From: Dalon Westergreen <dwesterg@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] arm: socfpga: Add support for the Terasic DE10-nano
Date: Sat, 18 Feb 2017 16:59:12 -0800 [thread overview]
Message-ID: <1487465952.6396.23.camel@gmail.com> (raw)
In-Reply-To: <b87d3f21-bfa2-5d30-b846-75b4337a88e8@denx.de>
On Sun, 2017-02-19 at 01:35 +0100, Marek Vasut wrote:
> On 02/19/2017 12:15 AM, Dalon Westergreen wrote:
> >
> > On Sat, 2017-02-18 at 22:04 +0100, Marek Vasut wrote:
> > >
> > > On 02/18/2017 09:56 PM, Dalon Westergreen wrote:
> > > >
> > > >
> > > > Add support for the cyclone5 soc based Terasic DE10-nano.??The
> > > > board is a second generation version of the DE0-nano-soc but has
> > > > the a larger FPGA and hdmi support.
> > > >
> > > > Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
> > >
> > > Looks pretty nice, minor nits below
> > >
> > > [...]
> > >
> > > >
> > > >
> > > > diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-
> > > > socfpga/Kconfig
> > > > index e56b3db..6a776b5 100644
> > > > --- a/arch/arm/mach-socfpga/Kconfig
> > > > +++ b/arch/arm/mach-socfpga/Kconfig
> > > > @@ -85,6 +85,10 @@ config TARGET_SOCFPGA_TERASIC_DE1_SOC
> > > > ? bool "Terasic DE1-SoC (Cyclone V)"
> > > > ? select TARGET_SOCFPGA_CYCLONE5
> > > > ?
> > > > +config TARGET_SOCFPGA_TERASIC_DE10_NANO
> > > > + bool "Terasic DE10-Nano (Cyclone V)"
> > > > + select TARGET_SOCFPGA_CYCLONE5
> > > > +
> > > > ?config TARGET_SOCFPGA_TERASIC_SOCKIT
> > > > ? bool "Terasic SoCkit (Cyclone V)"
> > > > ? select TARGET_SOCFPGA_CYCLONE5
> > > > @@ -96,6 +100,7 @@ config SYS_BOARD
> > > > ? default "cyclone5-socdk" if TARGET_SOCFPGA_CYCLONE5_SOCDK
> > > > ? default "de0-nano-soc" if TARGET_SOCFPGA_TERASIC_DE0_NANO
> > > > ? default "de1-soc" if TARGET_SOCFPGA_TERASIC_DE1_SOC
> > > > + default "de10-nano" if TARGET_SOCFPGA_TERASIC_DE10_NANO
> > > > ? default "is1" if TARGET_SOCFPGA_IS1
> > > > ? default "mcvevk" if TARGET_SOCFPGA_DENX_MCVEVK
> > > > ? default "sockit" if TARGET_SOCFPGA_TERASIC_SOCKIT
> > > > @@ -112,6 +117,7 @@ config SYS_VENDOR
> > > > ? default "terasic" if TARGET_SOCFPGA_TERASIC_DE0_NANO
> > > > ? default "terasic" if TARGET_SOCFPGA_TERASIC_DE1_SOC
> > > > ? default "terasic" if TARGET_SOCFPGA_TERASIC_SOCKIT
> > > > + default "terasic" if TARGET_SOCFPGA_TERASIC_DE10_NANO
> > >
> > > Keep the list sorted please.
> > >
> > > >
> > > >
> > > > ?
