From: "Anders K. Pedersen | Cohaesio" <akp@cohaesio.com>
To: "netfilter-devel@vger.kernel.org"
<netfilter-devel@vger.kernel.org>,
"pablo@netfilter.org" <pablo@netfilter.org>
Subject: [PATCH v2 nf-next 4/5] netfilter: nft: rt nexthop for IPv6 family
Date: Wed, 19 Oct 2016 18:40:49 +0000 [thread overview]
Message-ID: <1476902449.1161.23.camel@cohaesio.com> (raw)
In-Reply-To: <1476902043.1161.14.camel@cohaesio.com>
From: Anders K. Pedersen <akp@cohaesio.com>
Add nftables IPv6 family support for an "rt ip6 nexthop" expression
allowing usage of the routing nexthop (i.e. the directly connected IP
address that an outgoing packet is sent to) for matching or accounting, eg.
# nft add rule ip6 filter postrouting \
ip6 daddr fd01::/16 rt ip6 nexthop != fd00::1 drop
This will drop any traffic to fd01::/16 that is not routed via fd00::1.
# nft add rule ip6 filter postrouting \
flow table acct { rt ip6 nexthop timeout 600s counter }
This rule counts outgoing traffic per nexthop. Note that the timeout
releases an entry if no traffic is seen for this nexthop within 10 minutes.
Signed-off-by: Anders K. Pedersen <akp@cohaesio.com>
---
v2
- remove nft_rt_ipv6_select_ops
net/ipv6/netfilter/Kconfig | 4 +
net/ipv6/netfilter/Makefile | 1 +
net/ipv6/netfilter/nft_rt_ipv6.c | 110 ++++++++++++++++++++++++
3 files changed, 115 insertions(+)
diff --git a/net/ipv6/netfilter/Kconfig b/net/ipv6/netfilter/Kconfig
index e10a04c..8d3527e 100644
--- a/net/ipv6/netfilter/Kconfig
+++ b/net/ipv6/netfilter/Kconfig
@@ -42,6 +42,10 @@ config NFT_CHAIN_ROUTE_IPV6
fields such as the source, destination, flowlabel, hop-limit and
the packet mark.
+config NFT_RT_IPV6
+ default NFT_RT
+ tristate
+
config NFT_REJECT_IPV6
select NF_REJECT_IPV6
default NFT_REJECT
diff --git a/net/ipv6/netfilter/Makefile b/net/ipv6/netfilter/Makefile
index b4f7d0b..6958c35 100644
--- a/net/ipv6/netfilter/Makefile
+++ b/net/ipv6/netfilter/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_NF_DUP_IPV6) += nf_dup_ipv6.o
obj-$(CONFIG_NF_TABLES_IPV6) += nf_tables_ipv6.o
obj-$(CONFIG_NFT_CHAIN_ROUTE_IPV6) += nft_chain_route_ipv6.o
obj-$(CONFIG_NFT_CHAIN_NAT_IPV6) += nft_chain_nat_ipv6.o
+obj-$(CONFIG_NFT_RT_IPV6) += nft_rt_ipv6.o
obj-$(CONFIG_NFT_REJECT_IPV6) += nft_reject_ipv6.o
obj-$(CONFIG_NFT_MASQ_IPV6) += nft_masq_ipv6.o
obj-$(CONFIG_NFT_REDIR_IPV6) += nft_redir_ipv6.o
diff --git a/net/ipv6/netfilter/nft_rt_ipv6.c b/net/ipv6/netfilter/nft_rt_ipv6.c
new file mode 100644
index 0000000..32d8ec8
--- /dev/null
+++ b/net/ipv6/netfilter/nft_rt_ipv6.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright (c) 2016 Anders K. Pedersen <akp@cohaesio.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/netlink.h>
+#include <linux/netfilter.h>
+#include <linux/netfilter/nf_tables.h>
+#include <net/ip6_route.h>
+#include <net/netfilter/nf_tables.h>
+#include <net/netfilter/nft_rt.h>
+
+static void nft_rt_ipv6_get_eval(const struct nft_expr *expr,
+ struct nft_regs *regs,
+ const struct nft_pktinfo *pkt)
+{
+ const struct nft_rt *priv = nft_expr_priv(expr);
+ const struct sk_buff *skb = pkt->skb;
+ u32 *dest = ®s->data[priv->dreg];
+
+ switch (priv->key) {
+ case NFT_RT_NEXTHOP: {
+ struct rt6_info *rt = (struct rt6_info *)skb_dst(skb);
+
+ if (!rt)
+ goto err;
+ memcpy(dest, rt6_nexthop(rt, &ipv6_hdr(skb)->daddr),
+ sizeof(struct in6_addr));
+ break;
+ }
+ default:
