From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ley Foon Tan Date: Tue, 07 Mar 2017 10:52:58 +0800 Subject: [U-Boot] [PATCH 15/20] drivers: Makefile: include fpga build in SPL In-Reply-To: References: <1487756858-16730-1-git-send-email-ley.foon.tan@intel.com> <1487756858-16730-16-git-send-email-ley.foon.tan@intel.com> <3cdaabc0-1c2c-4f25-9efa-700a947232b6@denx.de> Message-ID: <1488855178.2433.26.camel@intel.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit To: u-boot@lists.denx.de On Isn, 2017-02-27 at 17:06 +0100, Michal Simek wrote: > On 25.2.2017 22:44, Marek Vasut wrote: > > > > On 02/22/2017 10:47 AM, Ley Foon Tan wrote: > > > > > > Arria 10 SPL needs the drivers/fpga. > > > > > > Signed-off-by: Tien Fong Chee > > > Signed-off-by: Ley Foon Tan > > > --- > > >  drivers/Makefile | 1 + > > +CC Michal and Moritz, they did some FPGA/SPL work too. > > > > > > > >  1 file changed, 1 insertion(+) > > > > > > diff --git a/drivers/Makefile b/drivers/Makefile > > > index 34c55bf..6e7a2c3 100644 > > > --- a/drivers/Makefile > > > +++ b/drivers/Makefile > > > @@ -47,6 +47,7 @@ obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/ > > >  obj-$(CONFIG_SPL_SATA_SUPPORT) += block/ > > >  obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/ > > >  obj-$(CONFIG_SPL_MMC_SUPPORT) += block/ > > > +obj-$(CONFIG_FPGA) += fpga/ > > >  endif > > >   > > >  ifdef CONFIG_TPL_BUILD > > > > > > I prefer if you can separate these fpga stuff out of this huge > series. > This patch doesn't make sense without content. > > I can't see that code which requires this. > The biggest questions here are where are you calling fpga code and > where > are you taking bitstream from? > > Thanks, > Michal > > Okay, will drop this patch from this series. Thanks. Regards Ley Foon