All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: bhelgaas@google.com, blake.moore@men.de, gregkh@linuxfoundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "PCI: Enumerate switches below PCI-to-PCIe bridges" has been added to the 4.4-stable tree
Date: Mon, 23 Jan 2017 15:34:48 +0100	[thread overview]
Message-ID: <1485182088218149@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    PCI: Enumerate switches below PCI-to-PCIe bridges

to the 4.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     pci-enumerate-switches-below-pci-to-pcie-bridges.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 51ebfc92b72b4f7dac1ab45683bf56741e454b8c Mon Sep 17 00:00:00 2001
From: Bjorn Helgaas <bhelgaas@google.com>
Date: Wed, 11 Jan 2017 09:11:53 -0600
Subject: PCI: Enumerate switches below PCI-to-PCIe bridges

From: Bjorn Helgaas <bhelgaas@google.com>

commit 51ebfc92b72b4f7dac1ab45683bf56741e454b8c upstream.

A PCI-to-PCIe bridge (a "reverse bridge") has a PCI or PCI-X primary
interface and a PCI Express secondary interface.  The PCIe interface is a
Downstream Port that originates a Link.  See the "PCI Express to PCI/PCI-X
Bridge Specification", rev 1.0, sections 1.2 and A.6.

The bug report below involves a PCI-to-PCIe bridge and a PCIe switch below
the bridge:

  00:1e.0 Intel 82801 PCI Bridge to [bus 01-0a]
  01:00.0 Pericom PI7C9X111SL PCIe-to-PCI Reversible Bridge to [bus 02-0a]
  02:00.0 Pericom Device 8608 [PCIe Upstream Port] to [bus 03-0a]
  03:01.0 Pericom Device 8608 [PCIe Downstream Port] to [bus 0a]

01:00.0 is configured as a PCI-to-PCIe bridge (despite the name printed by
lspci).  As we traverse a PCIe hierarchy, device connections alternate
between PCIe Links and internal Switch logic.  Previously we did not
recognize that 01:00.0 had a secondary link, so we thought the 02:00.0
Upstream Port *did* have a secondary link.  In fact, it's the other way
around: 01:00.0 has a secondary link, and 02:00.0 has internal Switch logic
on its secondary side.

When we thought 02:00.0 had a secondary link, the pci_scan_slot() ->
only_one_child() path assumed 02:00.0 could have only one child, so 03:00.0
was the only possible downstream device.  But 03:00.0 doesn't exist, so we
didn't look for any other devices on bus 03.

Booting with "pci=pcie_scan_all" is a workaround, but we don't want users
to have to do that.

Recognize that PCI-to-PCIe bridges originate links on their secondary
interfaces.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=189361
Fixes: d0751b98dfa3 ("PCI: Add dev->has_secondary_link to track downstream PCIe links")
Tested-by: Blake Moore <blake.moore@men.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/probe.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1019,6 +1019,7 @@ void set_pcie_port_type(struct pci_dev *
 	pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
 	if (!pos)
 		return;
+
 	pdev->pcie_cap = pos;
 	pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, &reg16);
 	pdev->pcie_flags_reg = reg16;
@@ -1026,13 +1027,14 @@ void set_pcie_port_type(struct pci_dev *
 	pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD;
 
 	/*
-	 * A Root Port is always the upstream end of a Link.  No PCIe
-	 * component has two Links.  Two Links are connected by a Switch
-	 * that has a Port on each Link and internal logic to connect the
-	 * two Ports.
+	 * A Root Port or a PCI-to-PCIe bridge is always the upstream end
+	 * of a Link.  No PCIe component has two Links.  Two Links are
+	 * connected by a Switch that has a Port on each Link and internal
+	 * logic to connect the two Ports.
 	 */
 	type = pci_pcie_type(pdev);
-	if (type == PCI_EXP_TYPE_ROOT_PORT)
+	if (type == PCI_EXP_TYPE_ROOT_PORT ||
+	    type == PCI_EXP_TYPE_PCIE_BRIDGE)
 		pdev->has_secondary_link = 1;
 	else if (type == PCI_EXP_TYPE_UPSTREAM ||
 		 type == PCI_EXP_TYPE_DOWNSTREAM) {


Patches currently in stable-queue which might be from bhelgaas@google.com are

queue-4.4/x86-pci-ignore-_crs-on-supermicro-x8dth-i-6-if-6f.patch
queue-4.4/pci-enumerate-switches-below-pci-to-pcie-bridges.patch

                 reply	other threads:[~2017-01-23 14:35 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1485182088218149@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=bhelgaas@google.com \
    --cc=blake.moore@men.de \
    --cc=stable-commits@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.