From: Dalon Westergreen <dwesterg@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v8 2/7] arm: socfpga: update de0 nano default environment
Date: Sat, 28 Jan 2017 15:05:13 -0800 [thread overview]
Message-ID: <1485644718-20435-3-git-send-email-dwesterg@gmail.com> (raw)
In-Reply-To: <1485644718-20435-1-git-send-email-dwesterg@gmail.com>
From: Dalon Westergreen <dalon.westergreen@intel.com>
Remove the default environment as it is now in a common
header.
Add the CONFIG_DEFAULT_DEVICE_TREE to the board's defconfig
to set the linux devicetree name.
Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
Acked-by: Marek Vasut <marex@denx.de>
---
configs/socfpga_de0_nano_soc_defconfig | 3 +--
include/configs/socfpga_common.h | 2 +-
include/configs/socfpga_de0_nano_soc.h | 19 +------------------
3 files changed, 3 insertions(+), 21 deletions(-)
diff --git a/configs/socfpga_de0_nano_soc_defconfig b/configs/socfpga_de0_nano_soc_defconfig
index af41e1e..4837809 100644
--- a/configs/socfpga_de0_nano_soc_defconfig
+++ b/configs/socfpga_de0_nano_soc_defconfig
@@ -4,6 +4,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_SOCFPGA_TERASIC_DE0_NANO=y
CONFIG_SPL_STACK_R_ADDR=0x00800000
CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de0_nano_soc"
+CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_de0_sockit.dtb"
CONFIG_FIT=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
@@ -20,7 +21,6 @@ CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
@@ -35,7 +35,6 @@ CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
-CONFIG_CMD_UBI=y
CONFIG_SPL_DM=y
CONFIG_DFU_MMC=y
CONFIG_DM_GPIO=y
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index 744aee9..ed6d8ea 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -319,7 +319,7 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 2
#endif
#else
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 3
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1
#endif
#endif
diff --git a/include/configs/socfpga_de0_nano_soc.h b/include/configs/socfpga_de0_nano_soc.h
index 6b9546e..97216ea 100644
--- a/include/configs/socfpga_de0_nano_soc.h
+++ b/include/configs/socfpga_de0_nano_soc.h
@@ -18,7 +18,7 @@
#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB */
/* Booting Linux */
-#define CONFIG_BOOTFILE "fitImage"
+#define CONFIG_BOOTFILE "zImage"
#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE)
#define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot"
#define CONFIG_LOADADDR 0x01000000
@@ -32,23 +32,6 @@
#define CONFIG_ENV_IS_IN_MMC
-/* Extra Environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
- "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
- "bootm ${loadaddr} - ${fdt_addr}\0" \
- "bootimage=zImage\0" \
- "fdt_addr=100\0" \
- "fdtimage=socfpga.dtb\0" \
- "bootm ${loadaddr} - ${fdt_addr}\0" \
- "mmcroot=/dev/mmcblk0p2\0" \
- "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
- " root=${mmcroot} rw rootwait;" \
- "bootz ${loadaddr} - ${fdt_addr}\0" \
- "mmcload=mmc rescan;" \
- "load mmc 0:1 ${loadaddr} ${bootimage};" \
- "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
-
/* The rest of the configuration is shared */
#include <configs/socfpga_common.h>
--
2.7.4
next prev parent reply other threads:[~2017-01-28 23:05 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-28 23:05 [U-Boot] [PATCH v8 0/7] arm: socfpga: update default u-boot environment Dalon Westergreen
2017-01-28 23:05 ` [U-Boot] [PATCH v8 1/7] arm: socfpga: add env settings to common header Dalon Westergreen
2017-01-30 14:55 ` Alexander Graf
2017-01-30 15:11 ` Dalon Westergreen
2017-01-30 15:14 ` Alexander Graf
2017-01-28 23:05 ` Dalon Westergreen [this message]
2017-01-30 15:04 ` [U-Boot] [PATCH v8 2/7] arm: socfpga: update de0 nano default environment Alexander Graf
2017-01-28 23:05 ` [U-Boot] [PATCH v8 3/7] arm: socfpga: update cyclone5 socdk " Dalon Westergreen
2017-01-28 23:05 ` [U-Boot] [PATCH v8 4/7] arm: socfpga: update arria5 " Dalon Westergreen
2017-01-28 23:05 ` [U-Boot] [PATCH v8 5/7] arm: socfpga: Update DE1 environment Dalon Westergreen
2017-01-30 15:07 ` Alexander Graf
2017-01-30 15:17 ` Westergreen, Dalon
2017-01-28 23:05 ` [U-Boot] [PATCH v8 6/7] arm: socfpga: Update SoCKit environment Dalon Westergreen
2017-01-28 23:05 ` [U-Boot] [PATCH v8 7/7] arm: socfpga: Update sr1500 environment Dalon Westergreen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1485644718-20435-3-git-send-email-dwesterg@gmail.com \
--to=dwesterg@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.