From: Lu Baolu <baolu.lu@linux.intel.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>,
Ingo Molnar <mingo@redhat.com>,
linux-usb@vger.kernel.org, x86@kernel.org,
linux-kernel@vger.kernel.org, Lu Baolu <baolu.lu@linux.intel.com>
Subject: [RESEND PATCH v2 2/4] x86: add support for earlyprintk via USB3 debug port
Date: Wed, 19 Oct 2016 08:18:23 +0800 [thread overview]
Message-ID: <1476836305-4468-3-git-send-email-baolu.lu@linux.intel.com> (raw)
In-Reply-To: <1476836305-4468-1-git-send-email-baolu.lu@linux.intel.com>
Add support for early printk by writing debug messages to the
USB3 debug port. Users can use this type of early printk by
specifying kernel parameter of "earlyprintk=xdbc". This gives
users a chance of providing debug output.
The hardware for USB3 debug port requires DMA memory blocks.
This requires to delay setting up debugging hardware and
registering boot console until the memblocks are filled.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: x86@kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
---
Documentation/kernel-parameters.txt | 1 +
arch/x86/kernel/early_printk.c | 5 +++++
arch/x86/kernel/setup.c | 7 +++++++
3 files changed, 13 insertions(+)
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 37babf9..99b64b3 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1178,6 +1178,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
earlyprintk=ttySn[,baudrate]
earlyprintk=dbgp[debugController#]
earlyprintk=pciserial,bus:device.function[,baudrate]
+ earlyprintk=xdbc[xhciController#]
earlyprintk is useful when the kernel crashes before
the normal console is initialized. It is not enabled by
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 8a12199..c4031b9 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -17,6 +17,7 @@
#include <asm/intel-mid.h>
#include <asm/pgtable.h>
#include <linux/usb/ehci_def.h>
+#include <linux/usb/xhci-dbgp.h>
#include <linux/efi.h>
#include <asm/efi.h>
#include <asm/pci_x86.h>
@@ -381,6 +382,10 @@ static int __init setup_early_printk(char *buf)
if (!strncmp(buf, "efi", 3))
early_console_register(&early_efi_console, keep);
#endif
+#ifdef CONFIG_EARLY_PRINTK_XDBC
+ if (!strncmp(buf, "xdbc", 4))
+ early_xdbc_parse_parameter(buf + 4);
+#endif
buf++;
}
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index bbfbca5..3ceacc8 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -70,6 +70,8 @@
#include <linux/tboot.h>
#include <linux/jiffies.h>
+#include <linux/usb/xhci-dbgp.h>
+
#include <video/edid.h>
#include <asm/mtrr.h>
@@ -1096,6 +1098,11 @@ void __init setup_arch(char **cmdline_p)
memblock_set_current_limit(ISA_END_ADDRESS);
memblock_x86_fill();
+#ifdef CONFIG_EARLY_PRINTK_XDBC
+ if (!early_xdbc_setup_hardware())
+ early_xdbc_register_console();
+#endif
+
reserve_bios_regions();
if (efi_enabled(EFI_MEMMAP)) {
--
2.1.4
next prev parent reply other threads:[~2016-10-19 0:19 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-19 0:18 [RESEND PATCH v2 0/4] usb: early: add support for early printk through USB3 debug port Lu Baolu
2016-10-19 0:18 ` [RESEND PATCH v2 1/4] usb: dbc: early driver for xhci debug capability Lu Baolu
2016-10-19 13:09 ` Peter Zijlstra
2016-10-20 8:08 ` Lu Baolu
2016-10-20 8:41 ` Peter Zijlstra
2016-10-20 9:08 ` Peter Zijlstra
2016-10-21 0:35 ` Lu Baolu
2016-10-19 0:18 ` Lu Baolu [this message]
2016-10-19 0:18 ` [RESEND PATCH v2 3/4] usb: serial: usb_debug: add support for dbc debug device Lu Baolu
2016-10-19 0:18 ` [RESEND PATCH v2 4/4] usb: doc: add document for USB3 debug port usage Lu Baolu
2016-10-19 7:48 ` Jani Nikula
2016-10-20 5:45 ` Lu Baolu
2016-10-20 8:30 ` Jani Nikula
2016-10-21 0:39 ` Lu Baolu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1476836305-4468-3-git-send-email-baolu.lu@linux.intel.com \
--to=baolu.lu@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@linux.intel.com \
--cc=mingo@redhat.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.