f86c>]
> > .kernel_init_freeable+0x1ac/0x28c
> > [ 20.508107] [<c00000000000b3bc>] .kernel_init+0x1c/0x140
> > [ 20.508112] [<c0000000000098f4>]
> > .ret_from_kernel_thread+0x58/0x64
> > [ 20.508113]
> > [ 20.508113] other info that might help us debug this:
> > [ 20.508113]
> > [ 20.508121] Chain exists of:
> > [ 20.508121] &bus->mutex --> subsys mutex#2 --> &policy->rwsem
> > [ 20.508121]
> > [ 20.508123] Possible unsafe locking scenario:
> > [ 20.508123]
> > [ 20.508124] CPU0 CPU1
> > [ 20.508125] ---- ----
> > [ 20.508128] lock(&policy->rwsem);
> > [ 20.508132] lock(subsys mutex#2);
> > [ 20.508135] lock(&policy->rwsem);
> > [ 20.508138] lock(&bus->mutex);
> > [ 20.508139]
> > [ 20.508139] *** DEADLOCK ***
> > [ 20.508139]
> > [ 20.508141] 3 locks held by swapper/0/1:
> > [ 20.508150] #0: (cpu_hotplug.lock){++++++}, at:
> > [<c000000000087838>] .get_online_cpus+0x48/0xc0
> > [ 20.508159] #1: (subsys mutex#2){+.+.+.}, at:
> > [<c0000000004d7670>] .subsys_interface_register+0x50/0x110
> > [ 20.508168] #2: (&policy->rwsem){+.+.+.}, at:
> > [<c00000000068adcc>] .cpufreq_online+0x1ac/0x9d0
> > [ 20.508169]
> > [ 20.508169] stack backtrace:
> > [ 20.508173] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.8.0-rc7-
> > 00037-gd2ffb01 #21
> > [ 20.508175] Call Trace:
> > [ 20.508180] [c0000000790c2b90] [c00000000082cc70]
> > .dump_stack+0xe0/0x14c (unreliable)
> > [ 20.508184] [c0000000790c2c20] [c000000000828c88]
> > .print_circular_bug+0x350/0x388
> > [ 20.508188] [c0000000790c2cd0] [c0000000000ecb0c]
> > .__lock_acquire+0x196c/0x1d30
> > [ 20.508192] [c0000000790c2e50] [c0000000000ed5b4]
> > .lock_acquire+0x84/0x100
> > [ 20.508196] [c0000000790c2f20] [c000000000820448]
> > .mutex_lock_nested+0xa8/0x590
> > [ 20.508201] [c0000000790c3030] [c000000000052830]
> > .pmac_i2c_open+0x30/0x100
> > [ 20.508206] [c0000000790c30c0] [c000000000052e14]
> > .pmac_i2c_do_begin+0x34/0x120
> > [ 20.508209] [c0000000790c3150] [c000000000056bc0]
> > .pmf_call_one+0x50/0xd0
> > [ 20.508213] [c0000000790c31e0] [c00000000068ff1c]
> > .g5_pfunc_switch_volt+0x2c/0xc0
> > [ 20.508217] [c0000000790c3250] [c00000000068fecc]
> > .g5_pfunc_switch_freq+0x1cc/0x1f0
> > [ 20.508221] [c0000000790c3320] [c00000000068fc2c]
> > .g5_cpufreq_target+0x2c/0x40
> > [ 20.508226] [c0000000790c3390] [c0000000006873ec]
> > .__cpufreq_driver_target+0x23c/0x840
> > [ 20.508230] [c0000000790c3440] [c00000000068c798]
> > .cpufreq_gov_performance_limits+0x18/0x30
> > [ 20.508235] [c0000000790c34b0] [c00000000068915c]
> > .cpufreq_start_governor+0xac/0x100
> > [ 20.508239] [c0000000790c3530] [c00000000068a788]
> > .cpufreq_set_policy+0x208/0x260
> > [ 20.508244] [c0000000790c35d0] [c00000000068abdc]
> > .cpufreq_init_policy+0x6c/0xb0
> > [ 20.508249] [c0000000790c3940] [c00000000068ae70]
> > .cpufreq_online+0x250/0x9d0
