From: Philippe Reynes <tremyfr@gmail.com>
To: jcliburn@gmail.com, chris.snook@gmail.com, davem@davemloft.net,
jarod@redhat.com, ben@decadent.org.uk
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Philippe Reynes <tremyfr@gmail.com>
Subject: [PATCH] net: atheros: atl2: use new api ethtool_{get|set}_link_ksettings
Date: Sun, 13 Nov 2016 18:53:28 +0100 [thread overview]
Message-ID: <1479059608-32456-1-git-send-email-tremyfr@gmail.com> (raw)
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
The previous implementation of set_settings was modifying
the value of advertising, but with the new API, it's not
possible. The structure ethtool_link_ksettings is defined
as const.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
drivers/net/ethernet/atheros/atlx/atl2.c | 66 ++++++++++++++++-------------
1 files changed, 36 insertions(+), 30 deletions(-)
diff --git a/drivers/net/ethernet/atheros/atlx/atl2.c b/drivers/net/ethernet/atheros/atlx/atl2.c
index 6911394..63f2dee 100644
--- a/drivers/net/ethernet/atheros/atlx/atl2.c
+++ b/drivers/net/ethernet/atheros/atlx/atl2.c
@@ -1737,81 +1737,87 @@ static void atl2_write_pci_cfg(struct atl2_hw *hw, u32 reg, u16 *value)
pci_write_config_word(adapter->pdev, reg, *value);
}
-static int atl2_get_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
+static int atl2_get_link_ksettings(struct net_device *netdev,
+ struct ethtool_link_ksettings *cmd)
{
struct atl2_adapter *adapter = netdev_priv(netdev);
struct atl2_hw *hw = &adapter->hw;
+ u32 supported, advertising;
- ecmd->supported = (SUPPORTED_10baseT_Half |
+ supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_Autoneg |
SUPPORTED_TP);
- ecmd->advertising = ADVERTISED_TP;
+ advertising = ADVERTISED_TP;
- ecmd->advertising |= ADVERTISED_Autoneg;
- ecmd->advertising |= hw->autoneg_advertised;
+ advertising |= ADVERTISED_Autoneg;
+ advertising |= hw->autoneg_advertised;
- ecmd->port = PORT_TP;
- ecmd->phy_address = 0;
- ecmd->transceiver = XCVR_INTERNAL;
+ cmd->base.port = PORT_TP;
+ cmd->base.phy_address = 0;
if (adapter->link_speed != SPEED_0) {
- ethtool_cmd_speed_set(ecmd, adapter->link_speed);
+ cmd->base.speed = adapter->link_speed;
if (adapter->link_duplex == FULL_DUPLEX)
- ecmd->duplex = DUPLEX_FULL;
+ cmd->base.duplex = DUPLEX_FULL;
else
- ecmd->duplex = DUPLEX_HALF;
+ cmd->base.duplex = DUPLEX_HALF;
} else {
- ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
- ecmd->duplex = DUPLEX_UNKNOWN;
+ cmd->base.speed = SPEED_UNKNOWN;
+ cmd->base.duplex = DUPLEX_UNKNOWN;
}
- ecmd->autoneg = AUTONEG_ENABLE;
+ cmd->base.autoneg = AUTONEG_ENABLE;
+
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+ supported);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+ advertising);
+
return 0;
}
-static int atl2_set_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
+static int atl2_set_link_ksettings(struct net_device *netdev,
+ const struct ethtool_link_ksettings *cmd)
{
struct atl2_adapter *adapter = netdev_priv(netdev);
struct atl2_hw *hw = &adapter->hw;
+ u32 advertising;
+
+ ethtool_convert_link_mode_to_legacy_u32(&advertising,
+ cmd->link_modes.advertising);
while (test_and_set_bit(__ATL2_RESETTING, &adapter->flags))
msleep(1);
- if (ecmd->autoneg == AUTONEG_ENABLE) {
+ if (cmd->base.autoneg == AUTONEG_ENABLE) {
#define MY_ADV_MASK (ADVERTISE_10_HALF | \
ADVERTISE_10_FULL | \
ADVERTISE_100_HALF| \
ADVERTISE_100_FULL)
- if ((ecmd->advertising & MY_ADV_MASK) == MY_ADV_MASK) {
+ if ((advertising & MY_ADV_MASK) == MY_ADV_MASK) {
hw->MediaType = MEDIA_TYPE_AUTO_SENSOR;
hw->autoneg_advertised = MY_ADV_MASK;
- } else if ((ecmd->advertising & MY_ADV_MASK) ==
- ADVERTISE_100_FULL) {
+ } else if ((advertising & MY_ADV_MASK) == ADVERTISE_100_FULL) {
hw->MediaType = MEDIA_TYPE_100M_FULL;
hw->autoneg_advertised = ADVERTISE_100_FULL;
- } else if ((ecmd->advertising & MY_ADV_MASK) ==
- ADVERTISE_100_HALF) {
+ } else if ((advertising & MY_ADV_MASK) == ADVERTISE_100_HALF) {
hw->MediaType = MEDIA_TYPE_100M_HALF;
hw->autoneg_advertised = ADVERTISE_100_HALF;
- } else if ((ecmd->advertising & MY_ADV_MASK) ==
- ADVERTISE_10_FULL) {
+ } else if ((advertising & MY_ADV_MASK) == ADVERTISE_10_FULL) {
hw->MediaType = MEDIA_TYPE_10M_FULL;
hw->autoneg_advertised = ADVERTISE_10_FULL;
- } else if ((ecmd->advertising & MY_ADV_MASK) ==
- ADVERTISE_10_HALF) {
+ } else if ((advertising & MY_ADV_MASK) == ADVERTISE_10_HALF) {
hw->MediaType = MEDIA_TYPE_10M_HALF;
hw->autoneg_advertised = ADVERTISE_10_HALF;
} else {
clear_bit(__ATL2_RESETTING, &adapter->flags);
return -EINVAL;
}
- ecmd->advertising = hw->autoneg_advertised |
+ advertising = hw->autoneg_advertised |
ADVERTISED_TP | ADVERTISED_Autoneg;
} else {
clear_bit(__ATL2_RESETTING, &adapter->flags);
@@ -2080,8 +2086,6 @@ static int atl2_nway_reset(struct net_device *netdev)
}
static const struct ethtool_ops atl2_ethtool_ops = {
- .get_settings = atl2_get_settings,
- .set_settings = atl2_set_settings,
.get_drvinfo = atl2_get_drvinfo,
.get_regs_len = atl2_get_regs_len,
.get_regs = atl2_get_regs,
@@ -2094,6 +2098,8 @@ static int atl2_nway_reset(struct net_device *netdev)
.get_eeprom_len = atl2_get_eeprom_len,
.get_eeprom = atl2_get_eeprom,
.set_eeprom = atl2_set_eeprom,
+ .get_link_ksettings = atl2_get_link_ksettings,
+ .set_link_ksettings = atl2_set_link_ksettings,
};
#define LBYTESWAP(a) ((((a) & 0x00ff00ff) << 8) | \
--
1.7.4.4
next reply other threads:[~2016-11-13 17:53 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-13 17:53 Philippe Reynes [this message]
2016-11-14 18:38 ` [PATCH] net: atheros: atl2: use new api ethtool_{get|set}_link_ksettings David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479059608-32456-1-git-send-email-tremyfr@gmail.com \
--to=tremyfr@gmail.com \
--cc=ben@decadent.org.uk \
--cc=chris.snook@gmail.com \
--cc=davem@davemloft.net \
--cc=jarod@redhat.com \
--cc=jcliburn@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.