From: <gregkh@linuxfoundation.org>
To: alexandre.belloni@free-electrons.com, gregkh@linuxfoundation.org,
sre@kernel.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "power: reset: at91-poweroff: timely shutdown LPDDR memories" has been added to the 4.10-stable tree
Date: Wed, 08 Mar 2017 14:11:56 +0100 [thread overview]
Message-ID: <148897871650216@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
power: reset: at91-poweroff: timely shutdown LPDDR memories
to the 4.10-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
power-reset-at91-poweroff-timely-shutdown-lpddr-memories.patch
and it can be found in the queue-4.10 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 0b0408745e7ff24757cbfd571d69026c0ddb803c Mon Sep 17 00:00:00 2001
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Date: Tue, 25 Oct 2016 11:37:59 +0200
Subject: power: reset: at91-poweroff: timely shutdown LPDDR memories
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
commit 0b0408745e7ff24757cbfd571d69026c0ddb803c upstream.
LPDDR memories can only handle up to 400 uncontrolled power off. Ensure the
proper power off sequence is used before shutting down the platform.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/power/reset/Kconfig | 2 -
drivers/power/reset/at91-poweroff.c | 54 ++++++++++++++++++++++++++++++-
drivers/power/reset/at91-sama5d2_shdwc.c | 49 +++++++++++++++++++++++++++-
3 files changed, 102 insertions(+), 3 deletions(-)
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -32,7 +32,7 @@ config POWER_RESET_AT91_RESET
config POWER_RESET_AT91_SAMA5D2_SHDWC
tristate "Atmel AT91 SAMA5D2-Compatible shutdown controller driver"
- depends on ARCH_AT91 || COMPILE_TEST
+ depends on ARCH_AT91
default SOC_SAMA5
help
This driver supports the alternate shutdown controller for some Atmel
--- a/drivers/power/reset/at91-poweroff.c
+++ b/drivers/power/reset/at91-poweroff.c
@@ -14,9 +14,12 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/printk.h>
+#include <soc/at91/at91sam9_ddrsdr.h>
+
#define AT91_SHDW_CR 0x00 /* Shut Down Control Register */
#define AT91_SHDW_SHDW BIT(0) /* Shut Down command */
#define AT91_SHDW_KEY (0xa5 << 24) /* KEY Password */
@@ -50,6 +53,7 @@ static const char *shdwc_wakeup_modes[]
static void __iomem *at91_shdwc_base;
static struct clk *sclk;
+static void __iomem *mpddrc_base;
static void __init at91_wakeup_status(void)
{
@@ -73,6 +77,29 @@ static void at91_poweroff(void)
writel(AT91_SHDW_KEY | AT91_SHDW_SHDW, at91_shdwc_base + AT91_SHDW_CR);
}
+static void at91_lpddr_poweroff(void)
+{
+ asm volatile(
+ /* Align to cache lines */
+ ".balign 32\n\t"
+
+ /* Ensure AT91_SHDW_CR is in the TLB by reading it */
+ " ldr r6, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t"
+
+ /* Power down SDRAM0 */
+ " str %1, [%0, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t"
+ /* Shutdown CPU */
+ " str %3, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t"
+
+ " b .\n\t"
+ :
+ : "r" (mpddrc_base),
+ "r" cpu_to_le32(AT91_DDRSDRC_LPDDR2_PWOFF),
+ "r" (at91_shdwc_base),
+ "r" cpu_to_le32(AT91_SHDW_KEY | AT91_SHDW_SHDW)
+ : "r0");
+}
+
static int at91_poweroff_get_wakeup_mode(struct device_node *np)
{
const char *pm;
@@ -124,6 +151,8 @@ static void at91_poweroff_dt_set_wakeup_
static int __init at91_poweroff_probe(struct platform_device *pdev)
{
struct resource *res;
+ struct device_node *np;
+ u32 ddr_type;
int ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -150,12 +179,30 @@ static int __init at91_poweroff_probe(st
pm_power_off = at91_poweroff;
+ np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc");
+ if (!np)
+ return 0;
+
+ mpddrc_base = of_iomap(np, 0);
+ of_node_put(np);
+
+ if (!mpddrc_base)
+ return 0;
+
