All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: dave.jiang@intel.com, dan.j.williams@intel.com,
	jmoyer@redhat.com, stable@vger.kernel.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] device-dax: fix pmd/pte fault fallback handling" failed to apply to 4.9-stable tree
Date: Fri, 24 Mar 2017 15:37:42 +0100	[thread overview]
Message-ID: <14903662626379@kroah.com> (raw)


The patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

>From 0134ed4fb9e78672ee9f7b18007114404c81e63f Mon Sep 17 00:00:00 2001
From: Dave Jiang <dave.jiang@intel.com>
Date: Fri, 10 Mar 2017 13:24:22 -0700
Subject: [PATCH] device-dax: fix pmd/pte fault fallback handling

Jeff Moyer reports:

    With a device dax alignment of 4KB or 2MB, I get sigbus when running
    the attached fio job file for the current kernel (4.11.0-rc1+).  If
    I specify an alignment of 1GB, it works.

    I turned on debug output, and saw that it was failing in the huge
    fault code.

     dax dax1.0: dax_open
     dax dax1.0: dax_mmap
     dax dax1.0: dax_dev_huge_fault: fio: write (0x7f08f0a00000 -
     dax dax1.0: __dax_dev_pud_fault: phys_to_pgoff(0xffffffffcf60
     dax dax1.0: dax_release

    fio config for reproduce:
    [global]
    ioengine=dev-dax
    direct=0
    filename=/dev/dax0.0
    bs=2m

    [write]
    rw=write

    [read]
    stonewall
    rw=read

The driver fails to fallback when taking a fault that is larger than
the device alignment, or handling a larger fault when a smaller
mapping is already established. While we could support larger
mappings for a device with a smaller alignment, that change is
too large for the immediate fix. The simplest change is to force
fallback until the fault size matches the alignment.

Fixes: dee410792419 ("/dev/dax, core: file operations and dax-mmap")
Cc: <stable@vger.kernel.org>
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

diff --git a/drivers/dax/dax.c b/drivers/dax/dax.c
index 8d9829ff2a78..a284dc532e46 100644
--- a/drivers/dax/dax.c
+++ b/drivers/dax/dax.c
@@ -427,6 +427,7 @@ static int __dax_dev_pte_fault(struct dax_dev *dax_dev, struct vm_fault *vmf)
 	int rc = VM_FAULT_SIGBUS;
 	phys_addr_t phys;
 	pfn_t pfn;
+	unsigned int fault_size = PAGE_SIZE;
 
 	if (check_vma(dax_dev, vmf->vma, __func__))
 		return VM_FAULT_SIGBUS;
@@ -437,6 +438,9 @@ static int __dax_dev_pte_fault(struct dax_dev *dax_dev, struct vm_fault *vmf)
 		return VM_FAULT_SIGBUS;
 	}
 
+	if (fault_size != dax_region->align)
+		return VM_FAULT_SIGBUS;
+
 	phys = pgoff_to_phys(dax_dev, vmf->pgoff, PAGE_SIZE);
 	if (phys == -1) {
 		dev_dbg(dev, "%s: phys_to_pgoff(%#lx) failed\n", __func__,
@@ -464,6 +468,7 @@ static int __dax_dev_pmd_fault(struct dax_dev *dax_dev, struct vm_fault *vmf)
 	phys_addr_t phys;
 	pgoff_t pgoff;
 	pfn_t pfn;
+	unsigned int fault_size = PMD_SIZE;
 
 	if (check_vma(dax_dev, vmf->vma, __func__))
 		return VM_FAULT_SIGBUS;
@@ -480,6 +485,16 @@ static int __dax_dev_pmd_fault(struct dax_dev *dax_dev, struct vm_fault *vmf)
 		return VM_FAULT_SIGBUS;
 	}
 
+	if (fault_size < dax_region->align)
+		return VM_FAULT_SIGBUS;
+	else if (fault_size > dax_region->align)
+		return VM_FAULT_FALLBACK;
+
+	/* if we are outside of the VMA */
+	if (pmd_addr < vmf->vma->vm_start ||
+			(pmd_addr + PMD_SIZE) > vmf->vma->vm_end)
+		return VM_FAULT_SIGBUS;
+
 	pgoff = linear_page_index(vmf->vma, pmd_addr);
 	phys = pgoff_to_phys(dax_dev, pgoff, PMD_SIZE);
 	if (phys == -1) {

                 reply	other threads:[~2017-03-24 14:38 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=14903662626379@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=dan.j.williams@intel.com \
    --cc=dave.jiang@intel.com \
    --cc=jmoyer@redhat.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.