From: <gregkh@linuxfoundation.org>
To: marcos.souza.org@gmail.com, dmitry.torokhov@gmail.com,
gregkh@linuxfoundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "Input: i8042 - skip selftest on ASUS laptops" has been added to the 4.8-stable tree
Date: Wed, 26 Oct 2016 10:16:16 +0200 [thread overview]
Message-ID: <1477469776229198@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
Input: i8042 - skip selftest on ASUS laptops
to the 4.8-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
input-i8042-skip-selftest-on-asus-laptops.patch
and it can be found in the queue-4.8 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 930e19248e9b61da36c967687ca79c4d5f977919 Mon Sep 17 00:00:00 2001
From: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Date: Sat, 1 Oct 2016 12:07:35 -0700
Subject: Input: i8042 - skip selftest on ASUS laptops
From: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
commit 930e19248e9b61da36c967687ca79c4d5f977919 upstream.
On suspend/resume cycle, selftest is executed to reset i8042 controller.
But when this is done in Asus devices, subsequent calls to detect/init
functions to elantech driver fails. Skipping selftest fixes this problem.
An easier step to reproduce this problem is adding i8042.reset=1 as a
kernel parameter. On Asus laptops, it'll make the system to start with the
touchpad already stuck, since psmouse_probe forcibly calls the selftest
function.
This patch was inspired by John Hiesey's change[1], but, since this problem
affects a lot of models of Asus, let's avoid running selftests on them.
All models affected by this problem:
A455LD
K401LB
K501LB
K501LX
R409L
V502LX
X302LA
X450LCP
X450LD
X455LAB
X455LDB
X455LF
Z450LA
[1]: https://marc.info/?l=linux-input&m=144312209020616&w=2
Fixes: "ETPS/2 Elantech Touchpad dies after resume from suspend"
(https://bugzilla.kernel.org/show_bug.cgi?id=107971)
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/kernel-parameters.txt | 9 ++-
drivers/input/serio/i8042-io.h | 2
drivers/input/serio/i8042-ip22io.h | 2
drivers/input/serio/i8042-ppcio.h | 2
drivers/input/serio/i8042-sparcio.h | 2
drivers/input/serio/i8042-unicore32io.h | 2
drivers/input/serio/i8042-x86ia64io.h | 96 +++++++++++++++++++++++++++++++-
drivers/input/serio/i8042.c | 55 ++++++++++++++----
8 files changed, 150 insertions(+), 20 deletions(-)
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1457,7 +1457,14 @@ bytes respectively. Such letter suffixes
i8042.nopnp [HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
controllers
i8042.notimeout [HW] Ignore timeout condition signalled by controller
- i8042.reset [HW] Reset the controller during init and cleanup
+ i8042.reset [HW] Reset the controller during init, cleanup and
+ suspend-to-ram transitions, only during s2r
+ transitions, or never reset
+ Format: { 1 | Y | y | 0 | N | n }
+ 1, Y, y: always reset controller
+ 0, N, n: don't ever reset controller
+ Default: only on s2r transitions on x86; most other
+ architectures force reset to be always executed
i8042.unlock [HW] Unlock (ignore) the keylock
i8042.kbdreset [HW] Reset device connected to KBD port
--- a/drivers/input/serio/i8042-io.h
+++ b/drivers/input/serio/i8042-io.h
@@ -81,7 +81,7 @@ static inline int i8042_platform_init(vo
return -EBUSY;
#endif
- i8042_reset = 1;
+ i8042_reset = I8042_RESET_ALWAYS;
return 0;
}
--- a/drivers/input/serio/i8042-ip22io.h
+++ b/drivers/input/serio/i8042-ip22io.h
@@ -61,7 +61,7 @@ static inline int i8042_platform_init(vo
return -EBUSY;
#endif
- i8042_reset = 1;
+ i8042_reset = I8042_RESET_ALWAYS;
return 0;
}
--- a/drivers/input/serio/i8042-ppcio.h
+++ b/drivers/input/serio/i8042-ppcio.h
@@ -44,7 +44,7 @@ static inline void i8042_write_command(i
static inline int i8042_platform_init(void)
{
- i8042_reset = 1;
+ i8042_reset = I8042_RESET_ALWAYS;
return 0;
}
--- a/drivers/input/serio/i8042-sparcio.h
+++ b/drivers/input/serio/i8042-sparcio.h
@@ -130,7 +130,7 @@ static int __init i8042_platform_init(vo
}
}
- i8042_reset = 1;
+ i8042_reset = I8042_RESET_ALWAYS;
return 0;
}
--- a/drivers/input/serio/i8042-unicore32io.h
+++ b/drivers/input/serio/i8042-unicore32io.h
@@ -61,7 +61,7 @@ static inline int i8042_platform_init(vo
if (!request_mem_region(I8042_REGION_START, I8042_REGION_SIZE, "i8042"))
return -EBUSY;
- i8042_reset = 1;
+ i8042_reset = I8042_RESET_ALWAYS;
return 0;
}
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -510,6 +510,90 @@ static const struct dmi_system_id __init
{ }
};
+/*
+ * On some Asus laptops, just running self tests cause problems.
