Patch "regulator: qcom_spmi: Update mvs1/mvs2 switches on pm8941" has been added to the 4.4-stable tree

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    regulator: qcom_spmi: Update mvs1/mvs2 switches on pm8941

to the 4.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     regulator-qcom_spmi-update-mvs1-mvs2-switches-on-pm8941.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 93bfe79b03365f410aa91caf04263173c008ecdf Mon Sep 17 00:00:00 2001
From: Stephen Boyd <stephen.boyd@linaro.org>
Date: Sat, 25 Jun 2016 22:52:12 -0700
Subject: regulator: qcom_spmi: Update mvs1/mvs2 switches on pm8941

From: Stephen Boyd <stephen.boyd@linaro.org>

commit 93bfe79b03365f410aa91caf04263173c008ecdf upstream.

The mvs1 and mvs2 switches are actually called 5vs1 and 5vs2 on
some datasheets. Let's rename them to match the datasheets and
also match the RPM based regulator driver which calls these by
their 5vs names (see qcom_smd-regulator.c). There aren't any
users of these regulators so far, so there aren't any concerns of
DT ABI breakage here. While we're here making updates to the
switches, also mandate usage of the OCP irq for these switches
too.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: e92a4047419c ("regulator: Add QCOM SPMI regulator driver")
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt |    2 +-
 drivers/regulator/qcom_spmi-regulator.c                             |    4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

--- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
@@ -83,7 +83,7 @@ pm8916:
 pm8941:
 	s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
 	l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3,
-	mvs1, mvs2
+	5vs1, 5vs2
 
 The content of each sub-node is defined by the standard binding for regulators -
 see regulator.txt - with additional custom properties described below:
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -1470,8 +1470,8 @@ static const struct spmi_regulator_data
 	{ "lvs1", 0x8000, "vdd_l2_lvs_1_2_3", },
 	{ "lvs2", 0x8100, "vdd_l2_lvs_1_2_3", },
 	{ "lvs3", 0x8200, "vdd_l2_lvs_1_2_3", },
-	{ "mvs1", 0x8300, "vin_5vs", },
-	{ "mvs2", 0x8400, "vin_5vs", },
+	{ "5vs1", 0x8300, "vin_5vs", "ocp-5vs1", },
+	{ "5vs2", 0x8400, "vin_5vs", "ocp-5vs2", },
 	{ }
 };
 


Patches currently in stable-queue which might be from stephen.boyd@linaro.org are

queue-4.4/regulator-qcom_spmi-add-support-for-s4-supply-on-pm8941.patch
queue-4.4/regulator-qcom_spmi-update-mvs1-mvs2-switches-on-pm8941.patch
queue-4.4/regulator-qcom_spmi-add-support-for-get_mode-set_mode-on-switches.patch