diff for duplicates of <1485123764-14754-6-git-send-email-mhei@heimpold.de> diff --git a/a/1.txt b/N1/1.txt index 39bf3a4..9e5b0ed 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -3,8 +3,8 @@ based on NXP's i.MX28 CPU. In contrast to the previous model "Duckbill", the "Duckbill 2" series has internal eMMC storage. -Signed-off-by: Michael Heimpold <mhei@heimpold.de> -Cc: Stefan Wahren <stefan.wahren@i2se.com> +Signed-off-by: Michael Heimpold <mhei-Z/Lg1yOAjpkb1SvskN2V4Q@public.gmane.org> +Cc: Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx28-duckbill-2.dts | 183 +++++++++++++++++++++++++++++++++ @@ -30,8 +30,8 @@ index 0000000..2510b20 +++ b/arch/arm/boot/dts/imx28-duckbill-2.dts @@ -0,0 +1,183 @@ +/* -+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com> -+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de> ++ * Copyright (C) 2015-2017 I2SE GmbH <info-eS4NqCHxEME@public.gmane.org> ++ * Copyright (C) 2016 Michael Heimpold <mhei-Z/Lg1yOAjpkb1SvskN2V4Q@public.gmane.org> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License @@ -54,9 +54,9 @@ index 0000000..2510b20 + reg = <0x40000000 0x08000000>; + }; + -+ apb at 80000000 { -+ apbh at 80000000 { -+ ssp0: ssp at 80010000 { ++ apb@80000000 { ++ apbh@80000000 { ++ ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a @@ -67,7 +67,7 @@ index 0000000..2510b20 + non-removable; + }; + -+ ssp2: ssp at 80014000 { ++ ssp2: ssp@80014000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_b @@ -77,11 +77,11 @@ index 0000000..2510b20 + status = "okay"; + }; + -+ pinctrl at 80018000 { ++ pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + -+ hog_pins_a: hog at 0 { ++ hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ @@ -91,7 +91,7 @@ index 0000000..2510b20 + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + -+ mac0_phy_reset_pin: mac0-phy-reset at 0 { ++ mac0_phy_reset_pin: mac0-phy-reset@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ @@ -101,7 +101,7 @@ index 0000000..2510b20 + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + -+ mac0_phy_int_pin: mac0-phy-int at 0 { ++ mac0_phy_int_pin: mac0-phy-int@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ @@ -111,7 +111,7 @@ index 0000000..2510b20 + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + -+ led_pins: leds at 0 { ++ led_pins: leds@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SAIF0_MCLK__GPIO_3_20 @@ -124,42 +124,42 @@ index 0000000..2510b20 + }; + }; + -+ apbx at 80040000 { -+ lradc at 80050000 { ++ apbx@80040000 { ++ lradc@80050000 { + status = "okay"; + }; + -+ i2c0: i2c at 80058000 { ++ i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + -+ auart0: serial at 8006a000 { ++ auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; + }; + -+ duart: serial at 80074000 { ++ duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + -+ usbphy0: usbphy at 8007c000 { ++ usbphy0: usbphy@8007c000 { + status = "okay"; + }; + }; + }; + -+ ahb at 80080000 { -+ usb0: usb at 80080000 { ++ ahb@80080000 { ++ usb0: usb@80080000 { + status = "okay"; + dr_mode = "peripheral"; + }; + -+ mac0: ethernet at 800f0000 { ++ mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; @@ -173,7 +173,7 @@ index 0000000..2510b20 + #address-cells = <1>; + #size-cells = <0>; + -+ ethphy: ethernet-phy at 0 { ++ ethphy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; @@ -214,3 +214,8 @@ index 0000000..2510b20 +}; -- 2.7.4 + +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index 7f61343..b47447f 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,8 +1,16 @@ "ref\01485123764-14754-1-git-send-email-mhei@heimpold.de\0" - "From\0mhei@heimpold.de (Michael Heimpold)\0" + "ref\01485123764-14754-1-git-send-email-mhei-Z/Lg1yOAjpkb1SvskN2V4Q@public.gmane.org\0" + "From\0Michael Heimpold <mhei-Z/Lg1yOAjpkb1SvskN2V4Q@public.gmane.org>\0" "Subject\0[PATCH v2 5/9] ARM: dts: add support for I2SE Duckbill 2 boards\0" "Date\0Sun, 22 Jan 2017 23:22:40 +0100\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org" + kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org + robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org + " mark.rutland-5wv7dgnIgG8@public.gmane.org\0" + "Cc\0linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org" + devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + stefan.wahren-eS4NqCHxEME@public.gmane.org + " Michael Heimpold <mhei-Z/Lg1yOAjpkb1SvskN2V4Q@public.gmane.org>\0" "\00:1\0" "b\0" "This machine is an USB pen drive sized development board,\n" @@ -10,8 +18,8 @@ "model \"Duckbill\", the \"Duckbill 2\" series has internal\n" "eMMC storage.\n" "\n" - "Signed-off-by: Michael Heimpold <mhei@heimpold.de>\n" - "Cc: Stefan Wahren <stefan.wahren@i2se.com>\n" + "Signed-off-by: Michael Heimpold <mhei-Z/Lg1yOAjpkb1SvskN2V4Q@public.gmane.org>\n" + "Cc: Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org>\n" "---\n" " arch/arm/boot/dts/Makefile | 1 +\n" " arch/arm/boot/dts/imx28-duckbill-2.dts | 183 +++++++++++++++++++++++++++++++++\n" @@ -37,8 +45,8 @@ "+++ b/arch/arm/boot/dts/imx28-duckbill-2.dts\n" "@@ -0,0 +1,183 @@\n" "+/*\n" - "+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>\n" - "+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>\n" + "+ * Copyright (C) 2015-2017 I2SE GmbH <info-eS4NqCHxEME@public.gmane.org>\n" + "+ * Copyright (C) 2016 Michael Heimpold <mhei-Z/Lg1yOAjpkb1SvskN2V4Q@public.gmane.org>\n" "+ *\n" "+ * The code contained herein is licensed under the GNU General Public\n" "+ * License. You may obtain a copy of the GNU General Public License\n" @@ -61,9 +69,9 @@ "+\t\treg = <0x40000000 0x08000000>;\n" "+\t};\n" "+\n" - "+\tapb at 80000000 {\n" - "+\t\tapbh at 80000000 {\n" - "+\t\t\tssp0: ssp at 80010000 {\n" + "+\tapb@80000000 {\n" + "+\t\tapbh@80000000 {\n" + "+\t\t\tssp0: ssp@80010000 {\n" "+\t\t\t\tcompatible = \"fsl,imx28-mmc\";\n" "+\t\t\t\tpinctrl-names = \"default\";\n" "+\t\t\t\tpinctrl-0 = <&mmc0_8bit_pins_a\n" @@ -74,7 +82,7 @@ "+\t\t\t\tnon-removable;\n" "+\t\t\t};\n" "+\n" - "+\t\t\tssp2: ssp at 80014000 {\n" + "+\t\t\tssp2: ssp@80014000 {\n" "+\t\t\t\tcompatible = \"fsl,imx28-mmc\";\n" "+\t\t\t\tpinctrl-names = \"default\";\n" "+\t\t\t\tpinctrl-0 = <&mmc2_4bit_pins_b\n" @@ -84,11 +92,11 @@ "+\t\t\t\tstatus = \"okay\";\n" "+\t\t\t};\n" "+\n" - "+\t\t\tpinctrl at 80018000 {\n" + "+\t\t\tpinctrl@80018000 {\n" "+\t\t\t\tpinctrl-names = \"default\";\n" "+\t\t\t\tpinctrl-0 = <&hog_pins_a>;\n" "+\n" - "+\t\t\t\thog_pins_a: