From mboxrd@z Thu Jan 1 00:00:00 1970 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Message-ID: <14801.4812.235660.20792@esb.bbn.com> Date: Tue, 26 Sep 2000 17:19:08 -0400 From: R Shapiro To: Michael Schmitz Cc: daenzerm@student.ethz.ch, Michael Schmitz , linuxppc-dev@lists.linuxppc.org Subject: Re: xf 4.0.1 + ati driver with rage II/rage pro In-Reply-To: References: <39D0F7EB.C0415571@relog.ch> Reply-To: rshapiro@bbn.com Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Michael Schmitz writes: > could you post the kernel boot messages again? You mean the dmesg? Here it is. After that is the XF86Config. dmesg ----- device tree used 35560 bytes Total memory = 128MB; using 512kB for hash table (at c0280000) Linux version 2.2.15pre3 (benh@sawtooth.wanadoo.fr) (gcc version 2.95.2 19991024 (release/franzo)) #3 Sat Jan 29 18:02:45 CET 2000 PCI bus 0 controlled by pci at 80000000 Registered 1 feature controller(s) System has 64 possible interrupts via_calibrate_decr: decrementer_count = 167082 (1002497 ticks) Console: colour dummy device 80x25 Calibrating delay loop... 534.12 BogoMIPS Memory: 126664k available (1460k kernel code, 2796k data, 152k init) [c0000000,c8000000] Dentry hash table entries: 16384 (order 5, 128k) Buffer cache hash table entries: 131072 (order 7, 512k) Page cache hash table entries: 32768 (order 5, 128k) POSIX conformance testing by UNIFIX PCI: Probing PCI hardware adb devices: [2]: 2 2 [3]: 3 1 Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP TCP: Hash tables configured (ehash 131072 bhash 65536) NET4: AppleTalk 0.18 for Linux NET4.0 Starting kswapd v 1.5 OHCI USB Driver loading usbcore: Registered new driver mouse USB HID boot protocol mouse driver registered. usbcore: Registered new driver keyboard usbcore: Registered new driver hub MacOS display is /pci/ATY,mach64_3DU atyfb: 3D RAGE (GT) [0x4754 rev 0x9a] 2M SGRAM, 14.31818 MHz XTAL, 200 MHz PLL, 67 Mhz MCLK BUS_CNTL DAC_CNTL MEM_CNTL EXT_MEM_CNTL CRTC_GEN_CNTL DSP_CONFIG DSP_ON_OFF 7b23a040 86010182 004215b3 25010001 03000200 002806e3 02100503 PLL ad d5 21 44 e8 13 80 b5 8e 9e 98 04 a6 1b 00 00 Console: switching to colour frame buffer device 160x64 fb0: ATY Mach64 frame buffer device on /pci/ATY,mach64_3DU atyfb: 3D RAGE PRO (BGA, PCI) [0x4749 rev 0x7c] 4M SGRAM, 14.31818 MHz XTAL, 230 MHz PLL, 100 Mhz MCLK BUS_CNTL DAC_CNTL MEM_CNTL EXT_MEM_CNTL CRTC_GEN_CNTL DSP_CONFIG DSP_ON_OFF 7b33a040 87010182 04651a77 75130c01 03000300 00280509 01f004f1 PLL ad d5 21 64 e4 13 80 b5 8e 9e 98 01 a6 1b 00 00 fb1: ATY Mach64 frame buffer device on /pci/ATY,XCLAIM3DPro atyfb: 3D RAGE PRO (BGA, PCI) [0x4749 rev 0x7c] 4M SGRAM, 14.31818 MHz XTAL, 230 MHz PLL, 100 Mhz MCLK BUS_CNTL DAC_CNTL MEM_CNTL EXT_MEM_CNTL CRTC_GEN_CNTL DSP_CONFIG DSP_ON_OFF 7b33a040 87010102 04651a77 75130c01 03000300 00280509 01f004f1 PLL ad d5 21 64 e4 13 80 b5 8e 9e 98 01 a6 1b 00 00 fb2: ATY Mach64 frame buffer device on /pci/ATY,XCLAIM3DPro ADB keyboard at 2, handler set to 3 ADB mouse at 3, handler set to 4 PowerMac Z8530 serial driver version 2.0 tty00 at 0xf3013020 (irq = 15) is a Z8530 ESCC, port = modem tty01 at 0xf3013000 (irq = 16) is a Z8530 ESCC, port = printer pty: 256 Unix98 ptys configured Macintosh ADB mouse driver installed. Macintosh non-volatile memory driver v1.0 RAM disk driver initialized: 16 RAM disks of 4096K size loop: registered device at major 7 pmac_ide: enabling IDE bus ID 0 pmac_ide: enabling IDE bus ID 1 hda: QUANTUM FIREBALL ST6400A, ATA DISK drive hdc: MATSHITA CR-585, ATAPI CDROM drive ide0 at 0xf5020000-0xf5020007,0xf5020160 on irq 13 ide1 at 0xf5021000-0xf5021007,0xf5021160 on irq 14 hda: Enabling MultiWord DMA 2 hda: QUANTUM FIREBALL ST6400A, 6149MB w/81kB Cache, CHS=13328/15/63, (U)DMA hdc: Enabling MultiWord DMA 1 hdc: ATAPI 24X CD-ROM drive, 128kB Cache Uniform CDROM driver Revision: 2.56 fd0: SWIM3 floppy controller scsi0 : MESH scsi : 1 host. Vendor: IOMEGA Model: ZIP 100 Rev: J.03 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi removable disk sda at scsi0, channel 0, id 5, lun 0 scsi : detected 1 SCSI disk total. sda : READ CAPACITY failed. sda : status = 0, message = 00, host = 0, driver = 08 sda : extended sense code = 2 sda : block size assumed to be 512 bytes, disk size 1GB. PPP: version 2.3.7 (demand dialling) TCP compression code copyright 1989 Regents of the University of California PPP line discipline registered. eth0: BMAC at 00:05:02:ee:c7:32 