From: Marcel Apfelbaum <marcel@redhat.com>
To: qemu-devel@nongnu.org
Cc: mst@redhat.com, laine@redhat.com, drjones@redhat.com,
abologna@redhat.com, marcel@redhat.com
Subject: [Qemu-devel] [PATCH 2/3] hw/ioh3420: derive from PCI Express Root Port base class
Date: Wed, 23 Nov 2016 14:02:48 +0200 [thread overview]
Message-ID: <1479902569-5548-3-git-send-email-marcel@redhat.com> (raw)
In-Reply-To: <1479902569-5548-1-git-send-email-marcel@redhat.com>
Preserve only Intel specific details.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
---
hw/pci-bridge/ioh3420.c | 150 +++---------------------------------------------
1 file changed, 7 insertions(+), 143 deletions(-)
diff --git a/hw/pci-bridge/ioh3420.c b/hw/pci-bridge/ioh3420.c
index c8b5ac4..431266c 100644
--- a/hw/pci-bridge/ioh3420.c
+++ b/hw/pci-bridge/ioh3420.c
@@ -38,140 +38,6 @@
#define IOH_EP_EXP_OFFSET 0x90
#define IOH_EP_AER_OFFSET 0x100
-/*
- * If two MSI vector are allocated, Advanced Error Interrupt Message Number
- * is 1. otherwise 0.
- * 17.12.5.10 RPERRSTS, 32:27 bit Advanced Error Interrupt Message Number.
- */
-static uint8_t ioh3420_aer_vector(const PCIDevice *d)
-{
- switch (msi_nr_vectors_allocated(d)) {
- case 1:
- return 0;
- case 2:
- return 1;
- case 4:
- case 8:
- case 16:
- case 32:
- default:
- break;
- }
- abort();
- return 0;
-}
-
-static void ioh3420_aer_vector_update(PCIDevice *d)
-{
- pcie_aer_root_set_vector(d, ioh3420_aer_vector(d));
-}
-
-static void ioh3420_write_config(PCIDevice *d,
- uint32_t address, uint32_t val, int len)
-{
- uint32_t root_cmd =
- pci_get_long(d->config + d->exp.aer_cap + PCI_ERR_ROOT_COMMAND);
-
- pci_bridge_write_config(d, address, val, len);
- ioh3420_aer_vector_update(d);
- pcie_cap_slot_write_config(d, address, val, len);
- pcie_aer_write_config(d, address, val, len);
- pcie_aer_root_write_config(d, address, val, len, root_cmd);
-}
-
-static void ioh3420_reset(DeviceState *qdev)
-{
- PCIDevice *d = PCI_DEVICE(qdev);
-
- ioh3420_aer_vector_update(d);
- pcie_cap_root_reset(d);
- pcie_cap_deverr_reset(d);
- pcie_cap_slot_reset(d);
- pcie_cap_arifwd_reset(d);
- pcie_aer_root_reset(d);
- pci_bridge_reset(qdev);
- pci_bridge_disable_base_limit(d);
-}
-
-static int ioh3420_initfn(PCIDevice *d)
-{
- PCIEPort *p = PCIE_PORT(d);
- PCIESlot *s = PCIE_SLOT(d);
- int rc;
- Error *err = NULL;
-
- pci_config_set_interrupt_pin(d->config, 1);
- pci_bridge_initfn(d, TYPE_PCIE_BUS);
- pcie_port_init_reg(d);
-
- rc = pci_bridge_ssvid_init(d, IOH_EP_SSVID_OFFSET,
- IOH_EP_SSVID_SVID, IOH_EP_SSVID_SSID);
- if (rc < 0) {
- goto err_bridge;
- }
-
- rc = msi_init(d, IOH_EP_MSI_OFFSET, IOH_EP_MSI_NR_VECTOR,
- IOH_EP_MSI_SUPPORTED_FLAGS & PCI_MSI_FLAGS_64BIT,
- IOH_EP_MSI_SUPPORTED_FLAGS & PCI_MSI_FLAGS_MASKBIT, &err);
- if (rc < 0) {
- assert(rc == -ENOTSUP);
- error_report_err(err);
- goto err_bridge;
- }
-
- rc = pcie_cap_init(d, IOH_EP_EXP_OFFSET, PCI_EXP_TYPE_ROOT_PORT, p->port);
