From: <gregkh@linuxfoundation.org>
To: b-liu@ti.com, gregkh@linuxfoundation.org, tony@atomide.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "usb: musb: fix runtime PM in debugfs" has been added to the 4.9-stable tree
Date: Tue, 17 Jan 2017 14:05:08 +0100 [thread overview]
Message-ID: <1484658308245132@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
usb: musb: fix runtime PM in debugfs
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
usb-musb-fix-runtime-pm-in-debugfs.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 7b6c1b4c0e1e44544aa18161dba6a741c080a7ef Mon Sep 17 00:00:00 2001
From: Bin Liu <b-liu@ti.com>
Date: Tue, 10 Jan 2017 10:46:00 -0600
Subject: usb: musb: fix runtime PM in debugfs
From: Bin Liu <b-liu@ti.com>
commit 7b6c1b4c0e1e44544aa18161dba6a741c080a7ef upstream.
MUSB driver now has runtime PM support, but the debugfs driver misses
the PM _get/_put() calls, which could cause MUSB register access
failure.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/musb/musb_debugfs.c | 20 +++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -114,6 +114,7 @@ static int musb_regdump_show(struct seq_
unsigned i;
seq_printf(s, "MUSB (M)HDRC Register Dump\n");
+ pm_runtime_get_sync(musb->controller);
for (i = 0; i < ARRAY_SIZE(musb_regmap); i++) {
switch (musb_regmap[i].size) {
@@ -132,6 +133,8 @@ static int musb_regdump_show(struct seq_
}
}
+ pm_runtime_mark_last_busy(musb->controller);
+ pm_runtime_put_autosuspend(musb->controller);
return 0;
}
@@ -145,7 +148,10 @@ static int musb_test_mode_show(struct se
struct musb *musb = s->private;
unsigned test;
+ pm_runtime_get_sync(musb->controller);
test = musb_readb(musb->mregs, MUSB_TESTMODE);
+ pm_runtime_mark_last_busy(musb->controller);
+ pm_runtime_put_autosuspend(musb->controller);
if (test & MUSB_TEST_FORCE_HOST)
seq_printf(s, "force host\n");
@@ -194,11 +200,12 @@ static ssize_t musb_test_mode_write(stru
u8 test;
char buf[18];
+ pm_runtime_get_sync(musb->controller);
test = musb_readb(musb->mregs, MUSB_TESTMODE);
if (test) {
dev_err(musb->controller, "Error: test mode is already set. "
"Please do USB Bus Reset to start a new test.\n");
- return count;
+ goto ret;
}
memset(buf, 0x00, sizeof(buf));
@@ -234,6 +241,9 @@ static ssize_t musb_test_mode_write(stru
musb_writeb(musb->mregs, MUSB_TESTMODE, test);
+ret:
+ pm_runtime_mark_last_busy(musb->controller);
+ pm_runtime_put_autosuspend(musb->controller);
return count;
}
@@ -254,8 +264,13 @@ static int musb_softconnect_show(struct
switch (musb->xceiv->otg->state) {
case OTG_STATE_A_HOST:
case OTG_STATE_A_WAIT_BCON:
+ pm_runtime_get_sync(musb->controller);
+
reg = musb_readb(musb->mregs, MUSB_DEVCTL);
connect = reg & MUSB_DEVCTL_SESSION ? 1 : 0;
+
+ pm_runtime_mark_last_busy(musb->controller);
+ pm_runtime_put_autosuspend(musb->controller);
break;
default:
connect = -1;
@@ -284,6 +299,7 @@ static ssize_t musb_softconnect_write(st
if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
return -EFAULT;
+ pm_runtime_get_sync(musb->controller);
if (!strncmp(buf, "0", 1)) {
switch (musb->xceiv->otg->state) {
case OTG_STATE_A_HOST:
@@ -314,6 +330,8 @@ static ssize_t musb_softconnect_write(st
}
}
+ pm_runtime_mark_last_busy(musb->controller);
+ pm_runtime_put_autosuspend(musb->controller);
return count;
}
Patches currently in stable-queue which might be from b-liu@ti.com are
queue-4.9/usb-musb-fix-runtime-pm-in-debugfs.patch
reply other threads:[~2017-01-17 13:06 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1484658308245132@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=b-liu@ti.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.