From: jbrunet@baylibre.com (Jerome Brunet)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 0/5] meson-gx: reset RGMII PHYs and configure TX delay
Date: Thu, 19 Jan 2017 10:47:47 +0100 [thread overview]
Message-ID: <1484819267.26620.75.camel@baylibre.com> (raw)
In-Reply-To: <CAFBinCACbeZPRXQO4OA5mJdGRvMkQoUmQEAKCi8KU2ZvrspF6A@mail.gmail.com>
On Wed, 2017-01-18 at 20:40 +0100, Martin Blumenstingl wrote:
> Kevin,
>
> On Wed, Jan 18, 2017 at 8:28 PM, Kevin Hilman <khilman@baylibre.com>
> wrote:
> >
> > Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes:
> >
> > >
> > > This partially fixes the 1000Mbit/s ethernet TX throughput issues
> > > (on
> > > networks which are not affected by the EEE problem, as reported
> > > here:
> >
> > Based on the discussions with Jerome, I'm dropping this series from
> > the
> > v4.11/dt64 branch for now.
> what is you opinion on having the MDIO node in meson-gx (and keeping
> GXBB and GXL/GXM consistent) vs not having PHY autodetection for GXBB
> (= not having the MDIO in meson-gx)?
> I cannot send a v2 until we have a decision for this
>
> >
> > This series also had a small conflict with Jerome's fix[1] for the
> > odroid-c2, so please rebase any updates here on my v4.10/fixes
> > branch.
> will keep that in mind, noted.
Most this patch can go away with your patch.
Just make sure to keep "eee-broken-1000t;" in the odroidc2 dtsi and
it'll be OK.
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: jbrunet@baylibre.com (Jerome Brunet)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/5] meson-gx: reset RGMII PHYs and configure TX delay
Date: Thu, 19 Jan 2017 10:47:47 +0100 [thread overview]
Message-ID: <1484819267.26620.75.camel@baylibre.com> (raw)
In-Reply-To: <CAFBinCACbeZPRXQO4OA5mJdGRvMkQoUmQEAKCi8KU2ZvrspF6A@mail.gmail.com>
On Wed, 2017-01-18 at 20:40 +0100, Martin Blumenstingl wrote:
> Kevin,
>
> On Wed, Jan 18, 2017 at 8:28 PM, Kevin Hilman <khilman@baylibre.com>
> wrote:
> >
> > Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes:
> >
> > >
> > > This partially fixes the 1000Mbit/s ethernet TX throughput issues
> > > (on
> > > networks which are not affected by the EEE problem, as reported
> > > here:
> >
> > Based on the discussions with Jerome, I'm dropping this series from
> > the
> > v4.11/dt64 branch for now.
> what is you opinion on having the MDIO node in meson-gx (and keeping
> GXBB and GXL/GXM consistent) vs not having PHY autodetection for GXBB
> (= not having the MDIO in meson-gx)?
> I cannot send a v2 until we have a decision for this
>
> >
> > This series also had a small conflict with Jerome's fix[1] for the
> > odroid-c2, so please rebase any updates here on my v4.10/fixes
> > branch.
> will keep that in mind, noted.
Most this patch can go away with your patch.
Just make sure to keep "eee-broken-1000t;" in the odroidc2 dtsi and
it'll be OK.
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Jerome Brunet <jbrunet@baylibre.com>
To: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Kevin Hilman <khilman@baylibre.com>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
catalin.marinas@arm.com, will.deacon@arm.com, robh+dt@kernel.org,
carlo@caione.org, linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 0/5] meson-gx: reset RGMII PHYs and configure TX delay
Date: Thu, 19 Jan 2017 10:47:47 +0100 [thread overview]
Message-ID: <1484819267.26620.75.camel@baylibre.com> (raw)
In-Reply-To: <CAFBinCACbeZPRXQO4OA5mJdGRvMkQoUmQEAKCi8KU2ZvrspF6A@mail.gmail.com>
On Wed, 2017-01-18 at 20:40 +0100, Martin Blumenstingl wrote:
> Kevin,
>
> On Wed, Jan 18, 2017 at 8:28 PM, Kevin Hilman <khilman@baylibre.com>
> wrote:
> >
> > Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes:
> >
> > >
> > > This partially fixes the 1000Mbit/s ethernet TX throughput issues
> > > (on
> > > networks which are not affected by the EEE problem, as reported
> > > here:
> >
> > Based on the discussions with Jerome, I'm dropping this series from
> > the
> > v4.11/dt64 branch for now.
