From: Rob Clark <robdclark@gmail.com>
To: dri-devel@lists.freedesktop.org
Subject: [PATCH 4/7] drm/atomic: add new drm_debug bit to dump atomic state
Date: Sat, 5 Nov 2016 11:08:09 -0400 [thread overview]
Message-ID: <1478358492-30738-5-git-send-email-robdclark@gmail.com> (raw)
In-Reply-To: <1478358492-30738-1-git-send-email-robdclark@gmail.com>
The contents of drm_{plane,crtc,connector}_state is dumped before
commit. If a driver extends any of the state structs, it can implement
the corresponding funcs->atomic_print_state() to add it's own driver
specific state.
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
drivers/gpu/drm/drm_atomic.c | 93 ++++++++++++++++++++++++++++++++++++++++++++
include/drm/drmP.h | 1 +
include/drm/drm_connector.h | 13 +++++++
include/drm/drm_crtc.h | 13 +++++++
include/drm/drm_plane.h | 13 +++++++
5 files changed, 133 insertions(+)
diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index 2373960..446bdb2 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -30,6 +30,7 @@
#include <drm/drm_atomic.h>
#include <drm/drm_mode.h>
#include <drm/drm_plane_helper.h>
+#include <drm/drm_print.h>
#include "drm_crtc_internal.h"
@@ -606,6 +607,28 @@ static int drm_atomic_crtc_check(struct drm_crtc *crtc,
return 0;
}
+static void drm_atomic_crtc_print_state(struct drm_printer *p,
+ const struct drm_crtc_state *state)
+{
+ struct drm_crtc *crtc = state->crtc;
+
+ drm_printf(p, "crtc[%u]: %s\n", crtc->base.id, crtc->name);
+ drm_printf(p, "\tenable=%d\n", state->enable);
+ drm_printf(p, "\tactive=%d\n", state->active);
+ drm_printf(p, "\tplanes_changed=%d\n", state->planes_changed);
+ drm_printf(p, "\tmode_changed=%d\n", state->mode_changed);
+ drm_printf(p, "\tactive_changed=%d\n", state->active_changed);
+ drm_printf(p, "\tconnectors_changed=%d\n", state->connectors_changed);
+ drm_printf(p, "\tcolor_mgmt_changed=%d\n", state->color_mgmt_changed);
+ drm_printf(p, "\tplane_mask=%x\n", state->plane_mask);
+ drm_printf(p, "\tconnector_mask=%x\n", state->connector_mask);
+ drm_printf(p, "\tencoder_mask=%x\n", state->encoder_mask);
+ drm_printf(p, "\tmode: " DRM_MODE_FMT "\n", DRM_MODE_ARG(&state->mode));
+
+ if (crtc->funcs->atomic_print_state)
+ crtc->funcs->atomic_print_state(p, state);
+}
+
/**
* drm_atomic_get_plane_state - get plane state
* @state: global atomic state object
@@ -880,6 +903,38 @@ static int drm_atomic_plane_check(struct drm_plane *plane,
return 0;
}
+static void drm_atomic_plane_print_state(struct drm_printer *p,
+ const struct drm_plane_state *state)
+{
+ struct drm_plane *plane = state->plane;
+ struct drm_rect src = drm_plane_state_src(state);
+ struct drm_rect dest = drm_plane_state_dest(state);
+
+ drm_printf(p, "plane[%u]: %s\n", plane->base.id, plane->name);
+ drm_printf(p, "\tcrtc=%s\n", state->crtc ? state->crtc->name : "(null)");
+ drm_printf(p, "\tfb=%u\n", state->fb ? state->fb->base.id : 0);
+ if (state->fb) {
+ struct drm_framebuffer *fb = state->fb;
+ int i, n = drm_format_num_planes(fb->pixel_format);
+
+ drm_printf(p, "\t\tformat=%s\n",
+ drm_get_format_name(fb->pixel_format));
+ drm_printf(p, "\t\tsize=%dx%d\n", fb->width, fb->height);
+ drm_printf(p, "\t\tlayers:\n");
+ for (i = 0; i < n; i++) {
+ drm_printf(p, "\t\t\tpitch[%d]=%u\n", i, fb->pitches[i]);
+ drm_printf(p, "\t\t\toffset[%d]=%u\n", i, fb->offsets[i]);
+ drm_printf(p, "\t\t\tmodifier[%d]=0x%llx\n", i, fb->modifier[i]);
+ }
+ }
+ drm_printf(p, "\tcrtc-pos=" DRM_RECT_FMT "\n", DRM_RECT_ARG(&dest));
+ drm_printf(p, "\tsrc-pos=" DRM_RECT_FP_FMT "\n", DRM_RECT_FP_ARG(&src));
+ drm_printf(p, "\trotation=%x\n", state->rotation);
+
+ if (plane->funcs->atomic_print_state)
+ plane->funcs->atomic_print_state(p, state);
+}
+
/**
* drm_atomic_get_connector_state - get connector state
* @state: global atomic state object
@@ -995,6 +1050,18 @@ int drm_atomic_connector_set_property(struct drm_connector *connector,
}
EXPORT_SYMBOL(drm_atomic_connector_set_property);
+static void drm_atomic_connector_print_state(struct drm_printer *p,
+ const struct drm_connector_state *state)
+{
+ struct drm_connector *connector = state->connector;
+
+ drm_printf(p, "connector[%u]: %s\n", connector->base.id, connector->name);
+ drm_printf(p, "\tcrtc=%s\n", state->crtc ? state->crtc->name : "(null)");
+
+ if (connector->funcs->atomic_print_state)
+ connector->funcs->atomic_print_state(p, state);
+}
+
/**
* drm_atomic_connector_get_property - get property value from connector state
* @connector: the drm connector to set a property on
@@ -1459,6 +1526,29 @@ int drm_atomic_nonblocking_commit(struct drm_atomic_state *state)
}
EXPORT_SYMBOL(drm_atomic_nonblocking_commit);
+static void drm_atomic_print_state(const struct drm_atomic_state *state)
+{
+ struct drm_printer p = drm_info_printer(state->dev->dev);
