All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: johan@kernel.org, gregkh@linuxfoundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "USB: serial: ch341: fix modem-control and B0 handling" has been added to the 4.4-stable tree
Date: Tue, 17 Jan 2017 17:11:40 +0100	[thread overview]
Message-ID: <148466950022079@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    USB: serial: ch341: fix modem-control and B0 handling

to the 4.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     usb-serial-ch341-fix-modem-control-and-b0-handling.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 030ee7ae52a46a2be52ccc8242c4a330aba8d38e Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Fri, 6 Jan 2017 19:15:12 +0100
Subject: USB: serial: ch341: fix modem-control and B0 handling

From: Johan Hovold <johan@kernel.org>

commit 030ee7ae52a46a2be52ccc8242c4a330aba8d38e upstream.

The modem-control signals are managed by the tty-layer during open and
should not be asserted prematurely when set_termios is called from
driver open.

Also make sure that the signals are asserted only when changing speed
from B0.

Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ch341.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -362,24 +362,24 @@ static void ch341_set_termios(struct tty
 	baud_rate = tty_get_baud_rate(tty);
 
 	if (baud_rate) {
-		spin_lock_irqsave(&priv->lock, flags);
-		priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
-		spin_unlock_irqrestore(&priv->lock, flags);
 		priv->baud_rate = baud_rate;
 		ch341_set_baudrate(port->serial->dev, priv);
-	} else {
-		spin_lock_irqsave(&priv->lock, flags);
-		priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS);
-		spin_unlock_irqrestore(&priv->lock, flags);
 	}
 
-	ch341_set_handshake(port->serial->dev, priv->line_control);
-
 	/* Unimplemented:
 	 * (cflag & CSIZE) : data bits [5, 8]
 	 * (cflag & PARENB) : parity {NONE, EVEN, ODD}
 	 * (cflag & CSTOPB) : stop bits [1, 2]
 	 */
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (C_BAUD(tty) == B0)
+		priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS);
+	else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
+		priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	ch341_set_handshake(port->serial->dev, priv->line_control);
 }
 
 static void ch341_break_ctl(struct tty_struct *tty, int break_state)


Patches currently in stable-queue which might be from johan@kernel.org are

queue-4.4/usb-serial-ch341-fix-modem-control-and-b0-handling.patch
queue-4.4/powerpc-ibmebus-fix-further-device-reference-leaks.patch
queue-4.4/usb-serial-ch341-fix-control-message-error-handling.patch
queue-4.4/usb-serial-ch341-fix-open-and-resume-after-b0.patch
queue-4.4/usb-serial-ch341-fix-open-error-handling.patch
queue-4.4/usb-serial-ch341-fix-initial-modem-control-state.patch
queue-4.4/bus-vexpress-config-fix-device-reference-leak.patch
queue-4.4/powerpc-ibmebus-fix-device-reference-leaks-in-sysfs-interface.patch
queue-4.4/usb-serial-kl5kusb105-fix-line-state-error-handling.patch
queue-4.4/usb-serial-ch341-fix-resume-after-reset.patch

                 reply	other threads:[~2017-01-17 16:13 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=148466950022079@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=johan@kernel.org \
    --cc=stable-commits@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.