[PATCH v5 0/5] Enable lspcon support for GEN9 devices

From: Shashank Sharma <shashank.sharma@intel.com>
To: imre.deak@intel.com
Cc: daniel.vetter@intel.com, intel-gfx@lists.freedesktop.org
Subject: [PATCH v5 0/5] Enable lspcon support for GEN9 devices
Date: Fri, 14 Oct 2016 14:54:22 +0530	[thread overview]
Message-ID: <1476437067-13237-1-git-send-email-shashank.sharma@intel.com> (raw)

LSPCON is essentially a dp++->hdmi adapter with dual mode of operation.

These modes are:
- Level Shifter mode: In LS mode, this device works as a type2 dp->hdmi
passive dongle, which steps up DP++ output to appropriate HDMI 1.4 signal.
This mode doesn't do any conversion at the protocol level.

- Protocol Converter mode: In PCON mode, this device acts as an
active DP++->HDMI 2.0 dongle, which converts the DP++ output to
compatible HDMI 2.0 output. In PCON mode, lspcon can support 4k@60
outputs, using DP HBR2 mode.

Many of Intel GEN9 devices come with in-built lspcon card
in motherboartd down mode. This patch series adds support for
lspcon devices in I915 driver.

While unit-testing this code, I was able to see a 4k@60 modeset with:
- BXT-T board
- Single HDMI 4k@60 display (ACER S)
- Ubuntu 14.04 desktop

V2: Worked on review comments from Ville
- In general, Ville suggested not to use the dual personality of
  DDI to drive lspcon, so this patch set drives it just as DP++ display.
  There is no separate detection for lspcon (hpd_pulse is good enough), and
  its being driven as a DP display with special initialization and EDID
  read sequence. To be able to do this, we driving lspcon in PCON mode only,
  where it can serve both HDMI1.3/HDMI1.4 sinks as well as 4k@60 capable
  HDMI 2.0 sinks. So compared to previous series, there is one patch less,
  as we have dropped lspcon detection patch.

V3: Addressed review comments from Rodrigo
    Details available with respective patch.

V4: Addressed review comments from Ville
    Details available with respective patch.

V5: Rebase, added a new patch for suspend/resume

Shashank Sharma (5):
  drm: Helper for lspcon in drm_dp_dual_mode
  drm/i915: Add lspcon support for I915 driver
  drm/i915: Parse VBT data for lspcon
  drm/i915: Enable lspcon initialization
  drm/i915: Add lspcon resume function

 drivers/gpu/drm/drm_dp_dual_mode_helper.c | 103 +++++++++++++++++++
 drivers/gpu/drm/i915/Makefile             |   1 +
 drivers/gpu/drm/i915/i915_drv.c           |   2 +
 drivers/gpu/drm/i915/i915_drv.h           |   5 +
 drivers/gpu/drm/i915/intel_bios.c         |  49 +++++++++
 drivers/gpu/drm/i915/intel_ddi.c          |  29 +++++-
 drivers/gpu/drm/i915/intel_drv.h          |  10 ++
 drivers/gpu/drm/i915/intel_lspcon.c       | 165 ++++++++++++++++++++++++++++++
 include/drm/drm_dp_dual_mode_helper.h     |  26 +++++
 9 files changed, 389 insertions(+), 1 deletion(-)
 create mode 100644 drivers/gpu/drm/i915/intel_lspcon.c

-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx