From: Jagan Teki <jteki@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v8 22/23] imx6: icorem6: Enable MTD device support
Date: Mon, 24 Oct 2016 17:27:41 +0530 [thread overview]
Message-ID: <1477310262-17841-23-git-send-email-jteki@openedev.com> (raw)
In-Reply-To: <1477310262-17841-1-git-send-email-jteki@openedev.com>
From: Jagan Teki <jagan@amarulasolutions.com>
Enable MTD device, partition and command support.
Cc: Stefano Babic <sbabic@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
include/configs/imx6qdl_icore.h | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/include/configs/imx6qdl_icore.h b/include/configs/imx6qdl_icore.h
index cd3aa43..6e33ec3 100644
--- a/include/configs/imx6qdl_icore.h
+++ b/include/configs/imx6qdl_icore.h
@@ -124,6 +124,12 @@
# define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
# define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
+/* MTD device */
+# define CONFIG_MTD_DEVICE
+# define CONFIG_CMD_MTDPARTS
+# define CONFIG_MTD_PARTITIONS
+# define MTDIDS_DEFAULT "nand0=nand"
+
# define CONFIG_APBH_DMA
# define CONFIG_APBH_DMA_BURST
# define CONFIG_APBH_DMA_BURST8
--
2.7.4
next prev parent reply other threads:[~2016-10-24 11:57 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-24 11:57 [U-Boot] [PATCH v8 00/23] imx6: Add Engicam i.CoreM6 QDL support Jagan Teki
2016-10-24 11:57 ` [U-Boot] [PATCH v8 01/23] serial: Kconfig: Add MXC_UART entry Jagan Teki
2016-10-26 17:14 ` Markus Niebel
2016-10-26 17:44 ` Jagan Teki
2016-10-24 11:57 ` [U-Boot] [PATCH v8 02/23] thermal: Kconfig: Add IMX_THERMAL entry Jagan Teki
2016-10-24 11:57 ` [U-Boot] [PATCH v8 03/23] config: Move CONFIG_DEFAULT_FDT_FILE to defconfigs Jagan Teki
2016-10-24 11:57 ` [U-Boot] [PATCH v8 04/23] arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial support Jagan Teki
2016-10-24 11:57 ` [U-Boot] [PATCH v8 05/23] net: Kconfig: Add FEC_MXC entry Jagan Teki
2016-10-26 17:16 ` Markus Niebel
2016-10-26 18:04 ` Jagan Teki
2016-10-24 11:57 ` [U-Boot] [PATCH v8 06/23] imx6: icorem6: Add ENET support Jagan Teki
2016-10-24 11:57 ` [U-Boot] [PATCH v8 07/23] imx: s/docs\/README.imximage/doc\/README.imximage/g Jagan Teki
2016-10-24 11:57 ` [U-Boot] [PATCH v8 08/23] arm: dts: Add devicetree for i.MX6DL Jagan Teki
2016-10-24 11:57 ` [U-Boot] [PATCH v8 09/23] arm: dts: Add devicetree for i.MX6DQL Jagan Teki
2016-10-24 11:57 ` [U-Boot] [PATCH v8 10/23] arm: dts: imx6dl: Add pinctrl defines Jagan Teki
2016-10-24 11:57 ` [U-Boot] [PATCH v8 11/23] dt-bindings: clock: imx6qdl: Add clock defines Jagan Teki
2016-10-24 11:57 ` [U-Boot] [PATCH v8 12/23] arm: imx6q: Add devicetree support for Engicam i.CoreM6 DualLite/Solo Jagan Teki
2016-10-24 11:57 ` [U-Boot] [PATCH v8 13/23] imx6q: icorem6: Enable pinctrl driver Jagan Teki
2016-10-24 11:57 ` [U-Boot] [PATCH v8 14/23] configs: imx6qdl: Enable CONFIG_BLK if DM_MMC Jagan Teki
2016-10-24 11:57 ` [U-Boot] [PATCH v8 15/23] configs: imx6qdl: Enable CONFIG_DM_MMC_OPS " Jagan Teki
2016-10-24 11:57 ` [U-Boot] [PATCH v8 16/23] engicam: icorem6: Add DM_GPIO, DM_MMC support Jagan Teki
2016-10-24 11:57 ` [U-Boot] [PATCH v8 17/23] arm: dts: Add devicetree for i.MX6Q Jagan Teki
2016-10-24 11:57 ` [U-Boot] [PATCH v8 18/23] arm: dts: imx6q: Add pinctrl defines Jagan Teki
2016-10-24 11:57 ` [U-Boot] [PATCH v8 19/23] arm: imx6q: Add devicetree support for Engicam i.CoreM6 Quad/Dual Jagan Teki
2016-10-24 11:57 ` [U-Boot] [PATCH v8 20/23] mtd: nand: Kconfig: Add NAND_MXS entry Jagan Teki
2016-10-24 11:57 ` [U-Boot] [PATCH v8 21/23] imx6: icorem6: Add NAND support Jagan Teki
2016-10-24 11:57 ` Jagan Teki [this message]
2016-10-24 11:57 ` [U-Boot] [PATCH v8 23/23] imx6: icorem6: Add default mtd nand partition table Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1477310262-17841-23-git-send-email-jteki@openedev.com \
--to=jteki@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.