From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: <lee.jones@linaro.org>
Cc: <patches@opensource.wolfsonmicro.com>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 3/4] mfd: arizona: Update arizona_poll_reg to take a timeout in milliseconds
Date: Fri, 6 Jan 2017 14:11:35 +0000 [thread overview]
Message-ID: <1483711896-29268-3-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1483711896-29268-1-git-send-email-ckeepax@opensource.wolfsonmicro.com>
Currently, we specify the timeout in terms of the number of polls but it
is more clear from a user of the functions perspective to specify the
timeout directly in milliseconds, as such update the function to these new
semantics.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
drivers/mfd/arizona-core.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 4cb34c3..1307294 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -235,14 +235,18 @@ static irqreturn_t arizona_overclocked(int irq, void *data)
return IRQ_HANDLED;
}
+#define ARIZONA_REG_POLL_DELAY_MS 5
+
static int arizona_poll_reg(struct arizona *arizona,
- int timeout, unsigned int reg,
+ int timeout_ms, unsigned int reg,
unsigned int mask, unsigned int target)
{
+ unsigned int npolls = (timeout_ms + ARIZONA_REG_POLL_DELAY_MS - 1) /
+ ARIZONA_REG_POLL_DELAY_MS;
unsigned int val = 0;
int ret, i;
- for (i = 0; i < timeout; i++) {
+ for (i = 0; i < npolls; i++) {
ret = regmap_read(arizona->regmap, reg, &val);
if (ret != 0) {
dev_err(arizona->dev, "Failed to read reg 0x%x: %d\n",
@@ -253,7 +257,8 @@ static int arizona_poll_reg(struct arizona *arizona,
if ((val & mask) == target)
return 0;
- usleep_range(1000, 5000);
+ usleep_range((ARIZONA_REG_POLL_DELAY_MS * 1000) / 2,
+ ARIZONA_REG_POLL_DELAY_MS);
}
dev_err(arizona->dev, "Polling reg 0x%x timed out: %x\n", reg, val);
@@ -269,7 +274,7 @@ static int arizona_wait_for_boot(struct arizona *arizona)
* we won't race with the interrupt handler as it'll be blocked on
* runtime resume.
*/
- ret = arizona_poll_reg(arizona, 5, ARIZONA_INTERRUPT_RAW_STATUS_5,
+ ret = arizona_poll_reg(arizona, 25, ARIZONA_INTERRUPT_RAW_STATUS_5,
ARIZONA_BOOT_DONE_STS, ARIZONA_BOOT_DONE_STS);
if (!ret)
@@ -339,7 +344,7 @@ static int arizona_enable_freerun_sysclk(struct arizona *arizona,
ret);
return ret;
}
- ret = arizona_poll_reg(arizona, 25, ARIZONA_INTERRUPT_RAW_STATUS_5,
+ ret = arizona_poll_reg(arizona, 125, ARIZONA_INTERRUPT_RAW_STATUS_5,
ARIZONA_FLL1_CLOCK_OK_STS,
ARIZONA_FLL1_CLOCK_OK_STS);
if (ret)
@@ -403,7 +408,7 @@ static int wm5102_apply_hardware_patch(struct arizona *arizona)
goto err;
}
- ret = arizona_poll_reg(arizona, 5, ARIZONA_WRITE_SEQUENCER_CTRL_1,
+ ret = arizona_poll_reg(arizona, 25, ARIZONA_WRITE_SEQUENCER_CTRL_1,
ARIZONA_WSEQ_BUSY, 0);
if (ret)
regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_0,
--
2.1.4
next prev parent reply other threads:[~2017-01-06 14:12 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-06 14:11 [PATCH 1/4] mfd: arizona: Remove duplicate set of ret variable Charles Keepax
2017-01-06 14:11 ` [PATCH 2/4] mfd: arizona: Display register addresses in hex Charles Keepax
2017-01-06 14:11 ` Charles Keepax [this message]
2017-01-06 14:19 ` [PATCH 3/4] mfd: arizona: Update arizona_poll_reg to take a timeout in milliseconds Charles Keepax
2017-01-06 14:11 ` [PATCH v2 4/4] mfd: arizona: Use regmap_read_poll_timeout instead of hard coding it Charles Keepax
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1483711896-29268-3-git-send-email-ckeepax@opensource.wolfsonmicro.com \
--to=ckeepax@opensource.wolfsonmicro.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.