> what is you opinion on having the MDIO node in meson-gx (and keeping
> GXBB and GXL/GXM consistent) vs not having PHY autodetection for GXBB
> (= not having the MDIO in meson-gx)?
> I cannot send a v2 until we have a decision for this
>
> >
> > This series also had a small conflict with Jerome's fix[1] for the
> > odroid-c2, so please rebase any updates here on my v4.10/fixes
> > branch.
> will keep that in mind, noted.
Most this patch can go away with your patch.
Just make sure to keep "eee-broken-1000t;" in the odroidc2 dtsi and
it'll be OK.
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2017-01-19 9:47 UTC|newest]
Thread overview: 234+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-02 23:47 [PATCH 0/5] meson-gx: reset RGMII PHYs and configure TX delay Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 1/5] ARM64: dts: meson-gx: move the MDIO node to meson-gx Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 2/5] ARM64: dts: meson-gxbb-odroidc2: add reset for the ethernet PHY Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 3/5] ARM64: dts: meson-gxbb-p20x: " Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2017-01-17 19:22 ` Jerome Brunet
2017-01-17 19:22 ` Jerome Brunet
2017-01-17 19:22 ` Jerome Brunet
2017-01-17 21:26 ` Martin Blumenstingl
2017-01-17 21:26 ` Martin Blumenstingl
2017-01-17 21:26 ` Martin Blumenstingl
2017-01-18 10:36 ` Jerome Brunet
2017-01-18 10:36 ` Jerome Brunet
2017-01-18 10:36 ` Jerome Brunet
2017-01-18 14:26 ` Martin Blumenstingl
2017-01-18 14:26 ` Martin Blumenstingl
2017-01-18 14:26 ` Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 4/5] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 5/5] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-17 20:36 ` [PATCH 0/5] meson-gx: reset RGMII PHYs and configure TX delay Martin Blumenstingl
2016-12-17 20:36 ` Martin Blumenstingl
2016-12-17 20:36 ` Martin Blumenstingl
2017-01-09 22:52 ` Kevin Hilman
2017-01-09 22:52 ` Kevin Hilman
2017-01-09 22:52 ` Kevin Hilman
2017-01-17 19:23 ` Jerome Brunet
2017-01-17 19:23 ` Jerome Brunet
2017-01-17 19:23 ` Jerome Brunet
2017-01-17 21:09 ` Martin Blumenstingl
2017-01-17 21:09 ` Martin Blumenstingl
2017-01-17 21:09 ` Martin Blumenstingl
2017-01-17 22:26 ` Jerome Brunet
2017-01-17 22:26 ` Jerome Brunet
2017-01-17 22:26 ` Jerome Brunet
2017-01-17 22:44 ` Martin Blumenstingl
2017-01-17 22:44 ` Martin Blumenstingl
2017-01-17 22:44 ` Martin Blumenstingl
2017-01-18 19:28 ` Kevin Hilman
2017-01-18 19:28 ` Kevin Hilman
2017-01-18 19:28 ` Kevin Hilman
2017-01-18 19:40 ` Martin Blumenstingl
2017-01-18 19:40 ` Martin Blumenstingl
2017-01-18 19:40 ` Martin Blumenstingl
2017-01-19 9:47 ` Jerome Brunet [this message]
2017-01-19 9:47 ` Jerome Brunet
2017-01-19 9:47 ` Jerome Brunet
2017-01-20 13:26 ` [PATCH v2 0/9] " Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 2/9] ARM64: dts: meson-gxbb-p201: " Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:31 ` Neil Armstrong
2017-01-20 13:31 ` Neil Armstrong
2017-01-20 13:31 ` Neil Armstrong
2017-01-20 13:33 ` Martin Blumenstingl
2017-01-20 13:33 ` Martin Blumenstingl
2017-01-20 13:33 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 3/9] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: " Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 5/9] ARM64: dts: meson-gxbb-wetek-hub: " Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 6/9] ARM64: dts: meson-gxbb-wetek-play2: " Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 7/9] ARM64: dts: meson-gxbb-p20x: remove the ethernet node Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 15:22 ` [PATCH v3 0/9] meson-gx: reset RGMII PHYs and configure TX delay Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` [PATCH v3 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 15:22 ` [PATCH v3 2/9] ARM64: dts: meson-gxbb-p200: " Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 16:18 ` Andrew Lunn