+ */
+static const struct dmi_system_id i8042_dmi_noselftest_table[] = {
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "A455LD"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "K401LB"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "K501LB"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "K501LX"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "R409L"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "V502LX"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X302LA"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X450LCP"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X450LD"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X455LAB"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X455LDB"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X455LF"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Z450LA"),
+ },
+ },
+ { }
+};
static const struct dmi_system_id __initconst i8042_dmi_reset_table[] = {
{
/* MSI Wind U-100 */
@@ -1072,12 +1156,18 @@ static int __init i8042_platform_init(vo
return retval;
#if defined(__ia64__)
- i8042_reset = true;
+ i8042_reset = I8042_RESET_ALWAYS;
#endif
#ifdef CONFIG_X86
- if (dmi_check_system(i8042_dmi_reset_table))
- i8042_reset = true;
+ /* Honor module parameter when value is not default */
+ if (i8042_reset == I8042_RESET_DEFAULT) {
+ if (dmi_check_system(i8042_dmi_reset_table))
+ i8042_reset = I8042_RESET_ALWAYS;
+
+ if (dmi_check_system(i8042_dmi_noselftest_table))
+ i8042_reset = I8042_RESET_NEVER;
+ }
if (dmi_check_system(i8042_dmi_noloop_table))
i8042_noloop = true;
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -48,9 +48,39 @@ static bool i8042_unlock;
module_param_named(unlock, i8042_unlock, bool, 0);
MODULE_PARM_DESC(unlock, "Ignore keyboard lock.");
-static bool i8042_reset;
-module_param_named(reset, i8042_reset, bool, 0);
-MODULE_PARM_DESC(reset, "Reset controller during init and cleanup.");
+enum i8042_controller_reset_mode {
+ I8042_RESET_NEVER,
+ I8042_RESET_ALWAYS,
+ I8042_RESET_ON_S2RAM,
+#define I8042_RESET_DEFAULT I8042_RESET_ON_S2RAM
+};
+static enum i8042_controller_reset_mode i8042_reset = I8042_RESET_DEFAULT;
+static int i8042_set_reset(const char *val, const struct kernel_param *kp)
+{
+ enum i8042_controller_reset_mode *arg = kp->arg;
+ int error;
+ bool reset;
+
+ if (val) {
+ error = kstrtobool(val, &reset);
+ if (error)
+ return error;
+ } else {
+ reset = true;
+ }
+
+ *arg = reset ? I8042_RESET_ALWAYS : I8042_RESET_NEVER;
+ return 0;
+}
+
+static const struct kernel_param_ops param_ops_reset_param = {
+ .flags = KERNEL_PARAM_OPS_FL_NOARG,
+ .set = i8042_set_reset,
+};
+#define param_check_reset_param(name, p) \
+ __param_check(name, p, enum i8042_controller_reset_mode)
+module_param_named(reset, i8042_reset, reset_param, 0);
+MODULE_PARM_DESC(reset, "Reset controller on resume, cleanup or both");
static bool i8042_direct;
module_param_named(direct, i8042_direct, bool, 0);
@@ -1019,7 +1049,7 @@ static int i8042_controller_init(void)
* Reset the controller and reset CRT to the original value set by BIOS.
*/
-static void i8042_controller_reset(bool force_reset)
+static void i8042_controller_reset(bool s2r_wants_reset)
{
i8042_flush();
@@ -1044,8 +1074,10 @@ static void i8042_controller_reset(bool
* Reset the controller if requested.
*/
- if (i8042_reset || force_reset)
+ if (i8042_reset == I8042_RESET_ALWAYS ||
+ (i8042_reset == I8042_RESET_ON_S2RAM && s2r_wants_reset)) {
i8042_controller_selftest();
+ }
/*
* Restore the original control register setting.
@@ -1110,7 +1142,7 @@ static void i8042_dritek_enable(void)
* before suspending.
*/
-static int i8042_controller_resume(bool force_reset)
+static int i8042_controller_resume(bool s2r_wants_reset)
{
int error;
@@ -1118,7 +1150,8 @@ static int i8042_controller_resume(bool
if (error)
return error;
- if (i8042_reset || force_reset) {
+ if (i8042_reset == I8042_RESET_ALWAYS ||
+ (i8042_reset == I8042_RESET_ON_S2RAM && s2r_wants_reset)) {
error = i8042_controller_selftest();
if (error)
return error;
@@ -1195,7 +1228,7 @@ static int i8042_pm_resume_noirq(struct
static int i8042_pm_resume(struct device *dev)
{
- bool force_reset;
+ bool want_reset;
int i;
for (i = 0; i < I8042_NUM_PORTS; i++) {
@@ -1218,9 +1251,9 @@ static int i8042_pm_resume(struct device
* off control to the platform firmware, otherwise we can simply restore
* the mode.
*/
- force_reset = pm_resume_via_firmware();
+ want_reset = pm_resume_via_firmware();
- return i8042_controller_resume(force_reset);
+ return i8042_controller_resume(want_reset);
}
static int i8042_pm_thaw(struct device *dev)
@@ -1482,7 +1515,7 @@ static int __init i8042_probe(struct pla
i8042_platform_device = dev;
- if (i8042_reset) {
+ if (i8042_reset == I8042_RESET_ALWAYS) {
error = i8042_controller_selftest();
if (error)
return error;
Patches currently in stable-queue which might be from marcos.souza.org@gmail.com are
queue-4.8/input-i8042-skip-selftest-on-asus-laptops.patch
reply other threads:[~2016-10-26 8:17 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1477469776229198@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=dmitry.torokhov@gmail.com \
--cc=marcos.souza.org@gmail.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.