From: <gregkh@linuxfoundation.org>
To: nbd@nbd.name, gregkh@linuxfoundation.org, kvalo@qca.qualcomm.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "Revert "ath9k_hw: implement temperature compensation support for AR9003+"" has been added to the 4.8-stable tree
Date: Wed, 09 Nov 2016 09:18:50 +0100 [thread overview]
Message-ID: <147867953018876@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
Revert "ath9k_hw: implement temperature compensation support for AR9003+"
to the 4.8-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
revert-ath9k_hw-implement-temperature-compensation-support-for-ar9003.patch
and it can be found in the queue-4.8 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 304e5ac118cc351eb047b6c433a89e13ea7259cf Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@nbd.name>
Date: Tue, 11 Oct 2016 19:46:49 +0200
Subject: Revert "ath9k_hw: implement temperature compensation support for AR9003+"
From: Felix Fietkau <nbd@nbd.name>
commit 304e5ac118cc351eb047b6c433a89e13ea7259cf upstream.
This reverts commit 171f6402e4aa ("ath9k_hw: implement temperature compensation
support for AR9003+"). Some users report that this commit causes a regression
in performance under some conditions.
Fixes: 171f6402e4aa ("ath9k_hw: implement temperature compensation support for AR9003+")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
[kvalo@qca.qualcomm.com: improve commit log]
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wireless/ath/ath9k/ar9003_calib.c | 25 +++----------------------
drivers/net/wireless/ath/ath9k/hw.h | 1 -
2 files changed, 3 insertions(+), 23 deletions(-)
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -33,7 +33,6 @@ struct coeff {
enum ar9003_cal_types {
IQ_MISMATCH_CAL = BIT(0),
- TEMP_COMP_CAL = BIT(1),
};
static void ar9003_hw_setup_calibration(struct ath_hw *ah,
@@ -59,12 +58,6 @@ static void ar9003_hw_setup_calibration(
/* Kick-off cal */
REG_SET_BIT(ah, AR_PHY_TIMING4, AR_PHY_TIMING4_DO_CAL);
break;
- case TEMP_COMP_CAL:
- ath_dbg(common, CALIBRATE,
- "starting Temperature Compensation Calibration\n");
- REG_SET_BIT(ah, AR_CH0_THERM, AR_CH0_THERM_LOCAL);
- REG_SET_BIT(ah, AR_CH0_THERM, AR_CH0_THERM_START);
- break;
default:
ath_err(common, "Invalid calibration type\n");
break;
@@ -93,8 +86,7 @@ static bool ar9003_hw_per_calibration(st
/*
* Accumulate cal measures for active chains
*/
- if (cur_caldata->calCollect)
- cur_caldata->calCollect(ah);
+ cur_caldata->calCollect(ah);
ah->cal_samples++;
if (ah->cal_samples >= cur_caldata->calNumSamples) {
@@ -107,8 +99,7 @@ static bool ar9003_hw_per_calibration(st
/*
* Process accumulated data
*/
- if (cur_caldata->calPostProc)
- cur_caldata->calPostProc(ah, numChains);
+ cur_caldata->calPostProc(ah, numChains);
/* Calibration has finished. */
caldata->CalValid |= cur_caldata->calType;
@@ -323,16 +314,9 @@ static const struct ath9k_percal_data iq
ar9003_hw_iqcalibrate
};
-static const struct ath9k_percal_data temp_cal_single_sample = {
- TEMP_COMP_CAL,
- MIN_CAL_SAMPLES,
- PER_MAX_LOG_COUNT,
-};
-
static void ar9003_hw_init_cal_settings(struct ath_hw *ah)
{
ah->iq_caldata.calData = &iq_cal_single_sample;
- ah->temp_caldata.calData = &temp_cal_single_sample;
if (AR_SREV_9300_20_OR_LATER(ah)) {
ah->enabled_cals |= TX_IQ_CAL;
@@ -340,7 +324,7 @@ static void ar9003_hw_init_cal_settings(
ah->enabled_cals |= TX_IQ_ON_AGC_CAL;
}
- ah->supp_cals = IQ_MISMATCH_CAL | TEMP_COMP_CAL;
+ ah->supp_cals = IQ_MISMATCH_CAL;
}
#define OFF_UPPER_LT 24
@@ -1399,9 +1383,6 @@ static void ar9003_hw_init_cal_common(st
INIT_CAL(&ah->iq_caldata);
INSERT_CAL(ah, &ah->iq_caldata);
- INIT_CAL(&ah->temp_caldata);
- INSERT_CAL(ah, &ah->temp_caldata);
-
/* Initialize current pointer to first element in list */
ah->cal_list_curr = ah->cal_list;
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -830,7 +830,6 @@ struct ath_hw {
/* Calibration */
u32 supp_cals;
struct ath9k_cal_list iq_caldata;
- struct ath9k_cal_list temp_caldata;
struct ath9k_cal_list adcgain_caldata;
struct ath9k_cal_list adcdc_caldata;
struct ath9k_cal_list *cal_list;
Patches currently in stable-queue which might be from nbd@nbd.name are
queue-4.8/revert-ath9k_hw-implement-temperature-compensation-support-for-ar9003.patch
reply other threads:[~2016-11-09 8:19 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=147867953018876@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=kvalo@qca.qualcomm.com \
--cc=nbd@nbd.name \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.