All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rob Clark <robdclark@gmail.com>
To: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Subject: [PATCH 4/6] drm/atomic: add new drm_debug bit to dump atomic state before commit
Date: Fri, 14 Oct 2016 19:55:51 -0400	[thread overview]
Message-ID: <1476489353-16261-5-git-send-email-robdclark@gmail.com> (raw)
In-Reply-To: <1476489353-16261-1-git-send-email-robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>
---
 drivers/gpu/drm/drm_atomic.c | 93 ++++++++++++++++++++++++++++++++++++++++++++
 include/drm/drmP.h           |  1 +
 include/drm/drm_crtc.h       | 37 ++++++++++++++++++
 3 files changed, 131 insertions(+)

diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index 7ebf375..3cc3cb5 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -30,6 +30,7 @@
 #include <drm/drm_atomic.h>
 #include <drm/drm_mode.h>
 #include <drm/drm_plane_helper.h>
+#include <drm/drm_print.h>
 #include <linux/sync_file.h>
 
 #include "drm_crtc_internal.h"
@@ -608,6 +609,28 @@ static int drm_atomic_crtc_check(struct drm_crtc *crtc,
 	return 0;
 }
 
+static void drm_atomic_crtc_print_state(struct drm_print *p,
+		const struct drm_crtc_state *state)
+{
+	struct drm_crtc *crtc = state->crtc;
+
+	drm_printf(p, "crtc[%u]: %s\n", crtc->base.id, crtc->name);
+	drm_printf(p, "\tenable=%d\n", state->enable);
+	drm_printf(p, "\tactive=%d\n", state->active);
+	drm_printf(p, "\tplanes_changed=%d\n", state->planes_changed);
+	drm_printf(p, "\tmode_changed=%d\n", state->mode_changed);
+	drm_printf(p, "\tactive_changed=%d\n", state->active_changed);
+	drm_printf(p, "\tconnectors_changed=%d\n", state->connectors_changed);
+	drm_printf(p, "\tcolor_mgmt_changed=%d\n", state->color_mgmt_changed);
+	drm_printf(p, "\tplane_mask=%x\n", state->plane_mask);
+	drm_printf(p, "\tconnector_mask=%x\n", state->connector_mask);
+	drm_printf(p, "\tencoder_mask=%x\n", state->encoder_mask);
+	drm_printf(p, "\tmode: " DRM_MODE_FMT "\n", DRM_MODE_ARG(&state->mode));
+
+	if (crtc->funcs->atomic_print_state)
+		crtc->funcs->atomic_print_state(p, state);
+}
+
 /**
  * drm_atomic_get_plane_state - get plane state
  * @state: global atomic state object
@@ -895,6 +918,38 @@ static int drm_atomic_plane_check(struct drm_plane *plane,
 	return 0;
 }
 
+static void drm_atomic_plane_print_state(struct drm_print *p,
+		const struct drm_plane_state *state)
+{
+	struct drm_plane *plane = state->plane;
+	struct drm_rect src  = drm_plane_state_src(state);
+	struct drm_rect dest = drm_plane_state_dest(state);
+
+	drm_printf(p, "plane[%u]: %s\n", plane->base.id, plane->name);
+	drm_printf(p, "\tcrtc=%s\n", state->crtc ? state->crtc->name : "(null)");
+	drm_printf(p, "\tfb=%u\n", state->fb ? state->fb->base.id : 0);
+	if (state->fb) {
+		struct drm_framebuffer *fb = state->fb;
+		int i, n = drm_format_num_planes(fb->pixel_format);
+
+		drm_printf(p, "\t\tformat=%s\n",
+				drm_get_format_name(fb->pixel_format));
+		drm_printf(p, "\t\tsize=%dx%d\n", fb->width, fb->height);
+		drm_printf(p, "\t\tlayers:\n");
+		for (i = 0; i < n; i++) {
+			drm_printf(p, "\t\t\tpitch[%d]=%u\n", i, fb->pitches[i]);
+			drm_printf(p, "\t\t\toffset[%d]=%u\n", i, fb->offsets[i]);
+			drm_printf(p, "\t\t\tmodifier[%d]=0x%llx\n", i, fb->modifier[i]);
+		}
+	}
+	drm_printf(p, "\tcrtc-pos=" DRM_RECT_FMT "\n", DRM_RECT_ARG(&dest));
+	drm_printf(p, "\tsrc-pos=" DRM_RECT_FP_FMT "\n", DRM_RECT_FP_ARG(&src));
+	drm_printf(p, "\trotation=%x\n", state->rotation);
+
+	if (plane->funcs->atomic_print_state)
+		plane->funcs->atomic_print_state(p, state);
+}
+
 /**
  * drm_atomic_get_connector_state - get connector state
  * @state: global atomic state object
@@ -1010,6 +1065,18 @@ int drm_atomic_connector_set_property(struct drm_connector *connector,
 }
 EXPORT_SYMBOL(drm_atomic_connector_set_property);
 
+static void drm_atomic_connector_print_state(struct drm_print *p,
+		const struct drm_connector_state *state)
+{
+	struct drm_connector *connector = state->connector;
+
+	drm_printf(p, "connector[%u]: %s\n", connector->base.id, connector->name);
+	drm_printf(p, "\tcrtc=%s\n", state->crtc ? state->crtc->name : "(null)");
+
+	if (connector->funcs->atomic_print_state)
+		connector->funcs->atomic_print_state(p, state);
+}
+
 /**
  * drm_atomic_connector_get_property - get property value from connector state
  * @connector: the drm connector to set a property on
@@ -1475,6 +1542,29 @@ int drm_atomic_nonblocking_commit(struct drm_atomic_state *state)
 }
 EXPORT_SYMBOL(drm_atomic_nonblocking_commit);
 
