All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 2/9] efi: move clocksource out of arch
Date: Fri, 10 Feb 2017 11:37:43 +0100	[thread overview]
Message-ID: <1486723070-32548-2-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1486723070-32548-1-git-send-email-plagnioj@jcrosoft.com>

as efi is not an arch but a boot mode from where barebox is started

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/efi/Kconfig                                        | 1 +
 arch/efi/efi/Makefile                                   | 1 -
 drivers/clocksource/Kconfig                             | 4 ++++
 drivers/clocksource/Makefile                            | 1 +
 arch/efi/efi/clocksource.c => drivers/clocksource/efi.c | 0
 5 files changed, 6 insertions(+), 1 deletion(-)
 rename arch/efi/efi/clocksource.c => drivers/clocksource/efi.c (100%)

diff --git a/arch/efi/Kconfig b/arch/efi/Kconfig
index d8d0592e5..01301c04f 100644
--- a/arch/efi/Kconfig
+++ b/arch/efi/Kconfig
@@ -7,6 +7,7 @@ config ARCH_EFI
 	select EFI_DEVICEPATH
 	select PRINTF_UUID
 	select GENERIC_FIND_NEXT_BIT
+	select CLOCKSOURCE_EFI
 
 config ARCH_TEXT_BASE
 	hex
diff --git a/arch/efi/efi/Makefile b/arch/efi/efi/Makefile
index f088c7a94..51db60b88 100644
--- a/arch/efi/efi/Makefile
+++ b/arch/efi/efi/Makefile
@@ -1,4 +1,3 @@
-obj-y += clocksource.o
 obj-y += efi.o
 obj-y += efi-device.o
 obj-y += efi-image.o
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index f1ab554f9..ae1f10eae 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -34,6 +34,10 @@ config CLOCKSOURCE_DUMMY_RATE
 	  The option CONFIG_CLOCKSOURCE_DUMMY_RATE is used to adjust this clocksource.
 	  The bigger rate valuest makes clocksource "faster".
 
+config CLOCKSOURCE_EFI
+	bool
+	depends on ARCH_EFI
+
 config CLOCKSOURCE_MVEBU
 	bool
 	depends on ARCH_MVEBU
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 39982ffb2..e83fdeeec 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_ARM_SMP_TWD) += arm_smp_twd.o
 obj-$(CONFIG_CLOCKSOURCE_BCM283X) += bcm2835.o
 obj-$(CONFIG_CLOCKSOURCE_CLPS711X) += clps711x.o
 obj-$(CONFIG_CLOCKSOURCE_DIGIC)   += digic.o
+obj-$(CONFIG_CLOCKSOURCE_EFI) += efi.o
 obj-$(CONFIG_CLOCKSOURCE_MVEBU)   += mvebu.o
 obj-$(CONFIG_CLOCKSOURCE_NOMADIK) += nomadik.o
 obj-$(CONFIG_CLOCKSOURCE_ORION)   += orion.o
diff --git a/arch/efi/efi/clocksource.c b/drivers/clocksource/efi.c
similarity index 100%
rename from arch/efi/efi/clocksource.c
rename to drivers/clocksource/efi.c
-- 
2.11.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2017-02-10 10:32 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-10  9:56 [PATCH 0/9] EFI: drop arch efi Jean-Christophe PLAGNIOL-VILLARD
2017-02-10 10:37 ` [PATCH 1/9] efi: move block io driver to driver/block Jean-Christophe PLAGNIOL-VILLARD
2017-02-10 10:37   ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2017-02-10 10:37   ` [PATCH 3/9] efi: move bus driver to driver/efi Jean-Christophe PLAGNIOL-VILLARD
2017-02-10 10:37   ` [PATCH 4/9] efi: move debug_ll.h to include/efi Jean-Christophe PLAGNIOL-VILLARD
2017-02-10 10:37   ` [PATCH 5/9] efi: move startup and payload to common/efi Jean-Christophe PLAGNIOL-VILLARD
2017-02-10 10:37   ` [PATCH 6/9] x86: move bios bootup code to arch/x86/bios Jean-Christophe PLAGNIOL-VILLARD
2017-02-10 10:37   ` [PATCH 7/9] efi: move x86 efi boot support to x86 arch Jean-Christophe PLAGNIOL-VILLARD
2017-02-10 10:37   ` [PATCH 8/9] ARCH: efi: Finally drop it as now we can build efi bootup from x86 Jean-Christophe PLAGNIOL-VILLARD
2017-02-10 10:37   ` [PATCH 9/9] efi: bus: add firmware vendor and resision and tables info Jean-Christophe PLAGNIOL-VILLARD
2017-02-14  7:39 ` [PATCH 0/9] EFI: drop arch efi Sascha Hauer
2017-02-15 13:04 ` Sascha Hauer
2017-02-15 19:27   ` Jean-Christophe PLAGNIOL-VILLARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1486723070-32548-2-git-send-email-plagnioj@jcrosoft.com \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.