+ struct drm_plane *plane;
+ struct drm_plane_state *plane_state;
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *crtc_state;
+ struct drm_connector *connector;
+ struct drm_connector_state *connector_state;
+ int i;
+
+ DRM_DEBUG_ATOMIC("checking %p\n", state);
+
+ for_each_plane_in_state(state, plane, plane_state, i)
+ drm_atomic_plane_print_state(&p, plane_state);
+
+ for_each_crtc_in_state(state, crtc, crtc_state, i)
+ drm_atomic_crtc_print_state(&p, crtc_state);
+
+ for_each_connector_in_state(state, connector, connector_state, i)
+ drm_atomic_connector_print_state(&p, connector_state);
+}
+
/*
* The big monstor ioctl
*/
@@ -1748,6 +1838,9 @@ int drm_mode_atomic_ioctl(struct drm_device *dev,
} else if (arg->flags & DRM_MODE_ATOMIC_NONBLOCK) {
ret = drm_atomic_nonblocking_commit(state);
} else {
+ if (unlikely(drm_debug & DRM_UT_STATE))
+ drm_atomic_print_state(state);
+
ret = drm_atomic_commit(state);
}
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index 7f3c68a..6f0a851 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -135,6 +135,7 @@ struct dma_buf_attachment;
#define DRM_UT_PRIME 0x08
#define DRM_UT_ATOMIC 0x10
#define DRM_UT_VBL 0x20
+#define DRM_UT_STATE 0x40
extern __printf(6, 7)
void drm_dev_printk(const struct device *dev, const char *level,
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index ac9d7d8..3e97272 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -37,6 +37,7 @@ struct drm_crtc;
struct drm_encoder;
struct drm_property;
struct drm_property_blob;
+struct drm_printer;
struct edid;
enum drm_connector_force {
@@ -481,6 +482,18 @@ struct drm_connector_funcs {
const struct drm_connector_state *state,
struct drm_property *property,
uint64_t *val);
+
+ /**
+ * @atomic_print_state:
+ *
+ * If driver subclasses struct &drm_connector_state, it should implement
+ * this optional hook for printing additional driver specific state.
+ *
+ * Do not call this directly, use drm_atomic_connector_print_state()
+ * instead.
+ */
+ void (*atomic_print_state)(struct drm_printer *p,
+ const struct drm_connector_state *state);
};
/* mode specified on the command line */
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 0aa2925..65cb232 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -52,6 +52,7 @@ struct drm_device;
struct drm_mode_set;
struct drm_file;
struct drm_clip_rect;
+struct drm_printer;
struct device_node;
struct fence;
struct edid;
@@ -564,6 +565,18 @@ struct drm_crtc_funcs {
* before data structures are torndown.
*/
void (*early_unregister)(struct drm_crtc *crtc);
+
+ /**
+ * @atomic_print_state:
+ *
+ * If driver subclasses struct &drm_crtc_state, it should implement
+ * this optional hook for printing additional driver specific state.
+ *
+ * Do not call this directly, use drm_atomic_crtc_print_state()
+ * instead.
+ */
+ void (*atomic_print_state)(struct drm_printer *p,
+ const struct drm_crtc_state *state);
};
/**
diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
index baba331..fa7f747 100644
--- a/include/drm/drm_plane.h
+++ b/include/drm/drm_plane.h
@@ -28,6 +28,7 @@
#include <drm/drm_mode_object.h>
struct drm_crtc;
+struct drm_printer;
/**
* struct drm_plane_state - mutable plane state
@@ -340,6 +341,18 @@ struct drm_plane_funcs {
* before data structures are torndown.
*/
void (*early_unregister)(struct drm_plane *plane);
+
+ /**
+ * @atomic_print_state:
+ *
+ * If driver subclasses struct &drm_plane_state, it should implement
+ * this optional hook for printing additional driver specific state.
+ *
+ * Do not call this directly, use drm_atomic_plane_print_state()
+ * instead.
+ */
+ void (*atomic_print_state)(struct drm_printer *p,
+ const struct drm_plane_state *state);
};
/**
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2016-11-05 15:08 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-05 15:08 [PATCH 0/7] drm: add atomic state logging and debugfs Rob Clark
2016-11-05 15:08 ` [PATCH 1/7] drm: helper macros to print composite types Rob Clark
2016-11-05 15:08 ` [PATCH 2/7] drm: add helper for printing to log or seq_file Rob Clark
2016-11-05 15:08 ` [PATCH 3/7] drm: add helpers to go from plane state to drm_rect Rob Clark
2016-11-05 15:08 ` Rob Clark [this message]
2016-11-05 15:08 ` [PATCH 5/7] drm/atomic: add debugfs file to dump out atomic state Rob Clark
2016-11-05 15:08 ` [PATCH 6/7] drm/msm/mdp5: add atomic_print_state support Rob Clark
2016-11-05 15:08 ` [PATCH 7/7] drm/msm: module param to dump state on error irq Rob Clark
2016-11-08 21:39 ` [PATCH 0/7] drm: add atomic state logging and debugfs Sean Paul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1478358492-30738-5-git-send-email-robdclark@gmail.com \
--to=robdclark@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.