From: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
To: bjorn.andersson@linaro.org
Cc: sboyd@codeaurora.org, agross@codeaurora.org,
linux-arm-msm@vger.kernel.org,
Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
Subject: [RESEND PATCH v4 1/7] remoteproc: qcom: Add and initialize private data for hexagon dsp.
Date: Thu, 24 Nov 2016 15:30:32 +0530 [thread overview]
Message-ID: <1479981638-32069-2-git-send-email-akdwived@codeaurora.org> (raw)
In-Reply-To: <1479981638-32069-1-git-send-email-akdwived@codeaurora.org>
Resource string's specific to version of hexagon chip are initialized
to be passed to probe for various resource init purpose.
Also compatible string introduced are added to documentation.
Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
---
.../devicetree/bindings/remoteproc/qcom,q6v5.txt | 2 +
drivers/remoteproc/qcom_q6v5_pil.c | 61 +++++++++++++++++++++-
2 files changed, 62 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 57cb49e..d4c14f0 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -8,6 +8,8 @@ on the Qualcomm Hexagon core.
Value type: <string>
Definition: must be one of:
"qcom,q6v5-pil"
+ "qcom,q6v5-5-1-1-pil"
+ "qcom,q6v56-1-5-0-pil"
- reg:
Usage: required
diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_pil.c
index 2e0caaa..3360312 100644
--- a/drivers/remoteproc/qcom_q6v5_pil.c
+++ b/drivers/remoteproc/qcom_q6v5_pil.c
@@ -30,6 +30,7 @@
#include <linux/reset.h>
#include <linux/soc/qcom/smem.h>
#include <linux/soc/qcom/smem_state.h>
+#include <linux/of_device.h>
#include "remoteproc_internal.h"
#include "qcom_mdt_loader.h"
@@ -93,6 +94,22 @@
#define QDSS_BHS_ON BIT(21)
#define QDSS_LDO_BYP BIT(22)
+struct rproc_hexagon_res {
+ char *hexagon_mba_image;
+ char **proxy_reg_string;
+ char **active_reg_string;
+ int proxy_uV_uA[3][2];
+ int active_uV_uA[1][2];
+ char **proxy_clk_string;
+ char **active_clk_string;
+ int hexagon_ver;
+};
+
+struct reg_info {
+ struct regulator *reg;
+ int uV;
+ int uA;
+};
struct q6v5 {
struct device *dev;
struct rproc *rproc;
@@ -131,6 +148,12 @@ struct q6v5 {
};
enum {
+ Q6V5_5_0_0, /*hexagon on msm8916*/
+ Q6V5_5_1_1, /*hexagon on msm8974*/
+ Q5V56_1_5_0, /*hexagon on msm8996*/
+};
+
+enum {
Q6V5_SUPPLY_CX,
Q6V5_SUPPLY_MX,
Q6V5_SUPPLY_MSS,
@@ -890,8 +913,44 @@ static int q6v5_remove(struct platform_device *pdev)
return 0;
}
+static const struct rproc_hexagon_res q6v56_1_5_0_res = {
+ .hexagon_mba_image = "mba.mbn",
+ .proxy_reg_string = (char*[]){"mx", "cx", "pll", NULL},
+ .active_reg_string = NULL,
+ .proxy_uV_uA = { {0, 0}, {0, 100000}, {0, 100000} },
+ .active_uV_uA = { {0} },
+ .proxy_clk_string = (char*[]){"xo", "pnoc", "qdss", NULL},
+ .active_clk_string = (char*[]){"iface", "bus", "mem",
+ "gpll0_mss_clk", "snoc_axi_clk", "mnoc_axi_clk", NULL},
+ .hexagon_ver = Q5V56_1_5_0,
+};
+
+static const struct rproc_hexagon_res q6v5_5_0_0_res = {
+ .hexagon_mba_image = "mba.mbn",
+ .proxy_reg_string = (char*[]){"mx", "cx", "pll", NULL},
+ .proxy_uV_uA = { {1050000, 0}, {0, 100000}, {0, 100000} },
+ .active_reg_string = (char*[]){"mss", NULL},
+ .active_uV_uA = { {1000000, 100000} },
