From: Jagan Teki <jagan@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Pull request: u-boot-spi/sunxi
Date: Thu, 24 Nov 2016 20:05:55 +0530 [thread overview]
Message-ID: <1479998155-7003-1-git-send-email-jagan@openedev.com> (raw)
Hi Tom,
These are the pending patches, from u-boot-sunxi/next.
Will send sunxi PR on top of u-boot-sunxi repo once I get the access,
meanwhile please take this PR.
Hans, Let me know if I miss any patches from next.
thanks!
Jagan.
The following changes since commit fc127d184aea293ec415dd66e3282dba0b66c5f3:
colibri_pxa270: drop edit, elf, fpga, hush, regex et al. for space reason (2016-11-23 13:53:20 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-spi.git sunxi
for you to fetch changes up to e68a831cacc85ea1da274f3c8d19bb98c1141a97:
nand: sunxi: Add options for the SPL NAND configuration (2016-11-24 19:40:49 +0530)
----------------------------------------------------------------
Boris Brezillon (1):
mtd: nand: add support for the TC58NVG2S0H chip
Chen-Yu Tsai (9):
ARM: PSCI: Set ARMV7_PSCI_NR_CPUS default to 8 for sun9i/A80
sunxi: Add CCI-400 and CPUCFG registers base address for sun9i/A80
sunxi: Add base address of secure SRAM B for sun9i/A80
sunxi: Use secure SRAM B for secure RAM for sun9i/A80
sunxi: Add PRCM register definition for sun9i/A80
sunxi: Add CPUCFG register definitions for sun9i/A80
sunxi: Add support for TZPC on sun9i/A80
sunxi: Add basic PSCI implementation for A80
sunxi: Enable PSCI on sun9i/A80
Emmanuel Vadot (1):
sunxi: mmc: Set CONFIG_SYS_MMC_MAX_DEVICE
Hans de Goede (1):
sunxi: Mele_M5_defconfig: Drop non existing STATUSLED setting
Jelle van der Waa (1):
sunxi: Use the available Kconfig option for AHCI
Marcel Ziswiler (1):
colibri_pxa270: transition to driver model for serial
Maxime Ripard (3):
sunxi: Sync GR8 DTS and AXP209 with the kernel
tools: sunxi: Add spl image builder
nand: sunxi: Add options for the SPL NAND configuration
Yann E. MORIN (1):
arm: sunxi: do not force USB for arch-sunxi
arch/arm/Kconfig | 10 +-
arch/arm/cpu/armv7/Kconfig | 1 +
arch/arm/cpu/armv7/sunxi/Makefile | 5 +
arch/arm/cpu/armv7/sunxi/psci-mcpm.c | 234 +++++
arch/arm/cpu/armv7/sunxi/tzpc.c | 6 +
arch/arm/dts/Makefile | 1 +
arch/arm/dts/axp209.dtsi | 6 +
arch/arm/dts/ntc-gr8-chip-pro.dts | 266 ++++++
arch/arm/dts/ntc-gr8.dtsi | 1132 ++++++++++++++++++++++++
arch/arm/include/asm/arch-sunxi/cpu_sun9i.h | 5 +
arch/arm/include/asm/arch-sunxi/cpucfg_sun9i.h | 51 ++
arch/arm/include/asm/arch-sunxi/prcm_sun9i.h | 55 ++
arch/arm/include/asm/arch-sunxi/tzpc.h | 4 +
arch/arm/mach-sunxi/board.c | 3 +-
board/sunxi/Kconfig | 4 +
board/toradex/colibri_pxa270/colibri_pxa270.c | 18 +-
configs/A10-OLinuXino-Lime_defconfig | 3 +-
configs/A20-OLinuXino-Lime2_defconfig | 3 +-
configs/A20-OLinuXino-Lime_defconfig | 3 +-
configs/A20-OLinuXino_MICRO_defconfig | 3 +-
configs/A20-Olimex-SOM-EVB_defconfig | 3 +-
configs/Bananapi_defconfig | 3 +-
configs/Bananapro_defconfig | 3 +-
configs/Cubieboard2_defconfig | 3 +-
configs/Cubieboard_defconfig | 3 +-
configs/Cubietruck_defconfig | 3 +-
configs/Itead_Ibox_A20_defconfig | 3 +-
configs/Lamobo_R1_defconfig | 3 +-
configs/Linksprite_pcDuino3_Nano_defconfig | 3 +-
configs/Linksprite_pcDuino3_defconfig | 3 +-
configs/Marsboard_A10_defconfig | 3 +-
configs/Mele_A1000_defconfig | 3 +-
configs/Mele_M5_defconfig | 3 +-
configs/Orangepi_defconfig | 3 +-
configs/Orangepi_mini_defconfig | 3 +-
configs/Wits_Pro_A20_DKT_defconfig | 3 +-
configs/colibri_pxa270_defconfig | 2 +
drivers/mtd/nand/Kconfig | 16 +
drivers/mtd/nand/nand_ids.c | 3 +
include/configs/colibri_pxa270.h | 2 -
include/configs/sun9i.h | 4 +
include/configs/sunxi-common.h | 1 +
scripts/config_whitelist.txt | 1 -
tools/.gitignore | 1 +
tools/Makefile | 1 +
tools/sunxi-spl-image-builder.c | 1117 +++++++++++++++++++++++
46 files changed, 2978 insertions(+), 31 deletions(-)
create mode 100644 arch/arm/cpu/armv7/sunxi/psci-mcpm.c
create mode 100644 arch/arm/dts/ntc-gr8-chip-pro.dts
create mode 100644 arch/arm/dts/ntc-gr8.dtsi
create mode 100644 arch/arm/include/asm/arch-sunxi/cpucfg_sun9i.h
create mode 100644 arch/arm/include/asm/arch-sunxi/prcm_sun9i.h
create mode 100644 tools/sunxi-spl-image-builder.c
next reply other threads:[~2016-11-24 14:35 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-24 14:35 Jagan Teki [this message]
2016-11-24 14:55 ` [U-Boot] Pull request: u-boot-spi/sunxi Maxime Ripard
2016-11-24 16:00 ` Hans de Goede
2016-11-24 18:36 ` Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479998155-7003-1-git-send-email-jagan@openedev.com \
--to=jagan@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.