hog at 0 {\n" + "+\t\t\t\thog_pins_a: hog@0 {\n" "+\t\t\t\t\treg = <0>;\n" "+\t\t\t\t\tfsl,pinmux-ids = <\n" "+\t\t\t\t\t\tMX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */\n" @@ -98,7 +106,7 @@ "+\t\t\t\t\tfsl,pull-up = <MXS_PULL_DISABLE>;\n" "+\t\t\t\t};\n" "+\n" - "+\t\t\t\tmac0_phy_reset_pin: mac0-phy-reset at 0 {\n" + "+\t\t\t\tmac0_phy_reset_pin: mac0-phy-reset@0 {\n" "+\t\t\t\t\treg = <0>;\n" "+\t\t\t\t\tfsl,pinmux-ids = <\n" "+\t\t\t\t\t\tMX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */\n" @@ -108,7 +116,7 @@ "+\t\t\t\t\tfsl,pull-up = <MXS_PULL_DISABLE>;\n" "+\t\t\t\t};\n" "+\n" - "+\t\t\t\tmac0_phy_int_pin: mac0-phy-int at 0 {\n" + "+\t\t\t\tmac0_phy_int_pin: mac0-phy-int@0 {\n" "+\t\t\t\t\treg = <0>;\n" "+\t\t\t\t\tfsl,pinmux-ids = <\n" "+\t\t\t\t\t\tMX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */\n" @@ -118,7 +126,7 @@ "+\t\t\t\t\tfsl,pull-up = <MXS_PULL_DISABLE>;\n" "+\t\t\t\t};\n" "+\n" - "+\t\t\t\tled_pins: leds at 0 {\n" + "+\t\t\t\tled_pins: leds@0 {\n" "+\t\t\t\t\treg = <0>;\n" "+\t\t\t\t\tfsl,pinmux-ids = <\n" "+\t\t\t\t\t\tMX28_PAD_SAIF0_MCLK__GPIO_3_20\n" @@ -131,42 +139,42 @@ "+\t\t\t};\n" "+\t\t};\n" "+\n" - "+\t\tapbx at 80040000 {\n" - "+\t\t\tlradc at 80050000 {\n" + "+\t\tapbx@80040000 {\n" + "+\t\t\tlradc@80050000 {\n" "+\t\t\t\tstatus = \"okay\";\n" "+\t\t\t};\n" "+\n" - "+\t\t\ti2c0: i2c at 80058000 {\n" + "+\t\t\ti2c0: i2c@80058000 {\n" "+\t\t\t\tpinctrl-names = \"default\";\n" "+\t\t\t\tpinctrl-0 = <&i2c0_pins_a>;\n" "+\t\t\t\tstatus = \"okay\";\n" "+\t\t\t};\n" "+\n" - "+\t\t\tauart0: serial at 8006a000 {\n" + "+\t\t\tauart0: serial@8006a000 {\n" "+\t\t\t\tpinctrl-names = \"default\";\n" "+\t\t\t\tpinctrl-0 = <&auart0_2pins_a>;\n" "+\t\t\t\tstatus = \"okay\";\n" "+\t\t\t};\n" "+\n" - "+\t\t\tduart: serial at 80074000 {\n" + "+\t\t\tduart: serial@80074000 {\n" "+\t\t\t\tpinctrl-names = \"default\";\n" "+\t\t\t\tpinctrl-0 = <&duart_pins_a>;\n" "+\t\t\t\tstatus = \"okay\";\n" "+\t\t\t};\n" "+\n" - "+\t\t\tusbphy0: usbphy at 8007c000 {\n" + "+\t\t\tusbphy0: usbphy@8007c000 {\n" "+\t\t\t\tstatus = \"okay\";\n" "+\t\t\t};\n" "+\t\t};\n" "+\t};\n" "+\n" - "+\tahb at 80080000 {\n" - "+\t\tusb0: usb at 80080000 {\n" + "+\tahb@80080000 {\n" + "+\t\tusb0: usb@80080000 {\n" "+\t\t\tstatus = \"okay\";\n" "+\t\t\tdr_mode = \"peripheral\";\n" "+\t\t};\n" "+\n" - "+\t\tmac0: ethernet at 800f0000 {\n" + "+\t\tmac0: ethernet@800f0000 {\n" "+\t\t\tphy-mode = \"rmii\";\n" "+\t\t\tpinctrl-names = \"default\";\n" "+\t\t\tpinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;\n" @@ -180,7 +188,7 @@ "+\t\t\t\t#address-cells = <1>;\n" "+\t\t\t\t#size-cells = <0>;\n" "+\n" - "+\t\t\t\tethphy: ethernet-phy at 0 {\n" + "+\t\t\t\tethphy: ethernet-phy@0 {\n" "+\t\t\t\t\tcompatible = \"ethernet-phy-ieee802.3-c22\";\n" "+\t\t\t\t\treg = <0>;\n" "+\t\t\t\t\tpinctrl-names = \"default\";\n" @@ -220,6 +228,11 @@ "+\t};\n" "+};\n" "-- \n" - 2.7.4 + "2.7.4\n" + "\n" + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -082061210be582ab2d7e70aef2bc42a4a4410b1a93e982f5a5763b8176968023 +07f64c6a2f822789383ce7c5b09cbd17f81e5be87a12e3f9fc21089e821bd9a6
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.