From: <gregkh@linuxfoundation.org>
To: dave.anglin@bell.net, deller@gmx.de, gregkh@linuxfoundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "parisc: Also flush data TLB in flush_icache_page_asm" has been added to the 4.4-stable tree
Date: Tue, 29 Nov 2016 16:33:34 +0100 [thread overview]
Message-ID: <1480433614199117@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
parisc: Also flush data TLB in flush_icache_page_asm
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
parisc-also-flush-data-tlb-in-flush_icache_page_asm.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 5035b230e7b67ac12691ed3b5495bbb617027b68 Mon Sep 17 00:00:00 2001
From: John David Anglin <dave.anglin@bell.net>
Date: Thu, 24 Nov 2016 20:18:14 -0500
Subject: parisc: Also flush data TLB in flush_icache_page_asm
From: John David Anglin <dave.anglin@bell.net>
commit 5035b230e7b67ac12691ed3b5495bbb617027b68 upstream.
This is the second issue I noticed in reviewing the parisc TLB code.
The fic instruction may use either the instruction or data TLB in
flushing the instruction cache. Thus, on machines with a split TLB, we
should also flush the data TLB after setting up the temporary alias
registers.
Although this has no functional impact, I changed the pdtlb and pitlb
instructions to consistently use the index register %r0. These
instructions do not support integer displacements.
Tested on rp3440 and c8000.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/parisc/kernel/pacache.S | 37 ++++++++++++++++++++++---------------
1 file changed, 22 insertions(+), 15 deletions(-)
--- a/arch/parisc/kernel/pacache.S
+++ b/arch/parisc/kernel/pacache.S
@@ -96,7 +96,7 @@ fitmanyloop: /* Loop if LOOP >= 2 */
fitmanymiddle: /* Loop if LOOP >= 2 */
addib,COND(>) -1, %r31, fitmanymiddle /* Adjusted inner loop decr */
- pitlbe 0(%sr1, %r28)
+ pitlbe %r0(%sr1, %r28)
pitlbe,m %arg1(%sr1, %r28) /* Last pitlbe and addr adjust */
addib,COND(>) -1, %r29, fitmanymiddle /* Middle loop decr */
copy %arg3, %r31 /* Re-init inner loop count */
@@ -139,7 +139,7 @@ fdtmanyloop: /* Loop if LOOP >= 2 */
fdtmanymiddle: /* Loop if LOOP >= 2 */
addib,COND(>) -1, %r31, fdtmanymiddle /* Adjusted inner loop decr */
- pdtlbe 0(%sr1, %r28)
+ pdtlbe %r0(%sr1, %r28)
pdtlbe,m %arg1(%sr1, %r28) /* Last pdtlbe and addr adjust */
addib,COND(>) -1, %r29, fdtmanymiddle /* Middle loop decr */
copy %arg3, %r31 /* Re-init inner loop count */
@@ -620,12 +620,12 @@ ENTRY(copy_user_page_asm)
/* Purge any old translations */
#ifdef CONFIG_PA20
- pdtlb,l 0(%r28)
- pdtlb,l 0(%r29)
+ pdtlb,l %r0(%r28)
+ pdtlb,l %r0(%r29)
#else
tlb_lock %r20,%r21,%r22
- pdtlb 0(%r28)
- pdtlb 0(%r29)
+ pdtlb %r0(%r28)
+ pdtlb %r0(%r29)
tlb_unlock %r20,%r21,%r22
#endif
@@ -768,10 +768,10 @@ ENTRY(clear_user_page_asm)
/* Purge any old translation */
#ifdef CONFIG_PA20
- pdtlb,l 0(%r28)
+ pdtlb,l %r0(%r28)
#else
tlb_lock %r20,%r21,%r22
- pdtlb 0(%r28)
+ pdtlb %r0(%r28)
tlb_unlock %r20,%r21,%r22
#endif
@@ -852,10 +852,10 @@ ENTRY(flush_dcache_page_asm)
/* Purge any old translation */
#ifdef CONFIG_PA20
- pdtlb,l 0(%r28)
+ pdtlb,l %r0(%r28)
#else
tlb_lock %r20,%r21,%r22
- pdtlb 0(%r28)
+ pdtlb %r0(%r28)
tlb_unlock %r20,%r21,%r22
#endif
@@ -892,10 +892,10 @@ ENTRY(flush_dcache_page_asm)
sync
#ifdef CONFIG_PA20
- pdtlb,l 0(%r25)
+ pdtlb,l %r0(%r25)
#else
tlb_lock %r20,%r21,%r22
- pdtlb 0(%r25)
+ pdtlb %r0(%r25)
tlb_unlock %r20,%r21,%r22
#endif
@@ -925,13 +925,18 @@ ENTRY(flush_icache_page_asm)
depwi 0, 31,PAGE_SHIFT, %r28 /* Clear any offset bits */
#endif
- /* Purge any old translation */
+ /* Purge any old translation. Note that the FIC instruction
+ * may use either the instruction or data TLB. Given that we
+ * have a flat address space, it's not clear which TLB will be
+ * used. So, we purge both entries. */
#ifdef CONFIG_PA20
+ pdtlb,l %r0(%r28)
pitlb,l %r0(%sr4,%r28)
#else
tlb_lock %r20,%r21,%r22
- pitlb (%sr4,%r28)
+ pdtlb %r0(%r28)
+ pitlb %r0(%sr4,%r28)
tlb_unlock %r20,%r21,%r22
#endif
@@ -970,10 +975,12 @@ ENTRY(flush_icache_page_asm)
sync
#ifdef CONFIG_PA20
+ pdtlb,l %r0(%r28)
pitlb,l %r0(%sr4,%r25)
#else
tlb_lock %r20,%r21,%r22
- pitlb (%sr4,%r25)
+ pdtlb %r0(%r28)
+ pitlb %r0(%sr4,%r25)
tlb_unlock %r20,%r21,%r22
#endif
Patches currently in stable-queue which might be from dave.anglin@bell.net are
queue-4.4/parisc-fix-race-in-pci-dma.c.patch
queue-4.4/parisc-also-flush-data-tlb-in-flush_icache_page_asm.patch
queue-4.4/parisc-fix-races-in-parisc_setup_cache_timing.patch
reply other threads:[~2016-11-29 15:33 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1480433614199117@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=dave.anglin@bell.net \
--cc=deller@gmx.de \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.