From: Ander Conselvan De Oliveira <conselvan2@gmail.com>
To: ville.syrjala@linux.intel.com, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH] drm/i915: Move the min_pixclk[] handling to the end of readout
Date: Thu, 22 Dec 2016 14:59:36 +0200 [thread overview]
Message-ID: <1482411576.4759.43.camel@gmail.com> (raw)
In-Reply-To: <20161220153902.15621-1-ville.syrjala@linux.intel.com>
On Tue, 2016-12-20 at 17:39 +0200, ville.syrjala@linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Trying to determine the pixel rate of the pipe can't be done until we
> know the clock, which means it can't be done until the encoder
> .get_config() hooks have been called. So let's move the min_pixclk[]
> stuff to the end of intel_modeset_readout_hw_state() when we actually
> have gathered all the required infromation.
>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Mika Kahola <mika.kahola@intel.com>
> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
> Fixes: 565602d7501a ("drm/i915: Do not acquire crtc state to check clock during modeset, v4.")
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 32 ++++++++++++++++----------------
> 1 file changed, 16 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index ef5dde5ab1cf..d8effd4da034 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -17033,7 +17033,6 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
>
> for_each_intel_crtc(dev, crtc) {
> struct intel_crtc_state *crtc_state = crtc->config;
> - int pixclk = 0;
>
> __drm_atomic_helper_crtc_destroy_state(&crtc_state->base);
> memset(crtc_state, 0, sizeof(*crtc_state));
> @@ -17045,23 +17044,9 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
> crtc->base.enabled = crtc_state->base.enable;
> crtc->active = crtc_state->base.active;
>
> - if (crtc_state->base.active) {
> + if (crtc_state->base.active)
> dev_priv->active_crtcs |= 1 << crtc->pipe;
>
> - if (INTEL_GEN(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
> - pixclk = ilk_pipe_pixel_rate(crtc_state);
> - else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> - pixclk = crtc_state->base.adjusted_mode.crtc_clock;
> - else
> - WARN_ON(dev_priv->display.modeset_calc_cdclk);
> -
> - /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
> - if (IS_BROADWELL(dev_priv) && crtc_state->ips_enabled)
> - pixclk = DIV_ROUND_UP(pixclk * 100, 95);
> - }
> -
> - dev_priv->min_pixclk[crtc->pipe] = pixclk;
> -
> readout_plane_state(crtc);
>
> DRM_DEBUG_KMS("[CRTC:%d:%s] hw state readout: %s\n",
> @@ -17134,6 +17119,8 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
> }
>
> for_each_intel_crtc(dev, crtc) {
> + int pixclk = 0;
> +
> crtc->base.hwmode = crtc->config->base.adjusted_mode;
>
> memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
> @@ -17161,10 +17148,23 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
> */
> crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED;
>
> + if (INTEL_GEN(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
> + pixclk = ilk_pipe_pixel_rate(crtc->config);
> + else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> + pixclk = crtc->config->base.adjusted_mode.crtc_clock;
> + else
> + WARN_ON(dev_priv->display.modeset_calc_cdclk);
> +
> + /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
> + if (IS_BROADWELL(dev_priv) && crtc->config->ips_enabled)
> + pixclk = DIV_ROUND_UP(pixclk * 100, 95);
> +
> drm_calc_timestamping_constants(&crtc->base, &crtc->base.hwmode);
> update_scanline_offset(crtc);
> }
>
> + dev_priv->min_pixclk[crtc->pipe] = pixclk;
> +
> intel_pipe_config_sanity_check(dev_priv, crtc->config);
> }
> }
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-12-22 12:59 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-20 15:39 [PATCH] drm/i915: Move the min_pixclk[] handling to the end of readout ville.syrjala
2016-12-20 18:15 ` ✓ Fi.CI.BAT: success for " Patchwork
2016-12-22 12:59 ` Ander Conselvan De Oliveira [this message]
2016-12-22 13:10 ` [PATCH] " Maarten Lankhorst
2016-12-22 14:07 ` Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1482411576.4759.43.camel@gmail.com \
--to=conselvan2@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.