From: jbrunet@baylibre.com (Jerome Brunet)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v5 0/9] meson-gx: reset RGMII PHYs and configure TX delay
Date: Mon, 20 Feb 2017 10:08:39 +0100 [thread overview]
Message-ID: <1487581719.3734.1.camel@baylibre.com> (raw)
In-Reply-To: <20170219214149.30418-1-martin.blumenstingl@googlemail.com>
On Sun, 2017-02-19 at 22:41 +0100, Martin Blumenstingl wrote:
> This series adds the reset GPIOs for the (external) ethernet PHYs on
> all
> GXBB boards.
> Additionally it provides a ethernet PHY node which can be used to
> specify
> PHY-specific properties (this may be required if more boards require
> the
> "eee-broken-1000t" for the RTL8211F ethernet PHY). To make all board
> .dts
> consistent I chose to add the PHY node also for boards which don't
> have a
> RTL8211F PHY.
>
Looks good to me. For the patchset:
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
>
> Martin Blumenstingl (9):
> ? ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO
> ? ARM64: dts: meson-gxbb-p200: add the ethernet PHY's reset GPIO
> ? ARM64: dts: meson-gxbb-vega-s95: add the ethernet PHY's reset GPIO
> ? ARM64: dts: meson-gxbb-nexbox-a95x: add the ethernet PHY's reset
> GPIO
> ? ARM64: dts: meson-gxbb-wetek-hub: add the ethernet PHY's reset GPIO
> ? ARM64: dts: meson-gxbb-wetek-play2: add the ethernet PHY's reset
> GPIO
> ? ARM64: dts: meson-gxbb-p201: fix ethernet support
> ? ARM64: dts: amlogic: add the ethernet TX delay configuration
> ? ARM64: dts: meson-gx: remove the phy-mode property from meson-gx
>
> ?arch/arm64/boot/dts/amlogic/meson-gx.dtsi??????????|??1 -
> ?.../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts????| 17
> ++++++++++++++
> ?.../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts |??7 ++++++
> ?arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts????| 25
> +++++++++++++++++++++
> ?arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts????| 11 +++++++++
> ?arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi???|??6 -----
> ?.../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi??????| 21
> ++++++++++++++++-
> ?.../boot/dts/amlogic/meson-gxbb-wetek-hub.dts??????| 26
> ++++++++++++++++++++++
> ?.../boot/dts/amlogic/meson-gxbb-wetek-play2.dts????| 26
> ++++++++++++++++++++++
> ?.../boot/dts/amlogic/meson-gxl-s905d-p230.dts??????|??2 ++
> ?.../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts |??2 ++
> ?arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts?????|??2 ++
> ?12 files changed, 138 insertions(+), 8 deletions(-)
>
WARNING: multiple messages have this Message-ID (diff)
From: jbrunet@baylibre.com (Jerome Brunet)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 0/9] meson-gx: reset RGMII PHYs and configure TX delay
Date: Mon, 20 Feb 2017 10:08:39 +0100 [thread overview]
Message-ID: <1487581719.3734.1.camel@baylibre.com> (raw)
In-Reply-To: <20170219214149.30418-1-martin.blumenstingl@googlemail.com>
On Sun, 2017-02-19 at 22:41 +0100, Martin Blumenstingl wrote:
> This series adds the reset GPIOs for the (external) ethernet PHYs on
> all
> GXBB boards.
> Additionally it provides a ethernet PHY node which can be used to
> specify
> PHY-specific properties (this may be required if more boards require
> the
> "eee-broken-1000t" for the RTL8211F ethernet PHY). To make all board
> .dts
> consistent I chose to add the PHY node also for boards which don't
> have a
> RTL8211F PHY.
