From: Johan Hovold <johan@kernel.org>
To: Mugunthan V N <mugunthanvnm@ti.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>,
linux-omap@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, Johan Hovold <johan@kernel.org>
Subject: [PATCH net v2 3/7] net: ethernet: ti: cpsw: fix deferred probe
Date: Thu, 17 Nov 2016 17:40:00 +0100 [thread overview]
Message-ID: <1479400804-9847-4-git-send-email-johan@kernel.org> (raw)
In-Reply-To: <1479400804-9847-1-git-send-email-johan@kernel.org>
Make sure to deregister all child devices also on probe errors to avoid
leaks and to fix probe deferral:
cpsw 4a100000.ethernet: omap_device: omap_device_enable() called from invalid state 1
cpsw 4a100000.ethernet: use pm_runtime_put_sync_suspend() in driver?
cpsw: probe of 4a100000.ethernet failed with error -22
Add generic helper to undo the effects of cpsw_probe_dt(), which will
also be used in a follow-on patch to fix further leaks that have been
introduced more recently.
Note that the platform device is now runtime-resumed before registering
any child devices in order to make sure that it is synchronously
suspended after having deregistered the children in the error path.
Fixes: 1fb19aa730e4 ("net: cpsw: Add parent<->child relation support
between cpsw and mdio")
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/net/ethernet/ti/cpsw.c | 41 ++++++++++++++++++++++++-----------------
1 file changed, 24 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 84c5d214557e..5d14abb06486 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -2441,6 +2441,11 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
return 0;
}
+static void cpsw_remove_dt(struct platform_device *pdev)
+{
+ of_platform_depopulate(&pdev->dev);
+}
+
static int cpsw_probe_dual_emac(struct cpsw_priv *priv)
{
struct cpsw_common *cpsw = priv->cpsw;
@@ -2585,10 +2590,19 @@ static int cpsw_probe(struct platform_device *pdev)
/* Select default pin state */
pinctrl_pm_select_default_state(&pdev->dev);
+ /* Need to enable clocks with runtime PM api to access module
+ * registers
+ */
+ ret = pm_runtime_get_sync(&pdev->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(&pdev->dev);
+ goto clean_runtime_disable_ret;
+ }
+
if (cpsw_probe_dt(&cpsw->data, pdev)) {
dev_err(&pdev->dev, "cpsw: platform data missing\n");
ret = -ENODEV;
- goto clean_runtime_disable_ret;
+ goto clean_dt_ret;
}
data = &cpsw->data;
cpsw->rx_ch_num = 1;
@@ -2609,7 +2623,7 @@ static int cpsw_probe(struct platform_device *pdev)
GFP_KERNEL);
if (!cpsw->slaves) {
ret = -ENOMEM;
- goto clean_runtime_disable_ret;
+ goto clean_dt_ret;
}
for (i = 0; i < data->slaves; i++)
cpsw->slaves[i].slave_num = i;
@@ -2621,7 +2635,7 @@ static int cpsw_probe(struct platform_device *pdev)
if (IS_ERR(clk)) {
dev_err(priv->dev, "fck is not found\n");
ret = -ENODEV;
- goto clean_runtime_disable_ret;
+ goto clean_dt_ret;
}
cpsw->bus_freq_mhz = clk_get_rate(clk) / 1000000;
@@ -2629,25 +2643,17 @@ static int cpsw_probe(struct platform_device *pdev)
ss_regs = devm_ioremap_resource(&pdev->dev, ss_res);
if (IS_ERR(ss_regs)) {
ret = PTR_ERR(ss_regs);
- goto clean_runtime_disable_ret;
+ goto clean_dt_ret;
}
cpsw->regs = ss_regs;
- /* Need to enable clocks with runtime PM api to access module
- * registers
- */
- ret = pm_runtime_get_sync(&pdev->dev);
- if (ret < 0) {
- pm_runtime_put_noidle(&pdev->dev);
- goto clean_runtime_disable_ret;
- }
cpsw->version = readl(&cpsw->regs->id_ver);
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
cpsw->wr_regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(cpsw->wr_regs)) {
ret = PTR_ERR(cpsw->wr_regs);
- goto clean_pm_runtime_put_ret;
+ goto clean_dt_ret;
}
memset(&dma_params, 0, sizeof(dma_params));
@@ -2684,7 +2690,7 @@ static int cpsw_probe(struct platform_device *pdev)
default:
dev_err(priv->dev, "unknown version 0x%08x\n", cpsw->version);
ret = -ENODEV;
- goto clean_pm_runtime_put_ret;
+ goto clean_dt_ret;
}
for (i = 0; i < cpsw->data.slaves; i++) {
struct cpsw_slave *slave = &cpsw->slaves[i];
@@ -2713,7 +2719,7 @@ static int cpsw_probe(struct platform_device *pdev)
if (!cpsw->dma) {
dev_err(priv->dev, "error initializing dma\n");
ret = -ENOMEM;
- goto clean_pm_runtime_put_ret;
+ goto clean_dt_ret;
}
cpsw->txch[0] = cpdma_chan_create(cpsw->dma, 0, cpsw_tx_handler, 0);
@@ -2823,7 +2829,8 @@ static int cpsw_probe(struct platform_device *pdev)
cpsw_ale_destroy(cpsw->ale);
clean_dma_ret:
cpdma_ctlr_destroy(cpsw->dma);
-clean_pm_runtime_put_ret:
+clean_dt_ret:
+ cpsw_remove_dt(pdev);
pm_runtime_put_sync(&pdev->dev);
clean_runtime_disable_ret:
pm_runtime_disable(&pdev->dev);
@@ -2850,7 +2857,7 @@ static int cpsw_remove(struct platform_device *pdev)
cpsw_ale_destroy(cpsw->ale);
cpdma_ctlr_destroy(cpsw->dma);
- of_platform_depopulate(&pdev->dev);
+ cpsw_remove_dt(pdev);
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
if (cpsw->data.dual_emac)
--
2.7.3
next prev parent reply other threads:[~2016-11-17 16:40 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-17 16:39 [PATCH net v2 0/7] net: cpsw: fix leaks and probe deferral Johan Hovold
2016-11-17 16:39 ` [PATCH net v2 1/7] net: ethernet: ti: cpsw: fix bad register access in probe error path Johan Hovold
2016-11-17 16:39 ` [PATCH net v2 2/7] net: ethernet: ti: cpsw: fix mdio device reference leak Johan Hovold
2016-11-17 16:40 ` Johan Hovold [this message]
2016-11-17 16:40 ` [PATCH net v2 4/7] net: ethernet: ti: cpsw: fix of_node and phydev leaks Johan Hovold
2016-11-17 16:40 ` [PATCH net v2 5/7] net: ethernet: ti: cpsw: fix secondary-emac probe error path Johan Hovold
2016-11-17 16:40 ` [PATCH net v2 6/7] net: ethernet: ti: cpsw: add missing sanity check Johan Hovold
2016-11-17 16:40 ` [PATCH net v2 7/7] net: ethernet: ti: cpsw: fix fixed-link phy probe deferral Johan Hovold
2016-11-17 17:04 ` David Miller
2016-11-17 17:19 ` Johan Hovold
2016-11-18 9:33 ` Johan Hovold
2016-11-18 18:48 ` David Miller
2016-11-18 18:49 ` [PATCH net v2 0/7] net: cpsw: fix leaks and " David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479400804-9847-4-git-send-email-johan@kernel.org \
--to=johan@kernel.org \
--cc=grygorii.strashko@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mugunthanvnm@ti.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.