2017-01-20 16:18 ` Andrew Lunn
2017-01-20 16:18 ` Andrew Lunn
2017-01-20 16:21 ` Andrew Lunn
2017-01-20 16:21 ` Andrew Lunn
2017-01-20 16:21 ` Andrew Lunn
2017-01-20 17:07 ` Martin Blumenstingl
2017-01-20 17:07 ` Martin Blumenstingl
2017-01-20 17:07 ` Martin Blumenstingl
2017-01-20 17:46 ` Andrew Lunn
2017-01-20 17:46 ` Andrew Lunn
2017-01-20 17:46 ` Andrew Lunn
2017-01-22 16:48 ` Martin Blumenstingl
2017-01-22 16:48 ` Martin Blumenstingl
2017-01-22 16:48 ` Martin Blumenstingl
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 15:22 ` [PATCH v3 3/9] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` [PATCH v3 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: " Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 15:22 ` [PATCH v3 5/9] ARM64: dts: meson-gxbb-wetek-hub: " Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` [PATCH v3 6/9] ARM64: dts: meson-gxbb-wetek-play2: " Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 15:22 ` [PATCH v3 7/9] ARM64: dts: meson-gxbb-p201: fix ethernet support Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` [PATCH v3 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 16:34 ` Neil Armstrong
2017-01-20 16:34 ` Neil Armstrong
2017-01-20 16:34 ` Neil Armstrong
2017-01-20 15:22 ` [PATCH v3 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:27 ` [PATCH v3 0/9] meson-gx: reset RGMII PHYs and configure TX delay Jerome Brunet
2017-01-20 15:27 ` Jerome Brunet
2017-01-20 15:27 ` Jerome Brunet
2017-01-20 15:32 ` Martin Blumenstingl
2017-01-20 15:32 ` Martin Blumenstingl
2017-01-20 15:32 ` Martin Blumenstingl
2017-01-20 19:46 ` Kevin Hilman
2017-01-20 19:46 ` Kevin Hilman
2017-01-20 19:46 ` Kevin Hilman
2017-01-22 18:10 ` [PATCH v4 " Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 2/9] ARM64: dts: meson-gxbb-p200: " Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 3/9] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: " Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 5/9] ARM64: dts: meson-gxbb-wetek-hub: " Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 6/9] ARM64: dts: meson-gxbb-wetek-play2: " Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 7/9] ARM64: dts: meson-gxbb-p201: fix ethernet support Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-23 18:55 ` [PATCH v4 0/9] meson-gx: reset RGMII PHYs and configure TX delay Kevin Hilman
2017-01-23 18:55 ` Kevin Hilman
2017-01-23 18:55 ` Kevin Hilman
2017-01-23 19:02 ` Martin Blumenstingl
2017-01-23 19:02 ` Martin Blumenstingl
2017-01-23 19:02 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 " Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 2/9] ARM64: dts: meson-gxbb-p200: " Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 3/9] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: " Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 5/9] ARM64: dts: meson-gxbb-wetek-hub: " Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 6/9] ARM64: dts: meson-gxbb-wetek-play2: " Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 7/9] ARM64: dts: meson-gxbb-p201: fix ethernet support Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-20 9:08 ` [PATCH v5 0/9] meson-gx: reset RGMII PHYs and configure TX delay Jerome Brunet
2017-02-20 9:08 ` Jerome Brunet
2017-02-20 9:08 ` Jerome Brunet
2017-03-02 17:02 ` Kevin Hilman
2017-03-02 17:02 ` Kevin Hilman
2017-03-02 17:02 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1484819267.26620.75.camel@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.