> > > > ?config SYS_SOC
> > > > ? default "socfpga"
> > > > @@ -121,6 +127,7 @@ config SYS_CONFIG_NAME
> > > > ? default "socfpga_cyclone5_socdk" if
> > > > TARGET_SOCFPGA_CYCLONE5_SOCDK
> > > > ? default "socfpga_de0_nano_soc" if
> > > > TARGET_SOCFPGA_TERASIC_DE0_NANO
> > > > ? default "socfpga_de1_soc" if TARGET_SOCFPGA_TERASIC_DE1_SOC
> > > > + default "socfpga_de10_nano" if TARGET_SOCFPGA_TERASIC_DE10_NANO
> > > > ? default "socfpga_is1" if TARGET_SOCFPGA_IS1
> > > > ? default "socfpga_mcvevk" if TARGET_SOCFPGA_DENX_MCVEVK
> > > > ? default "socfpga_sockit" if TARGET_SOCFPGA_TERASIC_SOCKIT
> > > > diff --git a/board/terasic/de10-nano/MAINTAINERS b/board/terasic/de10-
> > > > nano/MAINTAINERS
> > > > new file mode 100644
> > > > index 0000000..f4dd0df
> > > > --- /dev/null
> > > > +++ b/board/terasic/de10-nano/MAINTAINERS
> > > > @@ -0,0 +1,5 @@
> > > > +DE10-NANO BOARD
> > > > +M: Dalon Westergreen <dwesterg@gmail.com>
> > > > +S: Maintained
> > > > +F: include/configs/socfpga_de10_nano.h
> > > > +F: configs/socfpga_de10_nano_defconfig
> > > > diff --git a/board/terasic/de10-nano/Makefile b/board/terasic/de10-
> > > > nano/Makefile
> > > > new file mode 100644
> > > > index 0000000..86f9b78
> > > > --- /dev/null
> > > > +++ b/board/terasic/de10-nano/Makefile
> > > > @@ -0,0 +1,9 @@
> > > > +#
> > > > +# (C) Copyright 2001-2006
> > > > +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> > > > +# (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
> > >
> > > Really ? Looks like a new file, so (C) you
> > >
> > > >
> > > >
> > > > +# SPDX-License-Identifier: GPL-2.0+
> > > > +#
> > > > +
> > > > +obj-y := socfpga.o
> > >
> > > [...]
> > >
> > > >
> > > >
> > > > diff --git a/include/configs/socfpga_de10_nano.h
> > > > b/include/configs/socfpga_de10_nano.h
> > > > new file mode 100644
> > > > index 0000000..61a5066
> > > > --- /dev/null
> > > > +++ b/include/configs/socfpga_de10_nano.h
> > > > @@ -0,0 +1,36 @@
> > > > +/*
> > > > + * Copyright (C) 2017, Intel Corporation
> > > > + *
> > > > + * SPDX-License-Identifier: GPL-2.0+
> > > > + */
> > > > +#ifndef __CONFIG_TERASIC_DE10_H__
> > > > +#define __CONFIG_TERASIC_DE10_H__
> > > > +
> > > > +#include <asm/arch/base_addr_ac5.h>
> > > > +
> > > > +/* U-Boot Commands */
> > > > +#define CONFIG_FAT_WRITE
> > > > +#define CONFIG_HW_WATCHDOG
> > > > +
> > > > +/* Memory configurations */
> > > > +#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB */
> > > > +
> > > > +/* Booting Linux */
> > > > +#define CONFIG_BOOTFILE "zImage"
> > > > +#define CONFIG_LOADADDR 0x01000000
> > > > +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
> > > > +
> > > > +/* Ethernet on SoC (EMAC) */
> > > > +#if defined(CONFIG_CMD_NET)
> > > > +#define CONFIG_PHY_MICREL
> > > > +#define CONFIG_PHY_MICREL_KSZ9031
> > > > +#endif
> > > > +
> > > > +#define CONFIG_ENV_IS_IN_MMC
> > > > +
> > > > +#define CONFIG_BOOTCOMMAND "run fpga_cfg; run distro_bootcmd"
> > >
> > > What is "fpga_cfg" ?
> > sorry, thanks for catching that.??i am playing with something
> > like the way distro boot searches for files, but for the fpga image.
>
> Like the FPGA manager which is being upstreamed into Linux and which is
> the only sensible way to manage reprogramable hardware ? :) Also, if you
> used fitImage instead of that stupid zImage, you would be able to bundle
> all the components needed to boot system into a single consistent image ;-)
>
I know, that is my next step... :)
next prev parent reply other threads:[~2017-02-19 0:59 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-18 20:56 [U-Boot] [PATCH] arm: socfpga: Add support for the Terasic DE10-nano Dalon Westergreen
2017-02-18 21:04 ` Marek Vasut
2017-02-18 23:15 ` Dalon Westergreen
2017-02-19 0:35 ` Marek Vasut
2017-02-19 0:59 ` Dalon Westergreen [this message]
2017-02-19 2:25 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1487465952.6396.23.camel@gmail.com \
--to=dwesterg@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.