Re: [PATCH 2/3] ARM: exynos5420: dt: add clock entries to watchdog node

[Tomasz Figa <t.figa@samsung.com>]

Hi Sachin,

On Wednesday 24 of July 2013 15:18:26 Sachin Kamat wrote:
> Hi Leela,
> 
> On 24 July 2013 15:08, Leela Krishna Amudala <l.krishna@samsung.com> 
wrote:
> > This patch adds clock entries to watchdog node for exynos5420
> > as per the common clock framework of exynos5420
> > 
> > Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
> > Reviewed-by: Doug Anderson <dianders@chromium.org>
> > Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com>
> > ---
> > 
> >  arch/arm/boot/dts/exynos5420.dtsi |    6 ++++++
> >  1 file changed, 6 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/exynos5420.dtsi
> > b/arch/arm/boot/dts/exynos5420.dtsi index 8c54c4b..e1d2d20 100644
> > --- a/arch/arm/boot/dts/exynos5420.dtsi
> > +++ b/arch/arm/boot/dts/exynos5420.dtsi
> > @@ -145,4 +145,10 @@
> > 
> >                 clocks = <&clock 260>, <&clock 131>;
> >                 clock-names = "uart", "clk_uart_baud0";
> >         
> >         };
> > 
> > +
> > +       watchdog {
> > +               clocks = <&clock 316>;
> > +               clock-names = "watchdog";
> > +               status = "okay";
> 
> Generally you do "okay" in specific board dts files.

Not necessarily. The status property should be set to okay whenever the 
device represented by such node can already work with given set of 
information (properties).

Given the fact that watchdog driver does not require any board specific 
information, it can be instantiated regardless of the board.

Best regards,
Tomasz