+static void drm_atomic_print_state(const struct drm_atomic_state *state)
+{
+	struct drm_print p = drm_print_info();
+	struct drm_plane *plane;
+	struct drm_plane_state *plane_state;
+	struct drm_crtc *crtc;
+	struct drm_crtc_state *crtc_state;
+	struct drm_connector *connector;
+	struct drm_connector_state *connector_state;
+	int i;
+
+	DRM_DEBUG_ATOMIC("checking %p\n", state);
+
+	for_each_plane_in_state(state, plane, plane_state, i)
+		drm_atomic_plane_print_state(&p, plane_state);
+
+	for_each_crtc_in_state(state, crtc, crtc_state, i)
+		drm_atomic_crtc_print_state(&p, crtc_state);
+
+	for_each_connector_in_state(state, connector, connector_state, i)
+		drm_atomic_connector_print_state(&p, connector_state);
+}
+
 /*
  * The big monstor ioctl
  */
@@ -1987,6 +2077,9 @@ retry:
 		 */
 		ret = drm_atomic_check_only(state);
 	} else {
+		if (unlikely(drm_debug & DRM_UT_STATE))
+			drm_atomic_print_state(state);
+
 		if (arg->flags & DRM_MODE_ATOMIC_OUT_FENCE)
 			install_out_fence(state, arg->count_out_fences,
 					  fence_state);
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index 7ffaa35..642d5da 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -133,6 +133,7 @@ struct dma_buf_attachment;
 #define DRM_UT_PRIME		0x08
 #define DRM_UT_ATOMIC		0x10
 #define DRM_UT_VBL		0x20
+#define DRM_UT_STATE		0x40
 
 extern __printf(2, 3)
 void drm_ut_debug_printk(const char *function_name,
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 856fdf8..d74d47a 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -44,6 +44,7 @@ struct drm_framebuffer;
 struct drm_object_properties;
 struct drm_file;
 struct drm_clip_rect;
+struct drm_print;
 struct device_node;
 struct fence;
 struct edid;
@@ -707,6 +708,18 @@ struct drm_crtc_funcs {
 				   const struct drm_crtc_state *state,
 				   struct drm_property *property,
 				   uint64_t *val);
+
+	/**
+	 * @atomic_print_state:
+	 *
+	 * If driver subclasses struct &drm_crtc_state, it should implement
+	 * this optional hook for printing state.
+	 *
+	 * Do not call this directly, use drm_atomic_crtc_print_state()
+	 * instead.
+	 */
+	void (*atomic_print_state)(struct drm_print *p,
+				   const struct drm_crtc_state *state);
 };
 
 /**
@@ -1132,6 +1145,18 @@ struct drm_connector_funcs {
 				   const struct drm_connector_state *state,
 				   struct drm_property *property,
 				   uint64_t *val);
+
+	/**
+	 * @atomic_print_state:
+	 *
+	 * If driver subclasses struct &drm_connector_state, it should
+	 * implement this optional hook for printing state.
+	 *
+	 * Do not call this directly, use drm_atomic_connector_print_state()
+	 * instead.
+	 */
+	void (*atomic_print_state)(struct drm_print *p,
+				   const struct drm_connector_state *state);
 };
 
 /**
@@ -1623,6 +1648,18 @@ struct drm_plane_funcs {
 				   const struct drm_plane_state *state,
 				   struct drm_property *property,
 				   uint64_t *val);
+
+	/**
+	 * @atomic_print_state:
+	 *
+	 * If driver subclasses struct &drm_plane_state, it should implement
+	 * this optional hook for printing state.
+	 *
+	 * Do not call this directly, use drm_atomic_plane_print_state()
+	 * instead.
+	 */
+	void (*atomic_print_state)(struct drm_print *p,
+				   const struct drm_plane_state *state);
 };
 
 enum drm_plane_type {
-- 
2.7.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2016-10-14 23:55 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-14 23:55 [PATCH 0/6] drm: add atomic state logging and debugfs Rob Clark
     [not found] ` <1476489353-16261-1-git-send-email-robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-10-14 23:55   ` [PATCH 1/6] drm: helper macros to print composite types Rob Clark
2016-10-17 17:00     ` Sean Paul
2016-10-14 23:55   ` [PATCH 2/6] drm: add helper for printing to log or seq_file Rob Clark
2016-10-17  6:38     ` Daniel Vetter
2016-10-17 11:59       ` Rob Clark
2016-10-17 12:30         ` Daniel Vetter
2016-10-17 12:35           ` Rob Clark
     [not found]     ` <1476489353-16261-3-git-send-email-robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-10-17 17:00       ` Sean Paul
2016-10-24 17:05         ` Rob Clark
2016-10-14 23:55   ` [PATCH 3/6] drm: add helpers to go from plane state to drm_rect Rob Clark
2016-10-17 17:00     ` Sean Paul
2016-10-14 23:55   ` [PATCH 5/6] drm/atomic: add debugfs file to dump out atomic state Rob Clark
2016-10-17 17:00     ` Sean Paul
2016-10-14 23:55   ` [PATCH 6/6] drm/msm/mdp5: add atomic_print_state support Rob Clark
     [not found]     ` <1476489353-16261-7-git-send-email-robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-10-17 17:00       ` Sean Paul
2016-10-14 23:55 ` Rob Clark [this message]
2016-10-17  6:31   ` [PATCH 4/6] drm/atomic: add new drm_debug bit to dump atomic state before commit Daniel Vetter
2016-10-17 17:00   ` Sean Paul
2016-10-15  0:19 ` [PATCH 0/6] drm: add atomic state logging and debugfs Rob Clark

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1476489353-16261-5-git-send-email-robdclark@gmail.com \
    --to=robdclark@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.