From: <gregkh@linuxfoundation.org>
To: anssi.hannula@iki.fi, gregkh@linuxfoundation.org,
regulars@d-dub.org.uk, tiwai@suse.de
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "ALSA: usb-audio: Extend DragonFly dB scale quirk to cover other variants" has been added to the 4.7-stable tree
Date: Fri, 14 Oct 2016 11:58:58 +0200 [thread overview]
Message-ID: <147643913894172@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
ALSA: usb-audio: Extend DragonFly dB scale quirk to cover other variants
to the 4.7-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
alsa-usb-audio-extend-dragonfly-db-scale-quirk-to-cover-other-variants.patch
and it can be found in the queue-4.7 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From eb1a74b7bea17eea31915c4f76385cefe69d9795 Mon Sep 17 00:00:00 2001
From: Anssi Hannula <anssi.hannula@iki.fi>
Date: Fri, 23 Sep 2016 06:43:47 +0300
Subject: ALSA: usb-audio: Extend DragonFly dB scale quirk to cover other variants
From: Anssi Hannula <anssi.hannula@iki.fi>
commit eb1a74b7bea17eea31915c4f76385cefe69d9795 upstream.
The DragonFly quirk added in 42e3121d90f4 ("ALSA: usb-audio: Add a more
accurate volume quirk for AudioQuest DragonFly") applies a custom dB map
on the volume control when its range is reported as 0..50 (0 .. 0.2dB).
However, there exists at least one other variant (hw v1.0c, as opposed
to the tested v1.2) which reports a different non-sensical volume range
(0..53) and the custom map is therefore not applied for that device.
This results in all of the volume change appearing close to 100% on
mixer UIs that utilize the dB TLV information.
Add a fallback case where no dB TLV is reported at all if the control
range is not 0..50 but still 0..N where N <= 1000 (3.9 dB). Also
restrict the quirk to only apply to the volume control as there is also
a mute control which would match the check otherwise.
Fixes: 42e3121d90f4 ("ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly")
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Reported-by: David W <regulars@d-dub.org.uk>
Tested-by: David W <regulars@d-dub.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/usb/mixer_quirks.c | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -1831,6 +1831,7 @@ void snd_usb_mixer_rc_memory_change(stru
}
static void snd_dragonfly_quirk_db_scale(struct usb_mixer_interface *mixer,
+ struct usb_mixer_elem_info *cval,
struct snd_kcontrol *kctl)
{
/* Approximation using 10 ranges based on output measurement on hw v1.2.
@@ -1848,10 +1849,19 @@ static void snd_dragonfly_quirk_db_scale
41, 50, TLV_DB_MINMAX_ITEM(-441, 0),
);
- usb_audio_info(mixer->chip, "applying DragonFly dB scale quirk\n");
- kctl->tlv.p = scale;
- kctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_TLV_READ;
- kctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK;
+ if (cval->min == 0 && cval->max == 50) {
+ usb_audio_info(mixer->chip, "applying DragonFly dB scale quirk (0-50 variant)\n");
+ kctl->tlv.p = scale;
+ kctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_TLV_READ;
+ kctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK;
+
+ } else if (cval->min == 0 && cval->max <= 1000) {
+ /* Some other clearly broken DragonFly variant.
+ * At least a 0..53 variant (hw v1.0) exists.
+ */
+ usb_audio_info(mixer->chip, "ignoring too narrow dB range on a DragonFly device");
+ kctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK;
+ }
}
void snd_usb_mixer_fu_apply_quirk(struct usb_mixer_interface *mixer,
@@ -1860,8 +1870,8 @@ void snd_usb_mixer_fu_apply_quirk(struct
{
switch (mixer->chip->usb_id) {
case USB_ID(0x21b4, 0x0081): /* AudioQuest DragonFly */
- if (unitid == 7 && cval->min == 0 && cval->max == 50)
- snd_dragonfly_quirk_db_scale(mixer, kctl);
+ if (unitid == 7 && cval->control == UAC_FU_VOLUME)
+ snd_dragonfly_quirk_db_scale(mixer, cval, kctl);
break;
}
}
Patches currently in stable-queue which might be from anssi.hannula@iki.fi are
queue-4.7/alsa-usb-audio-extend-dragonfly-db-scale-quirk-to-cover-other-variants.patch
reply other threads:[~2016-10-14 9:58 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=147643913894172@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=anssi.hannula@iki.fi \
--cc=regulars@d-dub.org.uk \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.