From: <gregkh@linuxfoundation.org>
To: decui@microsoft.com, gregkh@linuxfoundation.org,
haiyangz@microsoft.com, kys@microsoft.com,
rolf.neugebauer@docker.com, stable@vger.kernel.org,
sthemmin@microsoft.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] Drivers: hv: vmbus: finally fix hv_need_to_signal_on_read()" failed to apply to 4.9-stable tree
Date: Sun, 05 Feb 2017 11:21:36 +0100 [thread overview]
Message-ID: <148629009614633@kroah.com> (raw)
The patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 433e19cf33d34bb6751c874a9c00980552fe508c Mon Sep 17 00:00:00 2001
From: Dexuan Cui <decui@microsoft.com>
Date: Sat, 28 Jan 2017 11:46:02 -0700
Subject: [PATCH] Drivers: hv: vmbus: finally fix hv_need_to_signal_on_read()
Commit a389fcfd2cb5 ("Drivers: hv: vmbus: Fix signaling logic in
hv_need_to_signal_on_read()")
added the proper mb(), but removed the test "prev_write_sz < pending_sz"
when making the signal decision.
As a result, the guest can signal the host unnecessarily,
and then the host can throttle the guest because the host
thinks the guest is buggy or malicious; finally the user
running stress test can perceive intermittent freeze of
the guest.
This patch brings back the test, and properly handles the
in-place consumption APIs used by NetVSC (see get_next_pkt_raw(),
put_pkt_raw() and commit_rd_index()).
Fixes: a389fcfd2cb5 ("Drivers: hv: vmbus: Fix signaling logic in
hv_need_to_signal_on_read()")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reported-by: Rolf Neugebauer <rolf.neugebauer@docker.com>
Tested-by: Rolf Neugebauer <rolf.neugebauer@docker.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/hv/ring_buffer.c b/drivers/hv/ring_buffer.c
index cd49cb17eb7f..308dbda700eb 100644
--- a/drivers/hv/ring_buffer.c
+++ b/drivers/hv/ring_buffer.c
@@ -383,6 +383,7 @@ int hv_ringbuffer_read(struct vmbus_channel *channel,
return ret;
}
+ init_cached_read_index(channel);
next_read_location = hv_get_next_read_location(inring_info);
next_read_location = hv_copyfrom_ringbuffer(inring_info, &desc,
sizeof(desc),
diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c
index 5a1cc089acb7..86e5749226ef 100644
--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -1295,6 +1295,9 @@ void netvsc_channel_cb(void *context)
ndev = hv_get_drvdata(device);
buffer = get_per_channel_state(channel);
+ /* commit_rd_index() -> hv_signal_on_read() needs this. */
+ init_cached_read_index(channel);
+
do {
desc = get_next_pkt_raw(channel);
if (desc != NULL) {
@@ -1347,6 +1350,9 @@ void netvsc_channel_cb(void *context)
bufferlen = bytes_recvd;
}
+
+ init_cached_read_index(channel);
+
} while (1);
if (bufferlen > NETVSC_PACKET_SIZE)
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index 42fe43fb0c80..183efde54269 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -128,6 +128,7 @@ struct hv_ring_buffer_info {
u32 ring_data_startoffset;
u32 priv_write_index;
u32 priv_read_index;
+ u32 cached_read_index;
};
/*
@@ -180,6 +181,19 @@ static inline u32 hv_get_bytes_to_write(struct hv_ring_buffer_info *rbi)
return write;
}
+static inline u32 hv_get_cached_bytes_to_write(
+ const struct hv_ring_buffer_info *rbi)
+{
+ u32 read_loc, write_loc, dsize, write;
+
+ dsize = rbi->ring_datasize;
+ read_loc = rbi->cached_read_index;
+ write_loc = rbi->ring_buffer->write_index;
+
+ write = write_loc >= read_loc ? dsize - (write_loc - read_loc) :
+ read_loc - write_loc;
+ return write;
+}
/*
* VMBUS version is 32 bit entity broken up into
* two 16 bit quantities: major_number. minor_number.
@@ -1488,7 +1502,7 @@ hv_get_ring_buffer(struct hv_ring_buffer_info *ring_info)
static inline void hv_signal_on_read(struct vmbus_channel *channel)
{
- u32 cur_write_sz;
+ u32 cur_write_sz, cached_write_sz;
u32 pending_sz;
struct hv_ring_buffer_info *rbi = &channel->inbound;
@@ -1512,12 +1526,24 @@ static inline void hv_signal_on_read(struct vmbus_channel *channel)
cur_write_sz = hv_get_bytes_to_write(rbi);
- if (cur_write_sz >= pending_sz)
+ if (cur_write_sz < pending_sz)
+ return;
+
+ cached_write_sz = hv_get_cached_bytes_to_write(rbi);
+ if (cached_write_sz < pending_sz)
vmbus_setevent(channel);
return;
}
+static inline void
+init_cached_read_index(struct vmbus_channel *channel)
+{
+ struct hv_ring_buffer_info *rbi = &channel->inbound;
+
+ rbi->cached_read_index = rbi->ring_buffer->read_index;
+}
+
/*
* An API to support in-place processing of incoming VMBUS packets.
*/
@@ -1569,6 +1595,8 @@ static inline void put_pkt_raw(struct vmbus_channel *channel,
* This call commits the read index and potentially signals the host.
* Here is the pattern for using the "in-place" consumption APIs:
*
+ * init_cached_read_index();
+ *
* while (get_next_pkt_raw() {
* process the packet "in-place";
* put_pkt_raw();
next reply other threads:[~2017-02-05 10:21 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-05 10:21 gregkh [this message]
[not found] ` <CA+pO-2d+UPUfMMyT5Nxmcg8OhWug4g4jfOkwh=bMUOK7MFRQBA@mail.gmail.com>
2017-02-07 10:52 ` FAILED: patch "[PATCH] Drivers: hv: vmbus: finally fix hv_need_to_signal_on_read()" failed to apply to 4.9-stable tree Greg KH
2017-02-10 21:17 ` Greg KH
[not found] ` <CA+pO-2f35szYmybPkyTCN-S85HPBsq0zqiD+A4MgHvD4cEZe9g@mail.gmail.com>
2017-02-11 7:14 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=148629009614633@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=decui@microsoft.com \
--cc=haiyangz@microsoft.com \
--cc=kys@microsoft.com \
--cc=rolf.neugebauer@docker.com \
--cc=stable@vger.kernel.org \
--cc=sthemmin@microsoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.