- if (rc < 0) {
- goto err_msi;
- }
-
- pcie_cap_arifwd_init(d);
- pcie_cap_deverr_init(d);
- pcie_cap_slot_init(d, s->slot);
- pcie_cap_root_init(d);
-
- pcie_chassis_create(s->chassis);
- rc = pcie_chassis_add_slot(s);
- if (rc < 0) {
- goto err_pcie_cap;
- }
-
- rc = pcie_aer_init(d, IOH_EP_AER_OFFSET, PCI_ERR_SIZEOF);
- if (rc < 0) {
- goto err;
- }
- pcie_aer_root_init(d);
- ioh3420_aer_vector_update(d);
-
- return 0;
-
-err:
- pcie_chassis_del_slot(s);
-err_pcie_cap:
- pcie_cap_exit(d);
-err_msi:
- msi_uninit(d);
-err_bridge:
- pci_bridge_exitfn(d);
- return rc;
-}
-
-static void ioh3420_exitfn(PCIDevice *d)
-{
- PCIESlot *s = PCIE_SLOT(d);
-
- pcie_aer_exit(d);
- pcie_chassis_del_slot(s);
- pcie_cap_exit(d);
- msi_uninit(d);
- pci_bridge_exitfn(d);
-}
-
-static Property ioh3420_props[] = {
- DEFINE_PROP_BIT(COMPAT_PROP_PCP, PCIDevice, cap_present,
- QEMU_PCIE_SLTCAP_PCP_BITNR, true),
- DEFINE_PROP_END_OF_LIST()
-};
-
static const VMStateDescription vmstate_ioh3420 = {
.name = "ioh-3240-express-root-port",
.version_id = 1,
@@ -189,25 +55,23 @@ static void ioh3420_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+ PCIERootPortClass *rpc = PCIE_ROOT_PORT_CLASS(klass);
- k->is_express = 1;
- k->is_bridge = 1;
- k->config_write = ioh3420_write_config;
- k->init = ioh3420_initfn;
- k->exit = ioh3420_exitfn;
k->vendor_id = PCI_VENDOR_ID_INTEL;
k->device_id = PCI_DEVICE_ID_IOH_EPORT;
k->revision = PCI_DEVICE_ID_IOH_REV;
- set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
dc->desc = "Intel IOH device id 3420 PCIE Root Port";
- dc->reset = ioh3420_reset;
dc->vmsd = &vmstate_ioh3420;
- dc->props = ioh3420_props;
+ rpc->msi_offset = IOH_EP_MSI_OFFSET;
+ rpc->exp_offset = IOH_EP_EXP_OFFSET;
+ rpc->aer_offset = IOH_EP_AER_OFFSET;
+ rpc->ssvid_offset = IOH_EP_SSVID_OFFSET;
+ rpc->ssid = IOH_EP_SSVID_SSID;
}
static const TypeInfo ioh3420_info = {
.name = "ioh3420",
- .parent = TYPE_PCIE_SLOT,
+ .parent = TYPE_PCIE_ROOT_PORT,
.class_init = ioh3420_class_init,
};
--
2.5.5
next prev parent reply other threads:[~2016-11-23 12:03 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-23 12:02 [Qemu-devel] [PATCH for-2.9 0/3] hw/pcie: Introduce Generic PCI Express Root Port Marcel Apfelbaum
2016-11-23 12:02 ` [Qemu-devel] [PATCH 1/3] hw/pcie: Introduce a base class for PCI Express Root Ports Marcel Apfelbaum
2016-11-23 12:02 ` Marcel Apfelbaum [this message]
2016-11-23 12:02 ` [Qemu-devel] [PATCH 3/3] hw/pcie: Introduce Generic PCI Express Root Port Marcel Apfelbaum
2016-11-23 13:19 ` [Qemu-devel] [PATCH for-2.9 0/3] " Michael S. Tsirkin
2016-11-25 13:48 ` Andrea Bolognani
2017-01-10 4:03 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479902569-5548-3-git-send-email-marcel@redhat.com \
--to=marcel@redhat.com \
--cc=abologna@redhat.com \
--cc=drjones@redhat.com \
--cc=laine@redhat.com \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.