Partition check: sda:scsidisk I/O error: dev 08:00, sector 0 unable to read partition table hda: hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8 hda9 hda10 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 152k init 32k prep Adding Swap: 99996k swap-space (priority -1) grep uses obsolete /proc/pci interface DMA sound driver installed, using 4 buffers of 32k. phy registers: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 MOL module inited ----- XF86Config -- this is with the fbdev drivers, which works ok. The broken version is identical except fbdev->ati. ---- Section "ServerLayout" Identifier "XFree86 Configured" Screen "Screen0" Screen "Screen1" RightOf "Screen0" Screen "Screen2" LeftOf "Screen0" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "XkbModel" "macintosh_old" # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "busmouse" Option "Device" "/dev/adbmouse" # wheel support # Option "ZAxisMapping" "4 5" EndSection Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # FontPath "/usr/X11R6/lib/X11/fonts/local/" # FontPath "/usr/X11R6/lib/X11/fonts/misc/" # FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" # FontPath "/usr/X11R6/lib/X11/fonts/Type1/" # FontPath "/usr/X11R6/lib/X11/fonts/CID/" # FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" # FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" FontPath "unix/:7100" FontPath "tcp/blatz:7100" # ModulePath can be used to set a search path for the X server modules. # The default path is shown here. # ModulePath "/usr/X11R6/lib/modules" EndSection Section "Module" Load "GLcore" Load "dbe" # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection Load "glx" Load "pex5" Load "record" Load "xie" Load "type1" Load "speedo" EndSection Section "Monitor" Identifier "Monitor" VendorName "Optiquest" ModelName "Optiquest V95" # Should really get these from the Optiquest spec HorizSync 1-300 VertRefresh 1-300 Mode "1152x870" # D: 134.445 MHz, H: 86.183 kHz, V: 94.498 Hz DotClock 134.446 HTimings 1152 1216 1328 1560 VTimings 870 871 874 912 Flags "+HSync" "+VSync" EndMode Mode "1280x1024" # D: 134.445 MHz, H: 79.647 kHz, V: 74.716 Hz DotClock 134.446 HTimings 1280 1344 1456 1688 VTimings 1024 1025 1028 1066 Flags "+HSync" "+VSync" EndMode EndSection # First Display Section "Device" ### Available Driver options are:- #Option "NoAccel" #Option "SWcursor" Option "HWcursor" #Option "Dac6Bit" #Option "Dac8Bit" Option "UseFBDev" Option "fbdev" "/dev/fb0" # Option "NoShadowFB" Identifier "device0" Driver "fbdev" BusID "PCI:0:18:0" EndSection # For now default to 8bpp, in order to get 1280x1024 resolution. # Change to 15 as soon as this card has more vram. Section "Screen" Identifier "Screen0" Device "device0" Monitor "Monitor" DefaultDepth 8 SubSection "Display" Depth 8 Modes "1280x1024" EndSubSection SubSection "Display" Depth 15 Modes "1152x870" EndSubSection EndSection # Second Display Section "Device" ### Available Driver options are:- #Option "NoAccel" #Option "SWcursor" Option "HWcursor" #Option "Dac6Bit" #Option "Dac8Bit" Option "UseFBDev" Option "fbdev" "/dev/fb1" # Option "NoShadowFB" Identifier "device1" Driver "fbdev" BusID "PCI:0:13:0" EndSection # For now default to 8bpp, since Screen 0 is running at that depth (for 1280x1024 res) # and xinerama can't run unless all three screen are at the same depth. # Change to 15 as soon as Screen 0 gets more vram. Section "Screen" Identifier "Screen1" Device "device1" Monitor "Monitor" DefaultDepth 8 SubSection "Display" Depth 8 Modes "1280x1024" EndSubSection SubSection "Display" Depth 15 Modes "1280x1024" EndSubSection EndSection # Third Display Section "Device" ### Available Driver options are:- #Option "NoAccel" #Option "SWcursor" Option "HWcursor" #Option "Dac6Bit" #Option "Dac8Bit" Option "UseFBDev" Option "fbdev" "/dev/fb2" # Option "NoShadowFB" Identifier "device2" Driver "fbdev" BusID "PCI:0:15:0" EndSection # For now default to 8bpp, since Screen 0 is running at that depth (for 1280x1024 res) # and xinerama can't run unless all three screen are at the same depth. # Change to 15 as soon as Screen 0 gets more vram. Section "Screen" Identifier "Screen2" Device "device2" Monitor "Monitor" DefaultDepth 8 SubSection "Display" Depth 8 Modes "1280x1024" EndSubSection SubSection "Display" Depth 15 Modes "1280x1024" EndSubSection EndSection -- rshapiro@bbn.com ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/