+ .proxy_clk_string = (char*[]){"xo", NULL},
+ .active_clk_string = (char*[]){"iface", "bus", "mem", NULL},
+ .hexagon_ver = Q6V5_5_0_0,
+};
+
+static const struct rproc_hexagon_res q6v5_5_1_1_res = {
+ .hexagon_mba_image = "mba.b00",
+ .proxy_reg_string = (char*[]){"mx", "cx", "pll", NULL},
+ .proxy_uV_uA = { {1050000, 0}, {0, 100000}, {0, 100000} },
+ .active_reg_string = (char*[]){"mss", NULL},
+ .active_uV_uA = { {1000000, 100000} },
+ .proxy_clk_string = (char*[]){"xo", NULL},
+ .active_clk_string = (char*[]){"iface", "bus", "mem", NULL},
+ .hexagon_ver = Q6V5_5_1_1,
+};
+
static const struct of_device_id q6v5_of_match[] = {
- { .compatible = "qcom,q6v5-pil", },
+ { .compatible = "qcom,q6v5-pil", .data = &q6v5_5_0_0_res},
+ { .compatible = "qcom,q6v5-5-1-1-pil", .data = &q6v5_5_1_1_res},
+ { .compatible = "qcom,q6v56-1-5-0-pil", .data = &q6v56_1_5_0_res},
{ },
};
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2016-11-24 10:01 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-24 10:00 [RESEND PATCH v4 0/7]remoteproc: qcom: Add support to hexagon v56 1.5.0 in qcom hexagon rproc driver Avaneesh Kumar Dwivedi
2016-11-24 10:00 ` Avaneesh Kumar Dwivedi [this message]
2016-12-08 21:37 ` [RESEND PATCH v4 1/7] remoteproc: qcom: Add and initialize private data for hexagon dsp Bjorn Andersson
2016-12-09 11:42 ` Dwivedi, Avaneesh Kumar (avani)
2016-12-09 19:32 ` Bjorn Andersson
2016-11-24 10:00 ` [RESEND PATCH v4 2/7] remoteproc: qcom: Initialize proxy and active clock's and regulator's Avaneesh Kumar Dwivedi
2016-12-09 2:36 ` Bjorn Andersson
2016-12-09 15:53 ` Dwivedi, Avaneesh Kumar (avani)
2016-11-24 10:00 ` [RESEND PATCH v4 3/7] remoteproc: qcom: Modify regulator enable and disable interface Avaneesh Kumar Dwivedi
2016-12-09 2:44 ` Bjorn Andersson
2016-12-12 8:21 ` Dwivedi, Avaneesh Kumar (avani)
2016-11-24 10:00 ` [RESEND PATCH v4 4/7] remoteproc: qcom: Modify clock enable and disable routine Avaneesh Kumar Dwivedi
2016-12-09 2:57 ` Bjorn Andersson
2016-12-12 8:23 ` Dwivedi, Avaneesh Kumar (avani)
2016-11-24 10:00 ` [RESEND PATCH v4 5/7] remoteproc: qcom: Modify reset sequence for hexagon to support v56 1.5.0 Avaneesh Kumar Dwivedi
2016-12-09 4:35 ` Bjorn Andersson
2016-12-12 12:45 ` Dwivedi, Avaneesh Kumar (avani)
2016-12-13 18:09 ` Bjorn Andersson
2016-12-13 19:45 ` Dwivedi, Avaneesh Kumar (avani)
2016-12-13 22:07 ` Bjorn Andersson
2016-12-14 15:50 ` Dwivedi, Avaneesh Kumar (avani)
2016-12-14 20:13 ` Bjorn Andersson
2016-11-24 10:00 ` [RESEND PATCH v4 6/7] remoteproc: qcom: Modify stop routine to limit MX current for v56 1.5 Avaneesh Kumar Dwivedi
2016-12-09 4:42 ` Bjorn Andersson
2016-12-12 13:04 ` Dwivedi, Avaneesh Kumar (avani)
2016-11-24 10:00 ` [RESEND PATCH v4 7/7] clk: qcom: Add GCC_MSS_RESET support to reset MSS in v56 1.5.0 Avaneesh Kumar Dwivedi
2016-12-08 19:51 ` Bjorn Andersson
2016-12-12 13:05 ` Dwivedi, Avaneesh Kumar (avani)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479981638-32069-2-git-send-email-akdwived@codeaurora.org \
--to=akdwived@codeaurora.org \
--cc=agross@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.