>
Looks good to me. For the patchset:
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
>
> Martin Blumenstingl (9):
> ? ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO
> ? ARM64: dts: meson-gxbb-p200: add the ethernet PHY's reset GPIO
> ? ARM64: dts: meson-gxbb-vega-s95: add the ethernet PHY's reset GPIO
> ? ARM64: dts: meson-gxbb-nexbox-a95x: add the ethernet PHY's reset
> GPIO
> ? ARM64: dts: meson-gxbb-wetek-hub: add the ethernet PHY's reset GPIO
> ? ARM64: dts: meson-gxbb-wetek-play2: add the ethernet PHY's reset
> GPIO
> ? ARM64: dts: meson-gxbb-p201: fix ethernet support
> ? ARM64: dts: amlogic: add the ethernet TX delay configuration
> ? ARM64: dts: meson-gx: remove the phy-mode property from meson-gx
>
> ?arch/arm64/boot/dts/amlogic/meson-gx.dtsi??????????|??1 -
> ?.../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts????| 17
> ++++++++++++++
> ?.../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts |??7 ++++++
> ?arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts????| 25
> +++++++++++++++++++++
> ?arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts????| 11 +++++++++
> ?arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi???|??6 -----
> ?.../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi??????| 21
> ++++++++++++++++-
> ?.../boot/dts/amlogic/meson-gxbb-wetek-hub.dts??????| 26
> ++++++++++++++++++++++
> ?.../boot/dts/amlogic/meson-gxbb-wetek-play2.dts????| 26
> ++++++++++++++++++++++
> ?.../boot/dts/amlogic/meson-gxl-s905d-p230.dts??????|??2 ++
> ?.../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts |??2 ++
> ?arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts?????|??2 ++
> ?12 files changed, 138 insertions(+), 8 deletions(-)
>
WARNING: multiple messages have this Message-ID (diff)
From: Jerome Brunet <jbrunet-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
To: Martin Blumenstingl
<martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>,
khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
will.deacon-5wv7dgnIgG8@public.gmane.org,
catalin.marinas-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
andrew-g2DYL2Zd6BY@public.gmane.org
Subject: Re: [PATCH v5 0/9] meson-gx: reset RGMII PHYs and configure TX delay
Date: Mon, 20 Feb 2017 10:08:39 +0100 [thread overview]
Message-ID: <1487581719.3734.1.camel@baylibre.com> (raw)
In-Reply-To: <20170219214149.30418-1-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
On Sun, 2017-02-19 at 22:41 +0100, Martin Blumenstingl wrote:
> This series adds the reset GPIOs for the (external) ethernet PHYs on
> all
> GXBB boards.
> Additionally it provides a ethernet PHY node which can be used to
> specify
> PHY-specific properties (this may be required if more boards require
> the
> "eee-broken-1000t" for the RTL8211F ethernet PHY). To make all board
> .dts
> consistent I chose to add the PHY node also for boards which don't
> have a
> RTL8211F PHY.
>
Looks good to me. For the patchset:
Reviewed-by: Jerome Brunet <jbrunet-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
>
> Martin Blumenstingl (9):
> ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO
> ARM64: dts: meson-gxbb-p200: add the ethernet PHY's reset GPIO
> ARM64: dts: meson-gxbb-vega-s95: add the ethernet PHY's reset GPIO
> ARM64: dts: meson-gxbb-nexbox-a95x: add the ethernet PHY's reset
> GPIO
> ARM64: dts: meson-gxbb-wetek-hub: add the ethernet PHY's reset GPIO
> ARM64: dts: meson-gxbb-wetek-play2: add the ethernet PHY's reset
> GPIO
> ARM64: dts: meson-gxbb-p201: fix ethernet support
> ARM64: dts: amlogic: add the ethernet TX delay configuration
> ARM64: dts: meson-gx: remove the phy-mode property from meson-gx
>
> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 1 -
> .../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 17
> ++++++++++++++
> .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 7 ++++++
> arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts | 25
> +++++++++++++++++++++
> arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts | 11 +++++++++
> arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 6 -----
> .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 21
> ++++++++++++++++-
> .../boot/dts/amlogic/meson-gxbb-wetek-hub.dts | 26
> ++++++++++++++++++++++
> .../boot/dts/amlogic/meson-gxbb-wetek-play2.dts | 26
> ++++++++++++++++++++++
> .../boot/dts/amlogic/meson-gxl-s905d-p230.dts | 2 ++
> .../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 2 ++
> arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts | 2 ++
> 12 files changed, 138 insertions(+), 8 deletions(-)
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-02-20 9:08 UTC|newest]
Thread overview: 234+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-02 23:47 [PATCH 0/5] meson-gx: reset RGMII PHYs and configure TX delay Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 1/5] ARM64: dts: meson-gx: move the MDIO node to meson-gx Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 2/5] ARM64: dts: meson-gxbb-odroidc2: add reset for the ethernet PHY Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 3/5] ARM64: dts: meson-gxbb-p20x: " Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2017-01-17 19:22 ` Jerome Brunet
2017-01-17 19:22 ` Jerome Brunet
2017-01-17 19:22 ` Jerome Brunet
2017-01-17 21:26 ` Martin Blumenstingl
2017-01-17 21:26 ` Martin Blumenstingl
2017-01-17 21:26 ` Martin Blumenstingl
2017-01-18 10:36 ` Jerome Brunet
2017-01-18 10:36 ` Jerome Brunet
2017-01-18 10:36 ` Jerome Brunet
2017-01-18 14:26 ` Martin Blumenstingl
2017-01-18 14:26 ` Martin Blumenstingl
2017-01-18 14:26 ` Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 4/5] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` [PATCH 5/5] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-02 23:47 ` Martin Blumenstingl
2016-12-17 20:36 ` [PATCH 0/5] meson-gx: reset RGMII PHYs and configure TX delay Martin Blumenstingl
2016-12-17 20:36 ` Martin Blumenstingl
2016-12-17 20:36 ` Martin Blumenstingl
2017-01-09 22:52 ` Kevin Hilman
2017-01-09 22:52 ` Kevin Hilman
2017-01-09 22:52 ` Kevin Hilman
2017-01-17 19:23 ` Jerome Brunet
2017-01-17 19:23 ` Jerome Brunet
2017-01-17 19:23 ` Jerome Brunet
2017-01-17 21:09 ` Martin Blumenstingl
2017-01-17 21:09 ` Martin Blumenstingl
2017-01-17 21:09 ` Martin Blumenstingl
2017-01-17 22:26 ` Jerome Brunet
2017-01-17 22:26 ` Jerome Brunet
2017-01-17 22:26 ` Jerome Brunet
2017-01-17 22:44 ` Martin Blumenstingl
2017-01-17 22:44 ` Martin Blumenstingl
2017-01-17 22:44 ` Martin Blumenstingl
2017-01-18 19:28 ` Kevin Hilman
2017-01-18 19:28 ` Kevin Hilman
2017-01-18 19:28 ` Kevin Hilman
2017-01-18 19:40 ` Martin Blumenstingl
2017-01-18 19:40 ` Martin Blumenstingl
2017-01-18 19:40 ` Martin Blumenstingl
2017-01-19 9:47 ` Jerome Brunet
2017-01-19 9:47 ` Jerome Brunet
2017-01-19 9:47 ` Jerome Brunet
2017-01-20 13:26 ` [PATCH v2 0/9] " Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 2/9] ARM64: dts: meson-gxbb-p201: " Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:31 ` Neil Armstrong
2017-01-20 13:31 ` Neil Armstrong
2017-01-20 13:31 ` Neil Armstrong
2017-01-20 13:33 ` Martin Blumenstingl
2017-01-20 13:33 ` Martin Blumenstingl
2017-01-20 13:33 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 3/9] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: " Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 5/9] ARM64: dts: meson-gxbb-wetek-hub: " Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 6/9] ARM64: dts: meson-gxbb-wetek-play2: " Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 7/9] ARM64: dts: meson-gxbb-p20x: remove the ethernet node Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` [PATCH v2 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 13:26 ` Martin Blumenstingl
2017-01-20 15:22 ` [PATCH v3 0/9] meson-gx: reset RGMII PHYs and configure TX delay Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` [PATCH v3 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 15:22 ` [PATCH v3 2/9] ARM64: dts: meson-gxbb-p200: " Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 16:18 ` Andrew Lunn