+ return nft_rt_get_eval(expr, regs, pkt);
+ }
+
+ return;
+err:
+ regs->verdict.code = NFT_BREAK;
+}
+
+static int nft_rt_ipv6_get_init(const struct nft_ctx *ctx,
+ const struct nft_expr *expr,
+ const struct nlattr * const tb[])
+{
+ struct nft_rt *priv = nft_expr_priv(expr);
+ unsigned int len;
+
+ if (tb[NFTA_RT_KEY] == NULL ||
+ tb[NFTA_RT_DREG] == NULL ||
+ tb[NFTA_RT_FAMILY] == NULL)
+ return -EINVAL;
+
+ priv->key = ntohl(nla_get_be32(tb[NFTA_RT_KEY]));
+ switch (priv->key) {
+ case NFT_RT_NEXTHOP:
+ len = sizeof(struct in6_addr);
+ break;
+ default:
+ return nft_rt_get_init(ctx, expr, tb);
+ }
+
+ priv->family = ntohl(nla_get_be32(tb[NFTA_RT_FAMILY]));
+ if (priv->family != NFPROTO_IPV6)
+ return -EINVAL;
+
+ priv->dreg = nft_parse_register(tb[NFTA_RT_DREG]);
+ return nft_validate_register_store(ctx, priv->dreg, NULL,
+ NFT_DATA_VALUE, len);
+}
+
+static struct nft_expr_type nft_rt_ipv6_type;
+static const struct nft_expr_ops nft_rt_ipv6_get_ops = {
+ .type = &nft_rt_ipv6_type,
+ .size = NFT_EXPR_SIZE(sizeof(struct nft_rt)),
+ .eval = nft_rt_ipv6_get_eval,
+ .init = nft_rt_ipv6_get_init,
+ .dump = nft_rt_get_dump,
+};
+
+static struct nft_expr_type nft_rt_ipv6_type __read_mostly = {
+ .family = NFPROTO_IPV6,
+ .name = "rt",
+ .ops = &nft_rt_ipv6_get_ops,
+ .policy = nft_rt_policy,
+ .maxattr = NFTA_RT_MAX,
+ .owner = THIS_MODULE,
+};
+
+static int __init nft_rt_ipv6_module_init(void)
+{
+ return nft_register_expr(&nft_rt_ipv6_type);
+}
+
+static void __exit nft_rt_ipv6_module_exit(void)
+{
+ nft_unregister_expr(&nft_rt_ipv6_type);
+}
+
+module_init(nft_rt_ipv6_module_init);
+module_exit(nft_rt_ipv6_module_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Anders K. Pedersen <akp@cohaesio.com>");
+MODULE_ALIAS_NFT_AF_EXPR(AF_INET6, "rt");
next prev parent reply other threads:[~2016-10-19 18:40 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-19 18:34 [PATCH v2 nf-next 0/5] netfilter: nft: introduce routing expression Anders K. Pedersen | Cohaesio
2016-10-19 18:35 ` [PATCH v2 nf-next 1/5] netfilter: nft: UAPI headers for " Anders K. Pedersen | Cohaesio
2016-10-19 18:38 ` [PATCH v2 nf-next 2/5] netfilter: nft: basic " Anders K. Pedersen | Cohaesio
2016-10-19 18:39 ` [PATCH v2 nf-next 3/5] netfilter: nft: rt nexthop for IPv4 family Anders K. Pedersen | Cohaesio
2016-10-19 18:40 ` Anders K. Pedersen | Cohaesio [this message]
2016-10-19 18:41 ` [PATCH v2 nf-next 5/5] netfilter: nft: rt nexthop for inet family Anders K. Pedersen | Cohaesio
2016-10-20 9:13 ` Liping Zhang
2016-10-20 12:36 ` Anders K. Pedersen | Cohaesio
2016-10-20 13:27 ` Liping Zhang
2016-10-20 13:52 ` Anders K. Pedersen | Cohaesio
2016-10-21 2:06 ` Liping Zhang
2016-10-21 4:16 ` Anders K. Pedersen | Cohaesio
2016-10-21 6:17 ` Liping Zhang
2016-10-21 8:26 ` Anders K. Pedersen | Cohaesio
2016-10-21 12:42 ` Liping Zhang
2016-10-22 15:25 ` Anders K. Pedersen | Cohaesio
2016-10-21 9:21 ` Pablo Neira Ayuso
2016-10-21 13:22 ` Liping Zhang
2016-10-21 16:58 ` Pablo Neira Ayuso
2016-10-22 1:44 ` Liping Zhang
2016-10-22 16:08 ` Anders K. Pedersen | Cohaesio
2016-10-23 5:01 ` Liping Zhang
2016-10-27 17:50 ` Pablo Neira Ayuso
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1476902449.1161.23.camel@cohaesio.com \
--to=akp@cohaesio.com \
--cc=netfilter-devel@vger.kernel.org \
--cc=pablo@netfilter.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.