[PATCH linux v6 09/18] fsi: Add crc4 helpers

[christopher.lee.bostic@gmail.com]

From: Jeremy Kerr <jk@ozlabs.org>

Add some helpers for the crc checks for the slave configuration table.
This works 4-bits-at-a-time, using a simple table approach.

We will need this in the FSI core code, as well as any master
implementations that need to calculate CRCs in software.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---
 drivers/fsi/fsi-core.c   | 25 +++++++++++++++++++++++++
 drivers/fsi/fsi-master.h | 21 +++++++++++++++++++++
 2 files changed, 46 insertions(+)

diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index 9744a55..2d22320 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -34,6 +34,31 @@ struct fsi_slave {
 
 #define to_fsi_slave(d) container_of(d, struct fsi_slave, dev)
 
+/* crc helpers */
+static const uint8_t crc4_tab[] = {
+	0x0, 0x7, 0xe, 0x9, 0xb, 0xc, 0x5, 0x2,
+	0x1, 0x6, 0xf, 0x8, 0xa, 0xd, 0x4, 0x3,
+};
+
+uint8_t fsi_crc4(uint8_t c, uint64_t x, int bits)
+{
+	int i;
+
+	/* Align to 4-bits */
+	bits = (bits + 3) & ~0x3;
+
+	/* Calculate crc4 over four-bit nibbles, starting at the MSbit */
+	for (i = bits; i >= 0; i -= 4)
+		c = crc4_tab[c ^ ((x >> i) & 0xf)];
+
+	return c;
+}
+
+static bool check_crc4_u32(uint32_t x)
+{
+	return fsi_crc4(0, x, 32) == 0;
+}
+
 /* FSI slave support */
 static int fsi_slave_init(struct fsi_master *master,
 		int link, uint8_t slave_id)
diff --git a/drivers/fsi/fsi-master.h b/drivers/fsi/fsi-master.h
index e75a810..cafb433 100644
--- a/drivers/fsi/fsi-master.h
+++ b/drivers/fsi/fsi-master.h
@@ -34,4 +34,25 @@ struct fsi_master {
 extern int fsi_master_register(struct fsi_master *master);
 extern void fsi_master_unregister(struct fsi_master *master);
 
+/**
+ * crc4 helper: Given a starting crc4 state @c, calculate the crc4 vaue of @x,
+ * which is @bits in length. This may be required by master implementations
+ * that do not provide their own hardware checksums.
+ *
+ * The crc4 is performed on 4-bit chunks (which is all we need for FSI
+ * calculations). Typically, we'll want a starting state of 0:
+ *
+ *  c = fsi_crc4(0, msg, len);
+ *
+ * To crc4 a message that includes a single start bit, initialise crc4 state
+ * with:
+ *
+ *  c = fsi_crc4(0, 1, 1);
+ *
+ * Then update with message data:
+ *
+ *  c = fsi_crc4(c, msg, len);
+ */
+uint8_t fsi_crc4(uint8_t c, uint64_t x, int bits);
+
 #endif /* DRIVERS_FSI_MASTER_H */
-- 
1.8.2.2