From: <gregkh@linuxfoundation.org>
To: ben@decadent.org.uk, davem@davemloft.net, gregkh@linuxfoundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "catc: Combine failure cleanup code in catc_probe()" has been added to the 4.4-stable tree
Date: Wed, 19 Apr 2017 14:39:55 +0200 [thread overview]
Message-ID: <149260559521424@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
catc: Combine failure cleanup code in catc_probe()
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
catc-combine-failure-cleanup-code-in-catc_probe.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From d41149145f98fe26dcd0bfd1d6cc095e6e041418 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <ben@decadent.org.uk>
Date: Sat, 4 Feb 2017 16:56:56 +0000
Subject: catc: Combine failure cleanup code in catc_probe()
From: Ben Hutchings <ben@decadent.org.uk>
commit d41149145f98fe26dcd0bfd1d6cc095e6e041418 upstream.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/usb/catc.c | 33 +++++++++++++++++----------------
1 file changed, 17 insertions(+), 16 deletions(-)
--- a/drivers/net/usb/catc.c
+++ b/drivers/net/usb/catc.c
@@ -777,7 +777,7 @@ static int catc_probe(struct usb_interfa
struct net_device *netdev;
struct catc *catc;
u8 broadcast[ETH_ALEN];
- int i, pktsz;
+ int i, pktsz, ret;
if (usb_set_interface(usbdev,
intf->altsetting->desc.bInterfaceNumber, 1)) {
@@ -812,12 +812,8 @@ static int catc_probe(struct usb_interfa
if ((!catc->ctrl_urb) || (!catc->tx_urb) ||
(!catc->rx_urb) || (!catc->irq_urb)) {
dev_err(&intf->dev, "No free urbs available.\n");
- usb_free_urb(catc->ctrl_urb);
- usb_free_urb(catc->tx_urb);
- usb_free_urb(catc->rx_urb);
- usb_free_urb(catc->irq_urb);
- free_netdev(netdev);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto fail_free;
}
/* The F5U011 has the same vendor/product as the netmate but a device version of 0x130 */
@@ -914,16 +910,21 @@ static int catc_probe(struct usb_interfa
usb_set_intfdata(intf, catc);
SET_NETDEV_DEV(netdev, &intf->dev);
- if (register_netdev(netdev) != 0) {
- usb_set_intfdata(intf, NULL);
- usb_free_urb(catc->ctrl_urb);
- usb_free_urb(catc->tx_urb);
- usb_free_urb(catc->rx_urb);
- usb_free_urb(catc->irq_urb);
- free_netdev(netdev);
- return -EIO;
- }
+ ret = register_netdev(netdev);
+ if (ret)
+ goto fail_clear_intfdata;
+
return 0;
+
+fail_clear_intfdata:
+ usb_set_intfdata(intf, NULL);
+fail_free:
+ usb_free_urb(catc->ctrl_urb);
+ usb_free_urb(catc->tx_urb);
+ usb_free_urb(catc->rx_urb);
+ usb_free_urb(catc->irq_urb);
+ free_netdev(netdev);
+ return ret;
}
static void catc_disconnect(struct usb_interface *intf)
Patches currently in stable-queue which might be from ben@decadent.org.uk are
queue-4.4/dvb-usb-firmware-don-t-do-dma-on-stack.patch
queue-4.4/dvb-usb-don-t-use-stack-for-firmware-load.patch
queue-4.4/catc-combine-failure-cleanup-code-in-catc_probe.patch
queue-4.4/acpi-nfit-libnvdimm-fix-interleave-set-cookie-calculation-64-bit-comparison.patch
queue-4.4/virtio-console-avoid-dma-from-stack.patch
queue-4.4/rtc-tegra-implement-clock-handling.patch
queue-4.4/dvb-usb-v2-avoid-use-after-free.patch
queue-4.4/platform-x86-acer-wmi-setup-accelerometer-when-machine-has-appropriate-notify-event.patch
queue-4.4/catc-use-heap-buffer-for-memory-size-test.patch
queue-4.4/pegasus-use-heap-buffers-for-all-register-access.patch
queue-4.4/kvm-fix-page-struct-leak-in-handle_vmon.patch
queue-4.4/rtl8150-use-heap-buffers-for-all-register-access.patch
reply other threads:[~2017-04-19 12:40 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=149260559521424@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=ben@decadent.org.uk \
--cc=davem@davemloft.net \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.