From: Eric Nelson <eric@nelint.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RFC PATCH 7/9] mx6memcal: add configuration for Wandboard Quad
Date: Tue, 1 Nov 2016 13:13:48 -0700 [thread overview]
Message-ID: <1478031230-7263-8-git-send-email-eric@nelint.com> (raw)
In-Reply-To: <1478031230-7263-1-git-send-email-eric@nelint.com>
Note that for some reason, this is failing for me unless I
select a DDR bus width of 32 bits.
Signed-off-by: Eric Nelson <eric@nelint.com>
---
configs/mx6memcal_wandboard_quad_defconfig | 34 ++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 configs/mx6memcal_wandboard_quad_defconfig
diff --git a/configs/mx6memcal_wandboard_quad_defconfig b/configs/mx6memcal_wandboard_quad_defconfig
new file mode 100644
index 0000000..291c273
--- /dev/null
+++ b/configs/mx6memcal_wandboard_quad_defconfig
@@ -0,0 +1,34 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_MX6_DDRCAL=y
+CONFIG_TARGET_MX6MEMCAL=y
+CONFIG_DDRCS=1
+CONFIG_H5TQ4G63AFR=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6QDL"
+CONFIG_SPL=y
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_BOOTM is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_SAVEENV is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MEMINFO=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_CMD_NET is not set
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_CACHE=y
+CONFIG_REGEX=y
--
2.7.4
next prev parent reply other threads:[~2016-11-01 20:13 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-30 17:18 [U-Boot] [PATCH 0/3] mx6: ddr: updates for dynamic DDR calibration Eric Nelson
2016-10-30 17:19 ` [U-Boot] [PATCH 1/3] mx6: ddr: allow 32 cycles for DQS gating calibration Eric Nelson
2016-10-30 17:27 ` Marek Vasut
2016-10-30 17:19 ` [U-Boot] [PATCH 2/3] mx6: ddr: pass mx6_ddr_sysinfo to calibration routines Eric Nelson
2016-10-30 17:29 ` Marek Vasut
2016-10-30 17:19 ` [U-Boot] [PATCH 3/3] mx6: ddr: add routine to return DDR calibration data Eric Nelson
2016-10-30 17:30 ` Marek Vasut
2016-10-30 19:14 ` Eric Nelson
2016-10-30 20:02 ` Marek Vasut
2016-10-30 19:20 ` [U-Boot] [PATCH] ARM: mx6: ddr: use Kconfig for inclusion of DDR calibration routines Eric Nelson
2016-10-30 20:03 ` Marek Vasut
2016-10-30 23:10 ` Eric Nelson
2016-10-30 23:33 ` [U-Boot] [PATCH V2 0/4] mx6: ddr: updates for dynamic DDR calibration Eric Nelson
2016-10-30 23:33 ` [U-Boot] [PATCH V2 1/4] mx6: ddr: allow 32 cycles for DQS gating calibration Eric Nelson
2016-10-30 23:33 ` [U-Boot] [PATCH V2 2/4] mx6: ddr: pass mx6_ddr_sysinfo to calibration routines Eric Nelson
2016-10-30 23:33 ` [U-Boot] [PATCH V2 3/4] mx6: ddr: add routine to return DDR calibration data Eric Nelson
2016-10-30 23:33 ` [U-Boot] [PATCH V2 4/4] ARM: mx6: ddr: use Kconfig for inclusion of DDR calibration routines Eric Nelson
2016-11-22 10:59 ` [U-Boot] [PATCH V2 0/4] mx6: ddr: updates for dynamic DDR calibration Christoph Fritz
2016-11-29 16:28 ` Stefano Babic
2016-11-01 20:13 ` [U-Boot] [RFC PATCH 0/9] ARM: imx: mx6: Add virtual mx6memcal board Eric Nelson
2016-11-01 20:13 ` [U-Boot] [RFC PATCH 1/9] mx6: Add board mx6memcal for use in validating DDR Eric Nelson
2017-07-14 14:18 ` Fabio Estevam
2017-07-14 17:58 ` Eric Nelson
2017-07-14 19:01 ` Fabio Estevam
2017-07-28 2:50 ` Eric Nelson
2016-11-01 20:13 ` [U-Boot] [RFC PATCH 2/9] mx6memcal: zero values for MPWRDLCTL cause read DQS calibration errors Eric Nelson
2016-11-01 20:13 ` [U-Boot] [RFC PATCH 3/9] mx6memcal: add configuration for SABRE Lite Eric Nelson
2016-11-01 20:13 ` [U-Boot] [RFC PATCH 4/9] mx6memcal: add configuration for Nitrogen6_max board Eric Nelson
2016-11-01 20:13 ` [U-Boot] [RFC PATCH 5/9] mx6memcal: add configuration for tr1x board (i.MX6SL with DDR3) Eric Nelson
2016-11-01 20:13 ` [U-Boot] [RFC PATCH 6/9] mx6memcal: add configuration for Wandboard Solo (512MiB of x32 DDR3) Eric Nelson
2016-11-01 20:13 ` Eric Nelson [this message]
2016-11-01 20:13 ` [U-Boot] [RFC PATCH 8/9] mx6memcal: add configuration for mx6slevk Eric Nelson
2016-11-01 20:13 ` [U-Boot] [RFC PATCH 9/9] mx6memcal: add configuration for warp board (i.MX6SL) Eric Nelson
2016-11-02 2:06 ` [U-Boot] [RFC PATCH 0/3] ARM: imx: mx6: Add plugin support for SPL Eric Nelson
2016-11-02 2:06 ` [U-Boot] [RFC PATCH 1/3] ARM: mx6: preserve Boot ROM stack in SPL Eric Nelson
2016-11-02 2:06 ` [U-Boot] [RFC PATCH 2/3] ARM: mx6: ddr: add plugin-utils placeholder Eric Nelson
2016-11-02 2:06 ` [U-Boot] [RFC PATCH 3/3] ARM: imx: mx6memcal: allow build of combined SPL+U-Boot Eric Nelson
2017-01-18 1:27 ` [U-Boot] [RFC PATCH 0/3] ARM: imx: mx6: Add plugin support for SPL Tim Harvey
2017-01-18 17:05 ` Eric Nelson
2017-01-18 18:49 ` Tim Harvey
2017-01-18 19:01 ` Fabio Estevam
2017-01-20 17:40 ` Tim Harvey
2017-01-27 14:56 ` Fabio Estevam
2017-01-27 15:25 ` Otavio Salvador
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1478031230-7263-8-git-send-email-eric@nelint.com \
--to=eric@nelint.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.