Patch "crypto: ccp - Assign DMA commands to the channel's CCP" has been added to the 4.10-stable tree

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    crypto: ccp - Assign DMA commands to the channel's CCP

to the 4.10-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     crypto-ccp-assign-dma-commands-to-the-channel-s-ccp.patch
and it can be found in the queue-4.10 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 7c468447f40645fbf2a033dfdaa92b1957130d50 Mon Sep 17 00:00:00 2001
From: Gary R Hook <ghook@amd.com>
Date: Fri, 10 Mar 2017 12:28:18 -0600
Subject: crypto: ccp - Assign DMA commands to the channel's CCP

From: Gary R Hook <ghook@amd.com>

commit 7c468447f40645fbf2a033dfdaa92b1957130d50 upstream.

The CCP driver generally uses a round-robin approach when
assigning operations to available CCPs. For the DMA engine,
however, the DMA mappings of the SGs are associated with a
specific CCP. When an IOMMU is enabled, the IOMMU is
programmed based on this specific device.

If the DMA operations are not performed by that specific
CCP then addressing errors and I/O page faults will occur.

Update the CCP driver to allow a specific CCP device to be
requested for an operation and use this in the DMA engine
support.

Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/ccp/ccp-dev.c       |    5 ++++-
 drivers/crypto/ccp/ccp-dmaengine.c |    1 +
 include/linux/ccp.h                |    2 +-
 3 files changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/crypto/ccp/ccp-dev.c
+++ b/drivers/crypto/ccp/ccp-dev.c
@@ -283,11 +283,14 @@ EXPORT_SYMBOL_GPL(ccp_version);
  */
 int ccp_enqueue_cmd(struct ccp_cmd *cmd)
 {
-	struct ccp_device *ccp = ccp_get_device();
+	struct ccp_device *ccp;
 	unsigned long flags;
 	unsigned int i;
 	int ret;
 
+	/* Some commands might need to be sent to a specific device */
+	ccp = cmd->ccp ? cmd->ccp : ccp_get_device();
+
 	if (!ccp)
 		return -ENODEV;
 
--- a/drivers/crypto/ccp/ccp-dmaengine.c
+++ b/drivers/crypto/ccp/ccp-dmaengine.c
@@ -390,6 +390,7 @@ static struct ccp_dma_desc *ccp_create_d
 			goto err;
 
 		ccp_cmd = &cmd->ccp_cmd;
+		ccp_cmd->ccp = chan->ccp;
 		ccp_pt = &ccp_cmd->u.passthru_nomap;
 		ccp_cmd->flags = CCP_CMD_MAY_BACKLOG;
 		ccp_cmd->flags |= CCP_CMD_PASSTHRU_NO_DMA_MAP;
--- a/include/linux/ccp.h
+++ b/include/linux/ccp.h
@@ -556,7 +556,7 @@ enum ccp_engine {
  * struct ccp_cmd - CCP operation request
  * @entry: list element (ccp driver use only)
  * @work: work element used for callbacks (ccp driver use only)
- * @ccp: CCP device to be run on (ccp driver use only)
+ * @ccp: CCP device to be run on
  * @ret: operation return code (ccp driver use only)
  * @flags: cmd processing flags
  * @engine: CCP operation to perform


Patches currently in stable-queue which might be from ghook@amd.com are

queue-4.10/crypto-ccp-assign-dma-commands-to-the-channel-s-ccp.patch