Patch "PCI: Support INTx masking on ConnectX-4 with firmware x.14.1100+" has been added to the 4.9-stable tree

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    PCI: Support INTx masking on ConnectX-4 with firmware x.14.1100+

to the 4.9-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     pci-support-intx-masking-on-connectx-4-with-firmware-x.14.1100.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 1600f62534b7b3da7978b43b52231a54c24df287 Mon Sep 17 00:00:00 2001
From: Noa Osherovich <noaos@mellanox.com>
Date: Tue, 15 Nov 2016 10:00:00 +0200
Subject: PCI: Support INTx masking on ConnectX-4 with firmware x.14.1100+

From: Noa Osherovich <noaos@mellanox.com>

commit 1600f62534b7b3da7978b43b52231a54c24df287 upstream.

Mellanox devices were marked as having INTx masking ability broken.  As a
result, the VFIO driver fails to start when more than one device function
is passed-through to a VM if both have the same INTx pin.

Prior to Connect-IB, Mellanox devices exposed to the operating system one
PCI function per all ports.  Starting from Connect-IB, the devices are
function-per-port.  When passing the second function to a VM, VFIO will
fail to start.

Exclude ConnectX-4, ConnectX4-Lx and Connect-IB from the list of Mellanox
devices marked as having broken INTx masking:

- ConnectX-4 and ConnectX4-LX firmware version is checked. If INTx
  masking is supported, we unmark the broken INTx masking.
- Connect-IB does not support INTx currently so will not cause any
  problem.

[bhelgaas: call pci_disable_device() always, after iounmap()]
Fixes: 11e42532ada3 ("PCI: Assume all Mellanox devices have broken INTx masking")
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/quirks.c |   59 ++++++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 56 insertions(+), 3 deletions(-)

--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3209,13 +3209,25 @@ static u16 mellanox_broken_intx_devs[] =
 	PCI_DEVICE_ID_MELLANOX_CONNECTX2,
 	PCI_DEVICE_ID_MELLANOX_CONNECTX3,
 	PCI_DEVICE_ID_MELLANOX_CONNECTX3_PRO,
-	PCI_DEVICE_ID_MELLANOX_CONNECTIB,
-	PCI_DEVICE_ID_MELLANOX_CONNECTX4,
-	PCI_DEVICE_ID_MELLANOX_CONNECTX4_LX,
 };
 
+#define CONNECTX_4_CURR_MAX_MINOR 99
+#define CONNECTX_4_INTX_SUPPORT_MINOR 14
+
+/*
+ * Check ConnectX-4/LX FW version to see if it supports legacy interrupts.
+ * If so, don't mark it as broken.
+ * FW minor > 99 means older FW version format and no INTx masking support.
+ * FW minor < 14 means new FW version format and no INTx masking support.
+ */
 static void mellanox_check_broken_intx_masking(struct pci_dev *pdev)
 {
+	__be32 __iomem *fw_ver;
+	u16 fw_major;
+	u16 fw_minor;
+	u16 fw_subminor;
+	u32 fw_maj_min;
+	u32 fw_sub_min;
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(mellanox_broken_intx_devs); i++) {
@@ -3224,6 +3236,47 @@ static void mellanox_check_broken_intx_m
 			return;
 		}
 	}
+
+	/* Getting here means Connect-IB cards and up. Connect-IB has no INTx
+	 * support so shouldn't be checked further
+	 */
+	if (pdev->device == PCI_DEVICE_ID_MELLANOX_CONNECTIB)
+		return;
+
+	if (pdev->device != PCI_DEVICE_ID_MELLANOX_CONNECTX4 &&
+	    pdev->device != PCI_DEVICE_ID_MELLANOX_CONNECTX4_LX)
+		return;
+
+	/* For ConnectX-4 and ConnectX-4LX, need to check FW support */
+	if (pci_enable_device_mem(pdev)) {
+		dev_warn(&pdev->dev, "Can't enable device memory\n");
+		return;
+	}
+
+	fw_ver = ioremap(pci_resource_start(pdev, 0), 4);
+	if (!fw_ver) {
+		dev_warn(&pdev->dev, "Can't map ConnectX-4 initialization segment\n");
+		goto out;
+	}
+
+	/* Reading from resource space should be 32b aligned */
+	fw_maj_min = ioread32be(fw_ver);
+	fw_sub_min = ioread32be(fw_ver + 1);
+	fw_major = fw_maj_min & 0xffff;
+	fw_minor = fw_maj_min >> 16;
+	fw_subminor = fw_sub_min & 0xffff;
+	if (fw_minor > CONNECTX_4_CURR_MAX_MINOR ||
+	    fw_minor < CONNECTX_4_INTX_SUPPORT_MINOR) {
+		dev_warn(&pdev->dev, "ConnectX-4: FW %u.%u.%u doesn't support INTx masking, disabling. Please upgrade FW to %d.14.1100 and up for INTx support\n",
+			 fw_major, fw_minor, fw_subminor, pdev->device ==
+			 PCI_DEVICE_ID_MELLANOX_CONNECTX4 ? 12 : 14);
+		pdev->broken_intx_masking = 1;
+	}
+
+	iounmap(fw_ver);
+
+out:
+	pci_disable_device(pdev);
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_ANY_ID,
 			mellanox_check_broken_intx_masking);


Patches currently in stable-queue which might be from noaos@mellanox.com are

queue-4.9/pci-convert-broken-intx-masking-quirks-from-header-to-final.patch
queue-4.9/pci-convert-mellanox-broken-intx-quirks-to-be-for-listed-devices-only.patch
queue-4.9/pci-add-mellanox-device-ids.patch
queue-4.9/pci-support-intx-masking-on-connectx-4-with-firmware-x.14.1100.patch