diff for duplicates of <1485123764-14754-5-git-send-email-mhei@heimpold.de> diff --git a/a/1.txt b/N1/1.txt index 7e01ecf..3ea5a41 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -5,7 +5,7 @@ While at tweak some more settings for the default product: - get rid of regulators simple-bus container - adjust phy reset duration -Signed-off-by: Michael Heimpold <mhei@heimpold.de> +Signed-off-by: Michael Heimpold <mhei-Z/Lg1yOAjpkb1SvskN2V4Q@public.gmane.org> --- arch/arm/boot/dts/imx28-duckbill.dts | 81 +++++++++++++++++++++++++----------- 1 file changed, 56 insertions(+), 25 deletions(-) @@ -16,9 +16,9 @@ index ce1a7ef..3e4385d 100644 +++ b/arch/arm/boot/dts/imx28-duckbill.dts @@ -1,5 +1,6 @@ /* -- * Copyright (C) 2013 Michael Heimpold <mhei@heimpold.de> -+ * Copyright (C) 2013-2014,2016 Michael Heimpold <mhei@heimpold.de> -+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com> +- * Copyright (C) 2013 Michael Heimpold <mhei-Z/Lg1yOAjpkb1SvskN2V4Q@public.gmane.org> ++ * Copyright (C) 2013-2014,2016 Michael Heimpold <mhei-Z/Lg1yOAjpkb1SvskN2V4Q@public.gmane.org> ++ * Copyright (C) 2015-2017 I2SE GmbH <info-eS4NqCHxEME@public.gmane.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License @@ -34,18 +34,18 @@ index ce1a7ef..3e4385d 100644 status = "okay"; }; -+ ssp2: ssp at 80014000 { ++ ssp2: ssp@80014000 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + }; + - pinctrl at 80018000 { + pinctrl@80018000 { pinctrl-names = "default"; pinctrl-0 = <&hog_pins_a>; @@ -39,14 +48,24 @@ - hog_pins_a: hog at 0 { + hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < - MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */ @@ -56,7 +56,7 @@ index ce1a7ef..3e4385d 100644 + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + -+ mac0_phy_reset_pin: mac0-phy-reset at 0 { ++ mac0_phy_reset_pin: mac0-phy-reset@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */ @@ -66,16 +66,16 @@ index ce1a7ef..3e4385d 100644 fsl,pull-up = <MXS_PULL_DISABLE>; }; -- led_pins_a: led_gpio at 0 { -+ led_pins: leds at 0 { +- led_pins_a: led_gpio@0 { ++ led_pins: leds@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_AUART1_RX__GPIO_3_4 @@ -60,6 +79,22 @@ }; - apbx at 80040000 { -+ lradc at 80050000 { + apbx@80040000 { ++ lradc@80050000 { + status = "okay"; + }; + @@ -85,23 +85,23 @@ index ce1a7ef..3e4385d 100644 + status = "okay"; + }; + -+ auart0: serial at 8006a000 { ++ auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; + }; + - duart: serial at 80074000 { + duart: serial@80074000 { pinctrl-names = "default"; pinctrl-0 = <&duart_pins_a>; @@ -75,47 +110,43 @@ - ahb at 80080000 { - usb0: usb at 80080000 { + ahb@80080000 { + usb0: usb@80080000 { status = "okay"; + dr_mode = "peripheral"; }; - mac0: ethernet at 800f0000 { + mac0: ethernet@800f0000 { phy-mode = "rmii"; pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; @@ -119,7 +119,7 @@ index ce1a7ef..3e4385d 100644 - #address-cells = <1>; - #size-cells = <0>; - -- reg_3p3v: regulator at 0 { +- reg_3p3v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "3P3V"; @@ -162,3 +162,8 @@ index ce1a7ef..3e4385d 100644 }; -- 2.7.4 + +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index e0d634b..758d640 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,8 +1,16 @@ "ref\01485123764-14754-1-git-send-email-mhei@heimpold.de\0" - "From\0mhei@heimpold.de (Michael Heimpold)\0" + "ref\01485123764-14754-1-git-send-email-mhei-Z/Lg1yOAjpkb1SvskN2V4Q@public.gmane.org\0" + "From\0Michael Heimpold <mhei-Z/Lg1yOAjpkb1SvskN2V4Q@public.gmane.org>\0" "Subject\0[PATCH v2 4/9] ARM: dts: imx28-duckbill: enable spi, i2c and uart pins\0" "Date\0Sun, 22 Jan 2017 23:22:39 +0100\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org" + kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org + robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org + " mark.rutland-5wv7dgnIgG8@public.gmane.org\0" + "Cc\0linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org" + devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + stefan.wahren-eS4NqCHxEME@public.gmane.org + " Michael Heimpold <mhei-Z/Lg1yOAjpkb1SvskN2V4Q@public.gmane.org>\0" "\00:1\0" "b\0" "While at tweak some more settings for the default product:\n" @@ -12,7 +20,7 @@ "- get rid of regulators simple-bus container\n" "- adjust phy reset duration\n" "\n" - "Signed-off-by: Michael Heimpold <mhei@heimpold.de>\n" + "Signed-off-by: Michael Heimpold <mhei-Z/Lg1yOAjpkb1SvskN2V4Q@public.gmane.org>\n" "---\n" " arch/arm/boot/dts/imx28-duckbill.dts | 81 +++++++++++++++++++++++++-----------\n" " 1 file changed, 56 insertions(+), 25 deletions(-)\n" @@ -23,9 +31,9 @@ "+++ b/arch/arm/boot/dts/imx28-duckbill.dts\n" "@@ -1,5 +1,6 @@\n" " /*\n" - "- * Copyright (C) 2013 Michael Heimpold <mhei@heimpold.de>\n" - "+ * Copyright (C) 2013-2014,2016 Michael Heimpold <mhei@heimpold.de>\n" - "+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>\n" + "- * Copyright (C) 2013 Michael Heimpold <mhei-Z/Lg1yOAjpkb1SvskN2V4Q@public.gmane.org>\n" + "+ * Copyright (C) 2013-2014,2016 Michael Heimpold <mhei-Z/Lg1yOAjpkb1SvskN2V4Q@public.gmane.org>\n" + "+ * Copyright (C) 2015-2017 I2SE GmbH <info-eS4NqCHxEME@public.gmane.org>\n" " *\n" " * The code contained herein is licensed under the GNU General Public\n" " * License. You may obtain a copy of the GNU General Public License\n" @@ -41,18 +49,18 @@ " \t\t\t\tstatus = \"okay\";\n" " \t\t\t};\n" " \n" - "+\t\t\tssp2: ssp at 80014000 {\n" + "+\t\t\tssp2: ssp@80014000 {\n" "+\t\t\t\tcompatible = \"fsl,imx28-spi\";\n" "+\t\t\t\tpinctrl-names = \"default\";\n" "+\t\t\t\tpinctrl-0 = <&spi2_pins_a>;\n" "+\t\t\t\tstatus = \"okay\";\n" "+\t\t\t};\n" "+\n" - " \t\t\tpinctrl at 80018000 {\n" + " \t\t\tpinctrl@80018000 {\n" " \t\t\t\tpinctrl-names = \"default\";\n" " \t\t\t\tpinctrl-0 = <&hog_pins_a>;\n" "@@ -39,14 +48,24 @@\n" - " \t\t\t\thog_pins_a: hog at 0 {\n" + " \t\t\t\thog_pins_a: hog@0 {\n" " \t\t\t\t\treg = <0>;\n" " \t\t\t\t\tfsl,pinmux-ids = <\n" "-\t\t\t\t\t\tMX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */\n" @@ -63,7 +71,7 @@ "+\t\t\t\t\tfsl,pull-up = <MXS_PULL_DISABLE>;\n" "+\t\t\t\t};\n" "+\n" - "+\t\t\t\tmac0_phy_reset_pin: mac0-phy-reset at 0 {\n" + "+\t\t\t\tmac0_phy_reset_pin: mac0-phy-reset@0 {\n" "+\t\t\t\t\treg = <0>;\n" "+\t\t\t\t\tfsl,pinmux-ids = <\n" "+\t\t\t\t\t\tMX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */\n" @@ -73,16 +81,16 @@ " \t\t\t\t\tfsl,pull-up = <MXS_PULL_DISABLE>;\n" " \t\t\t\t};\n" " \n" - "-\t\t\t\tled_pins_a: led_gpio at 0 {\n" - "+\t\t\t\tled_pins: leds at 0 {\n" + "-\t\t\t\tled_pins_a: led_gpio@0 {\n" + "+\t\t\t\tled_pins: leds@0 {\n" " \t\t\t\t\treg = <0>;\n" " \t\t\t\t\tfsl,pinmux-ids = <\n" " \t\t\t\t\t\tMX28_PAD_AUART1_RX__GPIO_3_4\n" "@@ -60,6 +79,22 @@\n" " \t\t};\n" " \n" - " \t\tapbx at 80040000 {\n" - "+\t\t\tlradc at 80050000 {\n" + " \t\tapbx@80040000 {\n" + "+\t\t\tlradc@80050000 {\n" "+\t\t\t\tstatus = \"okay\";\n" "+\t\t\t};\n" "+\n" @@ -92,23 +100,23 @@ "+\t\t\t\tstatus = \"okay\";\n" "+\t\t\t};\n" "+\n" - "+\t\t\tauart0: serial at 8006a000 {\n" + "+\t\t\tauart0: serial@8006a000 {\n" "+\t\t\t\tpinctrl-names = \"default\";\n" "+\t\t\t\tpinctrl-0 = <&auart0_2pins_a>;\n" "+\t\t\t\tstatus = \"okay\";\n" "+\t\t\t};\n" "+\n" - " \t\t\tduart: serial at 80074000 {\n" + " \t\t\tduart: serial@80074000 {\n" " \t\t\t\tpinctrl-names = \"default\";\n" " \t\t\t\tpinctrl-0 = <&duart_pins_a>;\n" "@@ -75,47 +110,43 @@\n" - " \tahb at 80080000 {\n" - " \t\tusb0: usb at 80080000 {\n" + " \tahb@80080000 {\n" + " \t\tusb0: usb@80080000 {\n" " \t\t\tstatus = \"okay\";\n" "+\t\t\tdr_mode = \"peripheral\";\n" " \t\t};\n" " \n" - " \t\tmac0: ethernet at 800f0000 {\n" + " \t\tmac0: ethernet@800f0000 {\n" " \t\t\tphy-mode = \"rmii\";\n" " \t\t\tpinctrl-names = \"default\";\n" "-\t\t\tpinctrl-0 = <&mac0_pins_a>;\n" @@ -126,7 +134,7 @@ "-\t\t#address-cells = <1>;\n" "-\t\t#size-cells = <0>;\n" "-\n" - "-\t\treg_3p3v: regulator at 0 {\n" + "-\t\treg_3p3v: regulator@0 {\n" "-\t\t\tcompatible = \"regulator-fixed\";\n" "-\t\t\treg = <0>;\n" "-\t\t\tregulator-name = \"3P3V\";\n" @@ -168,6 +176,11 @@ " \t};\n" " };\n" "-- \n" - 2.7.4 + "2.7.4\n" + "\n" + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -8521211af03d2429d28a67c81b029f456844bc93c5291abfd1b476b8edf59afb +4a5997b015a8b9e19e06b4abed8cc1035d63bf5114473d42c47039e2fd2bfec6
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.