> > [ 20.508253] [c0000000790c3a30] [c0000000004d76d8]
> > .subsys_interface_register+0xb8/0x110
> > [ 20.508258] [c0000000790c3ad0] [c000000000689bb0]
> > .cpufreq_register_driver+0x1d0/0x250
> > [ 20.508262] [c0000000790c3b60] [c000000000b4f8f4]
> > .g5_cpufreq_init+0x9cc/0xa28
> > [ 20.508267] [c0000000790c3c20] [c00000000000a98c]
> > .do_one_initcall+0x5c/0x1d0
> > [ 20.508271] [c0000000790c3d00] [c000000000b0f86c]
> > .kernel_init_freeable+0x1ac/0x28c
> > [ 20.508276] [c0000000790c3db0] [c00000000000b3bc]
> > .kernel_init+0x1c/0x140
> > [ 20.508280] [c0000000790c3e30] [c0000000000098f4]
> > .ret_from_kernel_thread+0x58/0x64
> >
> > Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
> > ---
> > arch/powerpc/platforms/powermac/low_i2c.c | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/arch/powerpc/platforms/powermac/low_i2c.c
> > b/arch/powerpc/platforms/powermac/low_i2c.c
> > index 6d6f277..0159363 100644
> > --- a/arch/powerpc/platforms/powermac/low_i2c.c
> > +++ b/arch/powerpc/platforms/powermac/low_i2c.c
> > @@ -90,6 +90,7 @@ struct pmac_i2c_bus
> > int opened;
> > int polled; /* open mode */
> > struct platform_device *platform_dev;
> > + struct lock_class_key lock_key;
> >
> > /* ops */
> > int (*open)(struct pmac_i2c_bus *bus);
> > @@ -587,6 +588,7 @@ static void __init kw_i2c_add(struct
> > pmac_i2c_host_kw *host,
> > bus->close = kw_i2c_close;
> > bus->xfer = kw_i2c_xfer;
> > mutex_init(&bus->mutex);
> > + lockdep_set_class(&bus->mutex, &bus->lock_key);
> > if (controller == busnode)
> > bus->flags = pmac_i2c_multibus;
> > list_add(&bus->link, &pmac_i2c_busses);
> > @@ -815,6 +817,7 @@ static void __init pmu_i2c_probe(void)
> > bus->hostdata = bus + 1;
> > bus->xfer = pmu_i2c_xfer;
> > mutex_init(&bus->mutex);
> > + lockdep_set_class(&bus->mutex, &bus->lock_key);
> > bus->flags = pmac_i2c_multibus;
> > list_add(&bus->link, &pmac_i2c_busses);
> >
> > @@ -938,6 +941,7 @@ static void __init smu_i2c_probe(void)
> > bus->hostdata = bus + 1;
> > bus->xfer = smu_i2c_xfer;
> > mutex_init(&bus->mutex);
> > + lockdep_set_class(&bus->mutex, &bus->lock_key);
> > bus->flags = 0;
> > list_add(&bus->link, &pmac_i2c_busses);
> >
> > --
> > 2.4.0
> >
> >
next prev parent reply other threads:[~2016-09-26 21:03 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-21 11:34 [PATCH] i2c_powermac: shut up lockdep warning Denis Kirjanov
2016-09-26 11:00 ` Denis Kirjanov
2016-09-26 21:03 ` Benjamin Herrenschmidt [this message]
2016-10-07 9:05 ` Denis Kirjanov
2016-10-10 5:35 ` Michael Ellerman
2016-10-10 7:25 ` Benjamin Herrenschmidt
2016-11-14 12:17 ` Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1474923820.2857.253.camel@kernel.crashing.org \
--to=benh@kernel.crashing.org \
--cc=kda@linux-powerpc.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.