+ ddr_type = readl(mpddrc_base + AT91_DDRSDRC_MDR) & AT91_DDRSDRC_MD;
+ if ((ddr_type == AT91_DDRSDRC_MD_LPDDR2) ||
+ (ddr_type == AT91_DDRSDRC_MD_LPDDR3))
+ pm_power_off = at91_lpddr_poweroff;
+ else
+ iounmap(mpddrc_base);
+
return 0;
}
static int __exit at91_poweroff_remove(struct platform_device *pdev)
{
- if (pm_power_off == at91_poweroff)
+ if (pm_power_off == at91_poweroff ||
+ pm_power_off == at91_lpddr_poweroff)
pm_power_off = NULL;
clk_disable_unprepare(sclk);
@@ -163,6 +210,11 @@ static int __exit at91_poweroff_remove(s
return 0;
}
+static const struct of_device_id at91_ramc_of_match[] = {
+ { .compatible = "atmel,sama5d3-ddramc", },
+ { /* sentinel */ }
+};
+
static const struct of_device_id at91_poweroff_of_match[] = {
{ .compatible = "atmel,at91sam9260-shdwc", },
{ .compatible = "atmel,at91sam9rl-shdwc", },
--- a/drivers/power/reset/at91-sama5d2_shdwc.c
+++ b/drivers/power/reset/at91-sama5d2_shdwc.c
@@ -22,9 +22,12 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/printk.h>
+#include <soc/at91/at91sam9_ddrsdr.h>
+
#define SLOW_CLOCK_FREQ 32768
#define AT91_SHDW_CR 0x00 /* Shut Down Control Register */
@@ -75,6 +78,7 @@ struct shdwc {
*/
static struct shdwc *at91_shdwc;
static struct clk *sclk;
+static void __iomem *mpddrc_base;
static const unsigned long long sdwc_dbc_period[] = {
0, 3, 32, 512, 4096, 32768,
@@ -108,6 +112,29 @@ static void at91_poweroff(void)
at91_shdwc->at91_shdwc_base + AT91_SHDW_CR);
}
+static void at91_lpddr_poweroff(void)
+{
+ asm volatile(
+ /* Align to cache lines */
+ ".balign 32\n\t"
+
+ /* Ensure AT91_SHDW_CR is in the TLB by reading it */
+ " ldr r6, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t"
+
+ /* Power down SDRAM0 */
+ " str %1, [%0, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t"
+ /* Shutdown CPU */
+ " str %3, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t"
+
+ " b .\n\t"
+ :
+ : "r" (mpddrc_base),
+ "r" cpu_to_le32(AT91_DDRSDRC_LPDDR2_PWOFF),
+ "r" (at91_shdwc->at91_shdwc_base),
+ "r" cpu_to_le32(AT91_SHDW_KEY | AT91_SHDW_SHDW)
+ : "r0");
+}
+
static u32 at91_shdwc_debouncer_value(struct platform_device *pdev,
u32 in_period_us)
{
@@ -212,6 +239,8 @@ static int __init at91_shdwc_probe(struc
{
struct resource *res;
const struct of_device_id *match;
+ struct device_node *np;
+ u32 ddr_type;
int ret;
if (!pdev->dev.of_node)
@@ -249,6 +278,23 @@ static int __init at91_shdwc_probe(struc
pm_power_off = at91_poweroff;
+ np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc");
+ if (!np)
+ return 0;
+
+ mpddrc_base = of_iomap(np, 0);
+ of_node_put(np);
+
+ if (!mpddrc_base)
+ return 0;
+
+ ddr_type = readl(mpddrc_base + AT91_DDRSDRC_MDR) & AT91_DDRSDRC_MD;
+ if ((ddr_type == AT91_DDRSDRC_MD_LPDDR2) ||
+ (ddr_type == AT91_DDRSDRC_MD_LPDDR3))
+ pm_power_off = at91_lpddr_poweroff;
+ else
+ iounmap(mpddrc_base);
+
return 0;
}
@@ -256,7 +302,8 @@ static int __exit at91_shdwc_remove(stru
{
struct shdwc *shdw = platform_get_drvdata(pdev);
- if (pm_power_off == at91_poweroff)
+ if (pm_power_off == at91_poweroff ||
+ pm_power_off == at91_lpddr_poweroff)
pm_power_off = NULL;
/* Reset values to disable wake-up features */
Patches currently in stable-queue which might be from alexandre.belloni@free-electrons.com are
queue-4.10/power-reset-at91-poweroff-timely-shutdown-lpddr-memories.patch
queue-4.10/arm-dts-at91-enable-dma-on-sama5d4_xplained-console.patch
queue-4.10/arm-at91-define-lpddr-types.patch
queue-4.10/arm-dts-at91-enable-dma-on-sama5d2_xplained-console.patch
reply other threads:[~2017-03-08 13:12 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=148897871650216@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=alexandre.belloni@free-electrons.com \
--cc=sre@kernel.org \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.