Patch "ARM: dts: sun7i: bananapi-m1-plus: Enable USB PHY for USB host support" has been added to the 4.9-stable tree

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    ARM: dts: sun7i: bananapi-m1-plus: Enable USB PHY for USB host support

to the 4.9-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     arm-dts-sun7i-bananapi-m1-plus-enable-usb-phy-for-usb-host-support.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 0cff18cbab4f55581d9da86e4286655d9723d7d2 Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@csie.org>
Date: Tue, 15 Nov 2016 21:51:04 +0800
Subject: ARM: dts: sun7i: bananapi-m1-plus: Enable USB PHY for USB host support

From: Chen-Yu Tsai <wens@csie.org>

commit 0cff18cbab4f55581d9da86e4286655d9723d7d2 upstream.

The 2 USB host ports are directly tied to the 2 USB hosts in the SoC.
The 2 host pairs were already enabled, but the USB PHY wasn't.
VBUS on the 2 ports are always on.

Enable the USB PHY.

Fixes: 04c85ecad32a ("ARM: dts: sun7i: Add dts file for Bananapi M1 Plus
		      board")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts |    5 +++++
 1 file changed, 5 insertions(+)

--- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -227,3 +227,8 @@
 	pinctrl-0 = <&uart0_pins_a>;
 	status = "okay";
 };
+
+&usbphy {
+	/* VBUS on usb host ports are tied to DC5V and therefore always on */
+	status = "okay";
+};


Patches currently in stable-queue which might be from wens@csie.org are

queue-4.9/arm-dts-sun7i-bananapi-m1-plus-enable-usb-phy-for-usb-host-support.patch