2017-01-20 16:18 ` Andrew Lunn
2017-01-20 16:18 ` Andrew Lunn
2017-01-20 16:21 ` Andrew Lunn
2017-01-20 16:21 ` Andrew Lunn
2017-01-20 16:21 ` Andrew Lunn
2017-01-20 17:07 ` Martin Blumenstingl
2017-01-20 17:07 ` Martin Blumenstingl
2017-01-20 17:07 ` Martin Blumenstingl
2017-01-20 17:46 ` Andrew Lunn
2017-01-20 17:46 ` Andrew Lunn
2017-01-20 17:46 ` Andrew Lunn
2017-01-22 16:48 ` Martin Blumenstingl
2017-01-22 16:48 ` Martin Blumenstingl
2017-01-22 16:48 ` Martin Blumenstingl
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 15:22 ` [PATCH v3 3/9] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` [PATCH v3 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: " Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 15:22 ` [PATCH v3 5/9] ARM64: dts: meson-gxbb-wetek-hub: " Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` [PATCH v3 6/9] ARM64: dts: meson-gxbb-wetek-play2: " Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 16:23 ` Neil Armstrong
2017-01-20 15:22 ` [PATCH v3 7/9] ARM64: dts: meson-gxbb-p201: fix ethernet support Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` [PATCH v3 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 16:34 ` Neil Armstrong
2017-01-20 16:34 ` Neil Armstrong
2017-01-20 16:34 ` Neil Armstrong
2017-01-20 15:22 ` [PATCH v3 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:22 ` Martin Blumenstingl
2017-01-20 15:27 ` [PATCH v3 0/9] meson-gx: reset RGMII PHYs and configure TX delay Jerome Brunet
2017-01-20 15:27 ` Jerome Brunet
2017-01-20 15:27 ` Jerome Brunet
2017-01-20 15:32 ` Martin Blumenstingl
2017-01-20 15:32 ` Martin Blumenstingl
2017-01-20 15:32 ` Martin Blumenstingl
2017-01-20 19:46 ` Kevin Hilman
2017-01-20 19:46 ` Kevin Hilman
2017-01-20 19:46 ` Kevin Hilman
2017-01-22 18:10 ` [PATCH v4 " Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 2/9] ARM64: dts: meson-gxbb-p200: " Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 3/9] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: " Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 5/9] ARM64: dts: meson-gxbb-wetek-hub: " Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 6/9] ARM64: dts: meson-gxbb-wetek-play2: " Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 7/9] ARM64: dts: meson-gxbb-p201: fix ethernet support Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` [PATCH v4 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-22 18:10 ` Martin Blumenstingl
2017-01-23 18:55 ` [PATCH v4 0/9] meson-gx: reset RGMII PHYs and configure TX delay Kevin Hilman
2017-01-23 18:55 ` Kevin Hilman
2017-01-23 18:55 ` Kevin Hilman
2017-01-23 19:02 ` Martin Blumenstingl
2017-01-23 19:02 ` Martin Blumenstingl
2017-01-23 19:02 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 " Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 2/9] ARM64: dts: meson-gxbb-p200: " Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 3/9] ARM64: dts: meson-gxbb-vega-s95: " Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: " Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 5/9] ARM64: dts: meson-gxbb-wetek-hub: " Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 6/9] ARM64: dts: meson-gxbb-wetek-play2: " Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 7/9] ARM64: dts: meson-gxbb-p201: fix ethernet support Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` [PATCH v5 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-19 21:41 ` Martin Blumenstingl
2017-02-20 9:08 ` Jerome Brunet [this message]
2017-02-20 9:08 ` [PATCH v5 0/9] meson-gx: reset RGMII PHYs and configure TX delay Jerome Brunet
2017-02-20 9:08 ` Jerome Brunet
2017-03-02 17:02 ` Kevin Hilman
2017-03-02 17:02 ` Kevin Hilman
2017-03-02 17:02 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1487581719.3734.1.camel@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.